This page is a translated version of the page Manual:Lua Functions and the translation is 100% complete.

Other languages:

Deutsch • ‎English • ‎Nederlands • ‎Türkçe • ‎français • ‎italiano • ‎polski • ‎suomi • ‎Ελληνικά • ‎русский • ‎العربية • ‎한국어

Here you can find a long list of all possible Lua functions and programming interfaces (API) that Mudlet offers. Due to the integrated Lua, you can also use all regular Lua functions. In the following page, we will explain the usage, expected behaviour and examples for the functions added in Mudlet.

Global variables

Mudlet defines several global Lua variables that are accessible from anywhere.

Built-in Lua Variables
Variable Name		Description
`command`		This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
`line`		This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
`matches[n]`		This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group. If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] the m-th capture group of the second match.
`multimatches[n][m]`		This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
`mudlet.translations`		Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface. - See translateTable()
`mudlet.key`		Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see tempKey().
`mudlet.keymodifier`		Same as `mudlet.key`, but for keyboard modifiers - Ctrl, Alt, etc.
`mudlet.supports`		Lists special functionality that the users Mudlet supports - right now, just `mudlet.supports.coroutines` is listed. Use `mudlet.supports` to conditionally enable functionality as it's available on the users Mudlet.
`color_table`		Color definitions used by Geyser, cecho, and many other functions - see showColors(). The profile's color preferences are also accessible under the `ansi_` keys.

There are other variables that hold MUD-protocol data that are global as well - see Supported Protocols.

Function Categories

Basic Essential Functions: These functions are generic functions used in normal scripting. These deal with mainly everyday things, like sending stuff and echoing to the screen.

Database Functions: A collection of functions for helping deal with the database.

Date/Time Functions: A collection of functions for handling Date & Time.

File System Functions: A collection of functions for interacting with the file system.

Mapper Functions: A collection of functions that manipulate the mapper and its related features.

Miscellaneous Functions: Miscellaneous functions.

Scripting Object Functions: A collection of arrows that manipulate Mudlets scripting objects - triggers, aliases, and so forth.

Networking Functions: A collection of functions for managing networking.

String Functions: These functions are used to manipulate strings.

Text Functions: These functions are used to access a selected Mudlet/System provided dictionary and a user dictionary that can be specific to a profile or shared between those that chose the shared option.

Table Functions: These functions are used to manipulate tables. Through them you can add to tables, remove values, check if a value is present in the table, check the size of a table, and more.

Text to Speech Functions: These functions are used to create sound from written words. Check out our Text-To-Speech Manual for more detail on how this all works together.

UI Functions: These functions are used to construct custom user GUIs. They deal mainly with miniconsole/label/gauge creation and manipulation as well as displaying or formatting information on the screen.

Basic Essentials

These functions are generic functions used in normal scripting. These deal with mainly everyday things, like sending stuff and echoing to the screen.

debugc

debugc(content): Again this will not send anything to anywhere. It will however print not to the main window, but only to the errors view. You need to open that window to see the message.

display

display(content): This is much like echo, in that is will show text at your screen, not send anything to anywhere. However, it also works with other objects than just text, like a number, table, function, or even many arguments at once. This function is useful to easily take a look at the values of a lua table, for example. If a value is a string of letters, it'll be in quotes, and if it's a number, it won't be quoted.

Note: Do not use this to display information to end-users. It may be hard to read. It is mainly useful for developing/debugging.

myTable = {} -- create an empty lua table
myTable.foo = "Hello there" -- add a text
myTable.bar = 23 -- add a number
myTable.ubar = function () echo("OK") end -- add more stuff
display( myTable ) -- take a look inside the table

echo

echo([miniconsoleName or labelName], text): This function appends text at the end of the current line.

Parameters

miniconsoleName: (optional) the miniconsole to echo to, or:
labelName: (optional) the label to echo to.
text: text you'd like to see printed. You can use \n in an echo to insert a new line. If you're echoing this to a label, you can also use styling to color, center, increase/decrease size of text and various other formatting options as listed here.

Technical Detail

As of Mudlet 4.8+, a single line is capped to 10,000 characters (this is when ~200 at most will fit on one line on your screen).

Example

-- a miniconsole example

-- first, determine the size of your screen
local windowWidth, windowHeight = getMainWindowSize()

-- create the miniconsole
createMiniConsole("sys", windowWidth-650,0,650,300)
setBackgroundColor("sys",255,69,0,255)
setMiniConsoleFontSize("sys", 8)
-- wrap lines in window "sys" at 40 characters per line - somewhere halfway, as an example
setWindowWrap("sys", 40)

echo("sys","Hello world!\n")
cecho("sys", "<:OrangeRed>This is random spam with the same background\n")
cecho("sys", "<blue:OrangeRed>and this is with a blue foreground. ")
cecho("sys", "<bisque:BlueViolet>Lastly, this is with both a foreground and a background.\n")

-- a label example

-- This example creates a transparent overlay message box to show a big warning message "You are under attack!" in the middle 
-- of the screen. Because the background color has a transparency level of 150 (0-255, with 0 being completely transparent 
-- and 255 opaque) the background text can still be read through.
local width, height = getMainWindowSize()
createLabel("messageBox",(width/2)-300,(height/2)-100,250,150,1)
resizeWindow("messageBox",500,70)
moveWindow("messageBox", (width/2)-300,(height/2)-100 )
setBackgroundColor("messageBox", 255, 204, 0, 200)
echo("messageBox", [[<p style="font-size:35px"><b><center><font color="red">You are under attack!</font></center></b></p>]])

printDebug

printDebug(msg, [showStackTrace])

Prints a debug message in green to the error console in the script editor only. Does not echo to the debug window or the main console. Includes stack trace if showStackTrace is included and not nil or false.

