This is the Lua component to make the Mudlet Mapper work for IRE games. You'll need to import the xml below in order for autowalking to work on Achaea, Aetolia, Lusternia, Imperian, or Midkemia Online.

Download

latest version (updated May 16th, 2011)

Installing

make sure you're using a version of Mudlet that has a mapper (either a Map button or a Toolbox -> Show Map option)
import this script
done!

Updating

To update the xml, firstly delete all the Mudlet Mapper trigger, alias and script folders. Then, download the new xml and import it.

To make Mudlet re-download the map, close Mudlet, find the ~/.config/mudlet/profiles/<your profile>/map folder and delete it. ~ is your home folder. Start Mudlet again, click the Map button and it'll download the latest map.

Mapper changelog is available here.

Aliases

common

goto <id> - goes to a room of that id
mpp [on|off] - toggles or sets mapper to be paused
mstop - stops the mapper completely
rf <name>, room find <name> - searches for a room of a given name
area list - shows the known area list
room list <area> - shows the list of rooms in an area
arealock, arealock <area> - displays a list of areas you can lock/unlock, can also give it an area name to filter by
rl, rl <room name or room id>, room look, room look <room name or room id> - displays information about a room

mapping

It's best that you always have the latest version of Mudlet 2.0 release candidate installed while mapping (especially not rc4, which was buggy), along with the latest version of this script - because both are still very much in progress and are updated and improved often. Feel free to submit feedback on the mapping script on the forums, or even improve it yourself as all the code is available. General Mudlet Mapper feedback is welcomed as well.

mc - toggle mapping mode

Usage: *mc or map create <option>*, where option can be "on" or "off". Turning the mapping mode on enables the mapping aliases, along with several automapping things (that rely on GMCP being enabled):

room creation - if you enter a room that's not mapped yet, it'll map it
exit creation - if there is an unmapped exit in the room, the mapper will auto-link it to another room (and create that other room if it doesn't exist yet)
exit deletion - if the mapper knows about an exit that doesn't really exist, it'll remove it

rlc - create a room

Usage: *rlc or room create <option>*, where option will specify the location of the new room. The new room will be auto-linked to the current one, be placed in the same area and take on the same environment type. If the mapper doesn't currently know where you are, you'll have to specify the exact coordinates that you'd like to place the room at (0x,0y,0z is a good place to start at). You can specify the location via several ways:

relative direction - ie 'rlc n' will create the room north of you, 'rlc se s' will create the room south-east and south of you.
exact coordinates - ie 'rlc 1 -5 10' will create the room at those exact coordinates. If the mapper doesn't know where you currently are, it'll also assume that you're located in that room now.
exact coordinates + specific ID - ie 'rlc v34 0 0 0' will create a new room with that exact ID (best to use one from the game, which you can find by doing 'rl') at the center.
partial coordinates - ie 'rlc 14x 5y' will create the room at 14x and 5y, but the same z-level you're on. You can can include all three of x,y,z coordinates or only one as you wish.

rc - move a room

Usage: *rc or room coords [v<id>] <option>*, where option will specify the new location of the room. The room ID is optional, it'll move the current room if you don't provide one. Sample use:

relative direction - ie 'rc nw' will move the room to be nw of the current location, 'rlc e s' will create the room east and south of the current location, and 'rc v34 w' will move the room ID 34 west
exact coordinates - ie 'rc 1 -5 10' will move the current room to those exact coordinates. 'rc v12 8 3 -8' will move the room with ID 12 to 8x, 3y and -8z.
partial coordinates - ie 'rc 14x 5y' will move the room to be at 14x and 5y, but the same z-level you're on. You can can include all three of x,y,z coordinates or only one as you wish

rld - delete a room

Usage *rld or room delete <option>", where option is the location or ID of the room you'd like to delete. Sample use:

relative direction - ie 'rld n' will delete the room that's north of you
exact room ID - ie 'rld 513' will delete the room with ID 513
current room - ie 'rld' will delete the room you're currently in