See also: printError, debugc

Available in Mudlet4.14+

Technical Note

Note: This will not be echoed to the main console even if the option to echo Lua errors to the main console is turned on. Does not echo to the debug window. As such you can use it for debugging information without fear it will be shown unless someone goes looking for errors.

Parameters

msg:

string to echo to the error console

showStackTrace:

(optional) boolean true if you want to include the stack trace, leave off if you do not.

Example

-- print a debug message to the error console for troubleshooting purposes, when you don't want to echo the information to the main screen.
-- the only difference between this and debugc is this includes information on the script/alias/trigger/etc and line it was called from, whereas debugc does not.
printDebug("Switching to chaos mode")

-- Want to record that something occurred, and include stacktrace so you can see what path the code was taking, but you don't want to halt execution or have it show up in main screen or in scary red.
printDebug("Something unexpected occurred but we can recover from it. Still, we want to be able to notice and troubleshoot it with extra information.", true)

printError

printError(msg, [showStackTrace], [haltExecution])

Prints an error message in red to the error console in the script editor. Can optionally include stacktrace information and halt execution.

See also: printDebug, debugc

Available in Mudlet4.14+

Technical Note

Note: This WILL be echoed to the main console if the option to echo Lua errors to the main console is turned on. You should not use this for idle debugging information, but actual errors that may put big red error lines in the main window.

Parameters

msg:

string to echo to the error console

showStackTrace:

(optional) true if you want to include the stack trace, leave off if you do not.

haltExecution:

(optional) true if you want to halt execution. You must pass a value for showStackTrace in order to halt execution.

Example

-- print an error message but do not include extra stack information or halt execution.
-- this is similar to debugc except it include more information on the place it was called from
-- and will show up in red and echo to the main console if the option for errors to echo there is selected.
printError("Your maxhp is below your currenthp and our game doesn't allow for that. HAX?!")

-- Something bad happened, for sure, but your script can recover.
-- Make sure this is something important enough it might make it to the main window as a big red error.
-- but we are not halting execution, since we can carry on in some capacity
printError("gmcp values for this thing went missing, will carry on using defaults but you should tell somebody about this.", true)

-- print an error message to the error console for troubleshooting purposes. 
-- Prints stack trace for troubleshooting and halts execution (because you cannot continue without the configuration, presumably)
-- similar to using error(msg) but includes the stacktrace information.
printError("Our entire configuration seems to have gone missing!", true, true)

send

send(command, showOnScreen): This sends "command" directly to the network layer, skipping the alias matching. The optional second argument of type boolean (print) determines if the outgoing command is to be echoed on the screen.

Database Functions

These database functions make using a database with Mudlet easier. They are in addition to the LuaSQL sqlite driver that's available directly within Mudlet (also see the LuaSQL manual for comparison).

For a tutorial on how to get started with the database functions, see here.

db:add

db:add(sheet reference, table1, …, tableN): Adds one or more new rows to the specified sheet. If any of these rows would violate a UNIQUE index, a lua error will be thrown and execution will cancel. As such it is advisable that if you use a UNIQUE index, you test those values before you attempt to insert a new row.; Returns nil plus the error message if the operation failed (so it won't raise a runtime error in Mudlet).
Example

--Each table is a series of key-value pairs to set the values of the sheet, 
--but if any keys do not exist then they will be set to nil or the default value.
db:add(mydb.enemies, {name="Bob Smith", city="San Francisco"})
db:add(mydb.enemies,
     {name="John Smith", city="San Francisco"},
     {name="Jane Smith", city="San Francisco"},
     {name="Richard Clark"})
--As you can see, all fields are optional.

-- example that'll show an error if things went wrong:
local ok, err = db:add(mydb.enemies, {name="Bob Smith", city="San Francisco"})
if not ok then
  debugc(f"Error adding to the database: {err}")
  return
end

db:aggregate

db:aggregate(field reference, aggregate function, query, distinct): Returns the result of calling the specified aggregate function on the field and its sheet. The query is optional.; The supported aggregate functions are:

COUNT - Returns the total number of records that are in the sheet or match the query.
AVG - Returns the average of all the numbers in the specified field.
MAX - Returns the highest number in the specified field.
MIN - Returns the lowest number in the specified field.
TOTAL - Returns the value of adding all the contents of the specified field.

Note: You can supply a boolean true for the distinct argument since Mudlet 3.0 to filter by distinct values.

Example

local mydb = db:get_database("my database")
echo(db:aggregate(mydb.enemies.name, "count"))

It can also be used in conjunction with db:like to return a number of results.

Example

local query = matches[2]
local mydb = db:get_database("itemsdab")
local results = db:aggregate(mydb.itemstats.objname, "count", db:like(mydb.itemstats.objname, "%" .. query .. "%"))
cecho("Found <red>"..results.."<reset> items that match the description.")

db:AND

db:AND(sub-expression1, …, sub-expressionN): Returns a compound database expression that combines all of the simple expressions passed into it; these expressions should be generated with other db: functions such as db:eq, db:like, db:lt and the like.; This compound expression will only find items in the sheet if all sub-expressions match.

db:between

db:between(field reference, lower_bound, upper_bound): Returns a database expression to test if the field in the sheet is a value between lower_bound and upper_bound. This only really makes sense for numbers and Timestamps.

db:close

db:close(database name): Closes a database connection so it can't be used anymore.

db:create

db:create(database name, schema table, force): Creates and/or modifies an existing database. This function is safe to define at a top-level of a Mudlet script: in fact it is recommended you run this function at a top-level without any kind of guards as it will also open and return a reference to the database. If the named database does not exist it will create it. If the database does exist then it will add any columns or indexes which didn’t exist before to that database. If the database already has all the specified columns and indexes, it will do nothing. If an existing column with at least one non-NULL value is missing from the new schema, it will raise an error by default; the user may force the dropping of the column by setting the force argument to true.

The database will be called Database_<sanitized database name>.db and will be stored in the Mudlet configuration directory within your profile folder, which you can find with getMudletHomeDir().

Note: Known bug! This function will accept characters other than a-z, but will convert uppercase characters to lower and strip any others including numbers. For example "My DB" and "my-db_2024-07-09" would both result in a database simply named "mydb", as you can imagine this can lead to unexpected behaviour. In order to preserve backward compatibility, there is currently no intention to fix this.

Database tables are called sheets consistently throughout this documentation, to avoid confusion with Lua tables.

The schema table must be a Lua table array containing table dictionaries that define the structure and layout of each sheet. The starting Lua type will determine the type in the database, i.e. if you want to store text set it to = "" and if you want to store a number set it to = 0.

Example

local mydb = db:create("combatLog",
  {
    kills = {
              name = "",
              area = "",
              killed = db:Timestamp("CURRENT_TIMESTAMP"),
              damage = 0,
              _index = { {"name", "area"} }
            },
    enemies = {
                name = "",
                city = "",
                reason = "",
                enemied = db:Timestamp("CURRENT_TIMESTAMP"),
                _index = { "city" },
                _unique = { "name" },
                _violations = "IGNORE"
               }
  })

The above will create a database with two sheets; the first is kills and is used to track every successful kill, with both where and when the kill happened. It has one index, a compound index tracking the combination of name and area. The second sheet has two indexes, but one is unique: it isn’t possible to add two items to the enemies sheet with the same name.

For sheets with unique indexes, you may specify a _violations key to indicate how the db layer handle cases where the data is duplicate (unique index is violated). The options you may use are:

FAIL - the default. A hard error is thrown, cancelling the script.
IGNORE - The command that would add a record that violates uniqueness just fails silently.
REPLACE - The old record which matched the unique index is dropped, and the new one is added to replace it.

Returns a reference of an already existing database. This instance can be used to get references to the sheets (and from there, fields) that are defined within the database. You use these references to construct queries.

If a database has a sheet named enemies, you can obtain a reference to that sheet by doing:

local mydb = db:get_database("myDatabase")
local enemies_ref = mydb.enemieslocal
local name_ref = mydb.enemies.name

Note: db:create() supports adding new columns and indexes to existing databases, but this functionality was broken in Mudlet 2.1 due to the underlying Lua SQL binding used being out of date. When you want to add a new column, you have several options:

if you are just testing and getting setup, close Mudlet, and delete the Database_<sanitized database name>.db file in your Mudlet folder.
if you've already gotten a script and have a fair bit of data with it, or users are already using your script and telling them to delete files on an upgrade is unreasonable, you can use direct SQL to add in a new column. WARNING, this is an expert option, and requires knowledge of SQL to accomplish. You must backup your database file before you start coding this in.

  -- at first, update your db:create schema to have the new field.
  -- then, we'll tell the database to create it if it doesn't exist

  -- fetch the data we've got in our sample database
  local test = db:fetch(ndb.db.people)
  -- this requires at least one entry in the database to work
  if next(test) then
    local _,someperson = next(test)
    
    -- in this example, we want to add an order key. If there is no key, means it doesn't exist yet, so it should be added.
    if someperson.order == nil then
      -- do not do the things you see here elsewhere else. This is a big hack/workaround.
      local conn = db.__conn.namedb
      -- order should be a text field, so note that we specify it's type with TEXT and the default value at the end with ""
      local sql_add = [[ALTER TABLE people ADD COLUMN "order" TEXT NULL DEFAULT ""]]
      conn:execute(sql_add)
      conn:commit()
    end

    -- here is an another example, in one where we need to add a field that is a number
    if someperson.dragon == nil then
      local conn = db.__conn.namedb
      -- observe that we use the REAL type by default instead and a default of 0
      local sql_add = [[ALTER TABLE people ADD COLUMN "dragon" REAL NULL DEFAULT 0]]
      conn:execute(sql_add)
      conn:commit()
    end
  end

db:delete

db:delete(sheet reference, query): Deletes rows from the specified sheet. The argument for query tries to be intelligent:

If it is a simple number, it deletes a specific row by _row_id
If it is a table that contains a _row_id (e.g., a table returned by db:get) it deletes just that record.
Otherwise, it deletes every record which matches the query pattern which is specified as with db:gt.
If the query is simply true, then it will truncate the entire contents of the sheet.