rlk - link rooms

Usage: *rlk or room link <option>*, where option will specify the room and exit to link with. You can do this in several ways:

exact room ID and direction - ie 'rlk 351 n' will link the current room to room #351 via a north exit
relative direction - ie 'rlk n' will link, if there is, a room to the north of this one to the one you're in

urlk - unlink rooms

Usage: *urlk or room unlink <direction>*, where direction will specify the direction of the exit to unlink. This function will unlink exits both ways, or one way if there is no incoming exit. Sample use:

relative direction - ie 'urlk nw' will unlink the exit to the northwest, and from the northwest room to the southeast

spe - link rooms via special commands

Usage: *spe or exit special <other room> <command>*, where other room will specify the room to link with, and command the command to us to get to that room. Sample use:

relative direction - ie 'spe n push rock' will go to the room by doing 'push rock'
exact room ID - ie 'spe 125 pull lever' will go to room 125 from the current one by pulling a lever

spe clear - unlink all special command links

Usage: *spe clear or exit special clear <option>*, where option is the location or the ID of the room you'd like to clear all special exits in. Sample use:

relative direction - ie 'spe clear n' will delete all special exits in the room that's north of you
exact room ID - ie 'spe clear 513' will delete all special exits in room with ID 513
current room - ie 'spe clear' will delete all special exits in the room you're currently in

room area - move room to another area

Usage: *room area <different area>* will move the current room to another area you're in. Sample use:

area name - ie 'room area glomdoring' will move the room you're currently standing in to Glomdoring. You can also specify another room to move with 'room area v# <area>', ie 'room area 1 my new area'

area add - create a new area

Usage: *area add <area name>* will create a new area and automatically give it an ID. Sample use:

area name - ie 'area add Mrr city' will create a new area called such

area rename - rename an area

Usage: *area rename <new area name>* will rename the current area you're in to the new name. Sample use:

area name - ie 'area rename Bobcat place* will call the area you're in like so from now on

area delete - delete an area

Usage: *area delete <area name>* will delete the given area. Sample use:

area name - ie 'area delete Bobcat place* will delete such an area

map save - save the map

Usage: *map save <optional name>* will save all of the map. Sample use:

default map - ie 'map save' will save the map with the default name as the latest one
map name - ie 'map save map before experiment' will save the map with that name

map load - load the map

Usage: *map load <optional name>* will reload the map. Sample use:

default map - ie 'map load' will load the latest saved map (it may be a named one)
map name - ie 'map load before experiment' will load the map with that name

API

functions

mudlet events

mmapper failed path - tried to go from A to B, but failed because there is no known path (or we were walking, got moved offcourse, and can't get to the destination anymore)
mmapper arrived - arrived at our destination successfully
mmapper stopped - mapper's stop function was called (this will be raised anytime it was, even if we weren't moving)
mmapper updated pdb - mmp.pdb table was updated with new data

Developers

Code is hosted on a bzr branch in launchpad.net, mapper-lua. If you'd like to help develop, please feel free to create a branch, add your changes, and then request a merge of your code!

Credit to: Sidd (for sharing his own mapping aliases that came before any documentation existed)

What else needs to be done

General things that need work are triggers for where room detection is necessary - player-locating abilities, shrine defilement warnings, mindsense area reports, etc. The general format is that the room ID should be prefixed to the line the room name is given + be made clickable - so the player can click on it and go. An example is provided for the Lusternian scent ability that implements this. Also needs to recognize the need to swim, right now if you don't have waterwalking - it'll loop trying to walk. Another small problem is that if it gets off the path once, it'll keep saying that it ended up off the path, and not realize when it arrived at the location properly (but it does arrive).

I've also started a bit on a person db - it stores the last known locations of players. This is something that is useful to everybody, so it's best that we don't have to keep reimplementing ourselves but use a common version. This requires more triggers to feed it's hunger for data as well!

IRE mapping script

Contents