Example

enemies = db:fetch(mydb.enemies)
db:delete(mydb.enemies, enemies[1])

db:delete(mydb.enemies, enemies[1]._row_id)
db:delete(mydb.enemies, 5)
db:delete(mydb.enemies, db:eq(mydb.enemies.city, "San Francisco"))
db:delete(mydb.enemies, true)

Those deletion commands will do in order:

one When passed an actual result table that was obtained from db:fetch, it will delete the record for that table.
two When passed a number, will delete the record for that _row_id. This example shows getting the row id from a table.
three As above, but this example just passes in the row id directly.
four Here, we will delete anything which matches the same kind of query as db:fetch uses-- namely, anyone who is in the city of San Francisco.
five And finally, we will delete the entire contents of the enemies table.

db:eq

db:eq(field reference, value): Returns a database expression to test if the field in the sheet is equal to the value.

db:exp

db:exp(string): Returns the string as-is to the database.; Use this function with caution, but it is very useful in some circumstances. One of the most common of such is incrementing an existing field in a db:set() operation, as so:

db:set(mydb.enemies, db:exp("kills + 1"), db:eq(mydb.enemies.name, "Ixokai"))

This will increment the value of the kills field for the row identified by the name Ixokai.

But there are other uses, as the underlining database layer provides many functions you can call to do certain things. If you want to get a list of all your enemies who have a name longer then 10 characters, you may do:

db:fetch(mydb.enemies, db:exp("length(name) > 10"))

Again, take special care with this, as you are doing SQL syntax directly and the library can’t help you get things right.

db:fetch

db:fetch(sheet reference, query, order_by, descending): Returns a table array containing a table for each matching row in the specified sheet. All arguments but sheet are optional. If query is nil, the entire contents of the sheet will be returned.; Query is a string which should be built by calling the various db: expression functions, such as db:eq, db:AND, and such. You may pass a SQL WHERE clause here if you wish, but doing so is very dangerous. If you don’t know SQL well, its best to build the expression.; Query may also be a table array of such expressions, if so they will be AND’d together implicitly.; The results that are returned are not in any guaranteed order, though they are usually the same order as the records were inserted. If you want to rely on the order in any way, you must pass a value to the order_by field. This must be a table array listing the fields you want to sort by. It can be { mydb.kills.area }, or { mydb.kills.area, mydb.kills.name }; The results are returned in ascending (smallest to largest) order; to reverse this pass true into the final field.

Example

db:fetch(mydb.enemies, nil, {mydb.enemies.city, mydb.enemies.name})
db:fetch(mydb.enemies, db:eq(mydb.enemies.city, "San Francisco"))
db:fetch(mydb.kills,
     {db:eq(mydb.kills.area, "Undervault"),
     db:like(mydb.kills.name, "%Drow%")}
)

The first will fetch all of your enemies, sorted first by the city they reside in and then by their name.

The second will fetch only the enemies which are in San Francisco.

The third will fetch all the things you’ve killed in Undervault which have Drow in their name.

db:fetch_sql

db:fetch_sql(sheet reference, sql string): Allows to run db:fetch with hand crafted sql statements.

When you have a large number of objects in your database, you may want an alternative method of accessing them. In this case, you can first obtain a list of the _row_id for the objects that match your query with the following alias:

Example

local mydb = db:get_database("itemsdab")
local query = matches[2]
local t = {}
res = db:fetch(mydb.itemstats, db:query_by_example(mydb.itemstats, {objname = "%" .. query .. "%"}))
for k, v in pairs(res) do
  print(v._row_id)
  table.insert(t,v._row_id)
end
handoff = table.concat(t, "|")
display(handoff)

Then you can use the following code in a separate alias to query your database using the previously retrieved _row_id.
Example

local mydb = db:get_database("itemsdab")
local query = matches[2]
display(db:fetch_sql(mydb.itemstats, "select * from itemstats where _row_id ="..query))
--This alias is used to query a database by _row_id

db:gt

db:gt(field reference, value): Returns a database expression to test if the field in the sheet is greater than to the value.

db:get_database

db:get_database(database_name): Returns a reference of an already existing database. This instance can be used to get references to the sheets (and from there, fields) that are defined within the database. You use these references to construct queries. These references do not contain any actual data, they only point to parts of the database structure.

Example

local mydb = db:get_database("my database")
local enemies_ref = mydb.enemies
local name_ref = mydb.enemies.name

db:gte

db:gte(field reference, value): Returns a database expression to test if the field in the sheet is greater than or equal to the value.

db:in_

db:in_(field reference, table array): Returns a database expression to test if the field in the sheet is one of the values in the table array.; First, note the trailing underscore carefully! It is required.; The following example illustrates the use of in_:

local mydb = db:get_database("my database")
local areas = {"Undervault", "Hell", "Purgatory"}

db:fetch(mydb.kills, db:in_(mydb.kills.area, areas))

This will obtain all of your kills which happened in the Undervault, Hell or Purgatory. Every db:in_ expression can be written as a db:OR, but that quite often gets very complex.

db:is_nil

db:is_nil(field reference): Returns a database expression to test if the field in the sheet is nil.

db:is_not_nil

db:is_not_nil(field reference): Returns a database expression to test if the field in the sheet is not nil.

db:like

db:like(field reference, pattern): returns a database expression to test if the field in the sheet matches the specified pattern.; LIKE patterns are not case-sensitive, and allow two wild cards. The first is an underscore which matches any single one character. The second is a percent symbol which matches zero or more of any character.; LIKE with "_" is therefore the same as the "." regular expression.; LIKE with "%" is therefore the same as ".*" regular expression.

db:lt

db:lt(field reference, value): Returns a database expression to test if the field in the sheet is less than the value.

db:lte

db:lte(field reference, value): Returns a database expression to test if the field in the sheet is less than or equal to the value.

db:merge_unique

db:merge_unique(sheet reference, table array): Merges the specified table array into the sheet, modifying any existing rows and adding any that don’t exist.; This function is a convenience utility that allows you to quickly modify a sheet, changing existing rows and add new ones as appropriate. It ONLY works on sheets which have a unique index, and only when that unique index is only on a single field. For more complex situations you’ll have to do the logic yourself.; The table array may contain tables that were either returned previously by db:fetch, or new tables that you’ve constructed with the correct fields, or any mix of both. Each table must have a value for the unique key that has been set on this sheet.
For example, consider this database

local mydb = db:create("peopledb",
     {
          friends = {
               name = "",
               race = "",
               level = 0,
               city = "",
               _index = { "city" },
               _unique = { "name" }
          }
);

Here you have a database with one sheet, which contains your friends, their race, level, and what city they live in. Let’s say you want to fetch everyone who lives in San Francisco, you could do:

local results = db:fetch(mydb.friends, db:eq(mydb.friends.city, "San Francisco"))

The tables in results are static, any changes to them are not saved back to the database. But after a major radioactive cataclysm rendered everyone in San Francisco a mutant, you could make changes to the tables as so:

for _, friend in ipairs(results) do
     friend.race = "Mutant"
end

If you are also now aware of a new arrival in San Francisco, you could add them to that existing table array:

results[#results+1] = {name="Bobette", race="Mutant", city="San Francisco"}

And commit all of these changes back to the database at once with:

db:merge_unique(mydb.friends, results)

The db:merge_unique function will change the city values for all the people who we previously fetched, but then add a new record as well.

db:not_between

db:not_between(field reference, lower_bound, upper_bound): Returns a database expression to test if the field in the sheet is not a value between lower_bound and upper_bound. This only really makes sense for numbers and Timestamps.

db:not_eq

db:not_eq(field reference, value): Returns a database expression to test if the field in the sheet is NOT equal to the value.

db:not_in

db:not_in(field reference, table array): Returns a database expression to test if the field in the sheet is not one of the values in the table array.

db:not_like

db:not_like(field reference, pattern): Returns a database expression to test if the field in the sheet does not match the specified pattern.; LIKE patterns are not case-sensitive, and allow two wild cards. The first is an underscore which matches any single one character. The second is a percent symbol which matches zero or more of any character.; LIKE with "_" is therefore the same as the "." regular expression.; LIKE with "%" is therefore the same as ".*" regular expression.

db:OR

db:OR(sub-expression1, sub-expression2): Returns a compound database expression that combines both of the simple expressions passed into it; these expressions should be generated with other db: functions such as db:eq, db:like, db:lt and the like.

This compound expression will find any item that matches either the first or the second sub-expression.

db:query_by_example

db:query_by_example(sheet reference, example table): Returns a query for database content matching the given example, which can be used for db:delete, db:fetch and db:set. Different fields of the example are AND connected.

Field values should be strings and can contain the following values:

literal strings to search for
comparison terms prepended with <, >, >=, <=, !=, <> for number and date comparisons
ranges with :: between lower and upper bound
different single values combined by || as OR
strings containing % for a single and _ for multiple wildcard characters

Available in Mudlet3.0+

Example

mydb = db:create("mydb",
{
  sheet = {
  name = "", id = 0, city = "",
  _index = { "name" },
  _unique = { "id" },
  _violations = "FAIL"
  }
})
test_data = {
  {name="Ixokai", city="Magnagora", id=1},
  {name="Vadi", city="New Celest", id=2},
  {name="Heiko", city="Hallifax", id=3},
  {name="Keneanung", city="Hashan", id=4},
  {name="Carmain", city="Mhaldor", id=5},
  {name="Ixokai", city="Hallifax", id=6},
}
db:add(mydb.sheet, unpack(test_data))
res = db:fetch(mydb.sheet, db:query_by_example(mydb.sheet, { name = "Ixokai"}))
display(res)
--[[
Prints
{
  {
    id = 1,
    name = "Ixokai",
    city = "Magnagora"
  },
  {
    id = 6,
    name = "Ixokai",
    city = "Hallifax"
  }
}
--]]

mydb = db:create("mydb",
  {
    sheet = {
    name = "", id = 0, city = "",
    _index = { "name" },
    _unique = { "id" },
    _violations = "FAIL"
    }
  })
test_data = {
  {name="Ixokai", city="Magnagora", id=1},
  {name="Vadi", city="New Celest", id=2},
  {name="Heiko", city="Hallifax", id=3},
  {name="Keneanung", city="Hashan", id=4},
  {name="Carmain", city="Mhaldor", id=5},
  {name="Ixokai", city="Hallifax", id=6},
}
db:add(mydb.sheet, unpack(test_data))
res = db:fetch(mydb.sheet, db:query_by_example(mydb.sheet, { name = "Ixokai", id = "1"}))
display(res)
--[[
  Prints
  {
    id = 1,
    name = "Ixokai",
    city = "Magnagora"
  }
--]]

db:Timestamp

db:Timestamp(time): Returns a table that will be converted to an appropriate time. If the time argument is a table, it will be converted to the current OS time; if it is a number, it will be intrepreted as a Unix epoch time; if it is nil, it will be converted to a SQL NULL; it can also have the value of "CURRENT_TIMESTAMP", which will be converted to the corresponding SQL keyword.

db:Null

db:Null(): Returns a table that will be interpreted as the NULL SQL keyword.

db:safe_name

db:safe_name(string): Strips all non-alphanumeric characters from the input string.Mainly used to sanitize database names.

db:set

db:set(field reference, value, query): The db:set function allows you to set a certain field to a certain value across an entire sheet. Meaning, you can change all of the last_read fields in the sheet to a certain value, or possibly only the last_read fields which are in a certain city. The query argument can be any value which is appropriate for db:fetch, even nil which will change the value for the specified column for EVERY row in the sheet.; For example, consider a situation in which you are tracking how many times you find a certain type of egg during Easter. You start by setting up your database and adding an Eggs sheet, and then adding a record for each type of egg.

Example

local mydb = db:create("egg database", {eggs = {color = "", last_found = db.Timestamp(false), found = 0}})
        db:add(mydb.eggs,
                {color = "Red"},
                {color = "Blue"},
                {color = "Green"},
                {color = "Yellow"},
                {color = "Black"}
        )

Now, you have three columns. One is a string, one a timestamp (that ends up as nil in the database), and one is a number.

You can then set up a trigger to capture from the game the string, "You pick up a (.*) egg!", and you end up arranging to store the value of that expression in a variable called "myegg".

To increment how many we found, we will do this:

myegg = "Red" -- We will pretend a trigger set this.
        db:set(mydb.eggs.found, db:exp("found + 1"), db:eq(mydb.eggs.color, myegg))
        db:set(mydb.eggs.last_found, db.Timestamp("CURRENT_TIMESTAMP"), db:eq(mydb.eggs.color, myegg))

This will go out and set two fields in the Red egg sheet; the first is the found field, which will increment the value of that field (using the special db:exp function). The second will update the last_found field with the current time.

Once this contest is over, you may wish to reset this data but keep the database around. To do that, you may use a more broad use of db:set as such:

db:set(mydb.eggs.found, 0)
db:set(mydb.eggs.last_found, nil)

db:update

db:update(sheet reference, table): This function updates a row in the specified sheet, but only accepts a row which has been previously obtained by db:fetch. Its primary purpose is that if you do a db:fetch, then change the value of a field or tow, you can save back that table.

Example

local mydb = db:get_database("my database")
local bob = db:fetch(mydb.friends, db:eq(mydb.friends.name, "Bob"))[1]
bob.notes = "He's a really awesome guy."
db:update(mydb.friends, bob)

This obtains a database reference, and queries the friends sheet for someone named Bob. As this returns a table array containing only one item, it assigns that one item to the local variable named bob. We then change the notes on Bob, and pass it into db:update() to save the changes back.

db:_sql_convert

db:_sql_convert(value): Converts a data value in Lua to its SQL equivalent; notably it will also escape single-quotes to prevent inadvertent SQL injection. In addition, it will convert Lua tables with a _timestamp key to the appropriate time (possibly CURRENT_TIMESTAMP) and Lua tables with a _isNull key to the NULL SQL keyword.

db:_sql_values

db:_sql_values(values): This quotes values to be passed into an INSERT or UPDATE operation in a SQL list. Meaning, it turns {x="this", y="that", z=1} into ('this', 'that', 1). It is intelligent with data-types; strings are automatically quoted (with internal single quotes escaped), nil turned into NULL, timestamps converted to integers, and such.

Transaction Functions

These functions facilitate use of transactions with a database. This can safely be ignored in most cases, but can provide useful functionality in specific circumstances. Transactions allow batching sets of changes to be accepted or rejected at a later point. Bear in mind that transactions affect an entire database.

db:_begin

db:_begin(): This function halts all automatic disk writes for the database. This can be especially helpful when running large or frequent (multiple times a second) database edits through multiple function calls to prevent Mudlet freezing or jittering. Calling this on a database already in a transaction will have no effect, but will not produce an error.

local mydb = db:get_database("my_database")
mydb:_begin()
-- do other things as needed

db:_commit

db:_commit(): This function forces the database to save all changes to disk, beginning a new transaction in the process.

local mydb = db:get_database("my_database")
mydb:_begin()
-- do other things as needed
mydb:_commit()

db:_end

db:_end(): This function re-enables automatic disk writes for the database. It will not commit changes to disk on its own, nor will it end the current transaction. Using db:_commit() or any database function that writes changes after this will save the transaction to disk. Using db:_begin again before this happens will continue the previous transaction without writing anything to disk.

local mydb = db:get_database("my_database")
mydb:_end()

db:_rollback

db:_rollback(): This function will discard all changes that have occurred during the current transaction and begin a new one. Use of this function will not toggle the auto-write state of the database.

local mydb = db:get_database("my_database")
mydb:_begin()
-- do other things as needed
mydb:_rollback()

Date & Time Functions

A collection of functions for handling date & time.

datetime:parse

datetime:parse(source, format, as_epoch): Parses the specified source string, according to the format if given, to return a representation of the date/time. If as_epoch is provided and true, the return value will be a Unix epoch — the number of seconds since 1970. This is a useful format for exchanging date/times with other systems. If as_epoch is false, then a Lua time table will be returned. Details of the time tables are provided in the Lua Manual.

Supported Format Codes

%b = Abbreviated Month Name
%B = Full Month Name
%d = Day of Month
%H = Hour (24-hour format)
%I = Hour (12-hour format, requires %p as well)
%p = AM or PM
%m = 2-digit month (01-12)
%M = 2-digit minutes (00-59)
%S = 2-digit seconds (00-59)
%y = 2-digit year (00-99), will automatically prepend 20 so 10 becomes 2010 and not 1910.
%Y = 4-digit year.

getEpoch

seconds = getEpoch(): This function returns the seconds since Unix epoch with milliseconds.

Example

getEpoch() -- will show e.g. 1523555867.191

getTime

time = getTime([return as string, [custom time format]]): "return string" is a boolean value (in Lua anything but false or nil will translate to true). If false, the function will return a table in the following format:

{ 'min': #, 'year': #, 'month': #, 'day': #, 'sec': #, 'hour': #, 'msec': # }

If true, it will return the date and time as a string using a format passed to the "custom time format" arg or if none is supplied the default of "yyyy.MM.dd hh:mm:ss.zzz":

2012.02.18 00:52:52.489

Format expressions:

h               the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display)
hh              the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display)
H               the hour without a leading zero (0 to 23, even with AM/PM display)
HH              the hour with a leading zero (00 to 23, even with AM/PM display)
m               the minute without a leading zero (0 to 59)
mm              the minute with a leading zero (00 to 59)
s               the second without a leading zero (0 to 59)
ss              the second with a leading zero (00 to 59)
z               the milliseconds without leading zeroes (0 to 999)
zzz             the milliseconds with leading zeroes (000 to 999)
AP or A         use AM/PM display. AP will be replaced by either "AM" or "PM".
ap or a         use am/pm display. ap will be replaced by either "am" or "pm".

d               the day as number without a leading zero (1 to 31)
dd              the day as number with a leading zero (01 to 31)
ddd             the abbreviated localized day name (e.g. 'Mon' to 'Sun'). Uses QDate::shortDayName().
dddd            the long localized day name (e.g. 'Monday' to 'Qt::Sunday'). Uses QDate::longDayName().
M               the month as number without a leading zero (1-12)
MM              the month as number with a leading zero (01-12)
MMM             the abbreviated localized month name (e.g. 'Jan' to 'Dec'). Uses QDate::shortMonthName().
MMMM            the long localized month name (e.g. 'January' to 'December'). Uses QDate::longMonthName().
yy              the year as two digit number (00-99)
yyyy            the year as four digit number

All other input characters will be ignored. Any sequence of characters that are enclosed in single quotes will be treated as text and not be used as an expression. Two consecutive single quotes ('') are replaced by a single single quote in the output.

Example

-- Get time as a table
getTime()

-- Get time with default string
getTime(true)

-- Get time without date and milliseconds
getTime(true, "hh:mm:ss")

getTimestamp

time = getTimestamp([console_name], lineNumber): Returns the timestamp string as it’s seen when you enable the timestamps view (blue i button bottom right).

Example

-- echo the timestamp of the current line in a trigger:
echo(getTimestamp(getLineCount()))

-- insert the timestamp into a "chat" miniconsole
cecho("chat", "<red>"..getTimestamp(getLineCount()))

shms

shms(seconds, bool): Converts seconds into hours, minutes and seconds, displaying the result as a table. An optional second argument can be passed to return the result as an echo.

Available in Mudlet3.0+

Example

--Determine the total number of seconds and display:
shms(65535, true)

File System Functions

A collection of functions for interacting with the file system.

Note: Mudlet also includes LuaFileSystem. See their manual for more details.

io.exists

io.exists(path): Checks to see if a given file or folder exists.; If it exists, it’ll return the Lua true boolean value, otherwise false.; See lfs.attributes() for a cross-platform solution.

Example

-- This example works on Linux only
if io.exists("/home/vadi/Desktop") then
  echo("This folder exists!")
else
  echo("This folder doesn't exist.")
end

-- This example will work on both Windows and Linux.
if io.exists("/home/vadi/Desktop/file.tx") then
  echo("This file exists!")
else
  echo("This file doesn't exist.")
end

lfs.attributes

infoTable = lfs.attributes(path): Returns a table with detailed information regarding a file or directory, or nil if path is invalid / file or folder does not exist.

Example

fileInfo = lfs.attributes("/path/to/file_or_directory")
if fileInfo then
    if fileInfo.mode == "directory" then
        echo("Path points to a directory.")
    elseif fileInfo.mode == "file" then
        echo("Path points to a file.")
    else
        echo("Path points to: "..fileInfo.mode)
    end
    display(fileInfo) -- to see the detailed information
else
    echo("The path is invalid (file/directory doesn't exist)")
end

Mapper Functions

These are functions that are to be used with the Mudlet Mapper. The mapper is designed to be generic - it only provides the display and pathway calculations, to be used in Lua scripts that are tailored to the game you're playing. For a collection of pre-made scripts and general mapper talk, visit the mapper section of the forums.

To register a script as a mapping one with Mudlet (so Mudlet knows the profile has one and won't bother the user when they open the map), please do this in your script:

mudlet = mudlet or {}; mudlet.mapper_script = true

addAreaName

areaID = addAreaName(areaName)

Adds a new area name and returns the new (positive) area ID for the new name. If the name already exists, older versions of Mudlet returned -1 though since 3.0 the code will return nil and an error message.

addCustomLine

addCustomLine(roomID, id_to, direction, style, color, arrow): See also: getCustomLines(), removeCustomLine()

Adds a new/replaces an existing custom exit line to the 2D mapper for the room with the Id given.

Parameters

roomID:

Room ID to attach the custom line to.

id_to:

EITHER: a room Id number, of a room on same area who's x and y coordinates are used as the other end of a SINGLE segment custom line (it does NOT imply that is what the exit it represent goes to, just the location of the end of the line);

OR: a table of sets of THREE (x,y and z) coordinates in that order, x and y can be decimals, z is an integer (and must be present and be the same for all points on the line, though it is irrelevant to what is produced as the line is drawn on the same z-coordinate as the room that the line is attached to!)

direction: a string to associate the line with a valid exit direction, "n", "ne", "e", "se", "s", "sw", "w", "nw", "up", "down", "in" or "out" or a special exit (before Mudlet 3.17 this was case-sensitive and cardinal directions had to be uppercase).
style: a string, one of: "solid line", "dot line", "dash line", "dash dot line" or "dash dot dot line" exactly.

how these look can be seen in the Map Legend section of the manual

color: a table of three integers between 0 and 255 as the custom line color as the red, green and blue components in that order.
arrow: a boolean which if true will set the custom line to have an arrow on the end of the last segment.

Available in Mudlet3.0+

Examples

-- create a line from roomid 1 to roomid 2
addCustomLine(1, 2, "N", "dot line", {0, 255, 255}, true)

addCustomLine(1, {{1, 2, 0}, {1, 4, 0}, {0, 5, 0}}, "N", "dash dot dot line", {128, 128, 0}, false)

The second custom exit will look like the below screenshot.

A bigger example that'll create a new area and the room in it:

local areaid = addAreaName("Custom Exit Playground")
local firstRoom = createRoomID()
addRoom(firstRoom, areaid)
setRoomCoordinates(firstRoom, 0, 0, 0)

local secondRoom = createRoomID()
addRoom(secondRoom, areaid)
setRoomCoordinates(secondRoom, 0, 5, 0)

-- make a special exit for this room, and a custom exit line
addSpecialExit(firstRoom, secondRoom, "climb Rope")
addCustomLine(firstRoom, {{1, 2, 0}, {1, 4, 0}, {0, 5, 0}}, "climb Rope", "dash dot dot line", {128, 128, 0}, false)

centerview(firstRoom)

This should result in a map with a custom exit looking something like the following.

addMapEvent

addMapEvent(uniquename, event name, parent, display name, arguments)

Adds a new entry to an existing mapper right-click entry. You can add one with addMapMenu. If there is no display name, it will default to the unique name (which otherwise isn't shown and is just used to differentiate this entry from others). event name is the Mudlet event that will be called when this is clicked on, and arguments will be passed to the handler function.

Example

addMapEvent("room a", "onFavorite") -- will make a label "room a" on the map menu's right click that calls onFavorite

addMapEvent("room b", "onFavorite", "Favorites", "Special Room!", 12345, "arg1", "arg2", "argn")

The last line will make a label "Special Room!" under the "Favorites" menu that upon clicking will raise an event with all the arguments.

addMapMenu("Room type")
addMapEvent("markRoomsAsDeathTrap", "onMapMarkSelectedRooms", "Room type", "Mark selected rooms as Death Trap")
addMapEvent("markRoomsAsOneRoom", "onMapMarkSelectedRooms", "Room type", "Mark selected rooms as single-pass")

function onMapMarkSelectedRooms(event, markRoomType)
  local selectedRooms = getMapSelection()["rooms"]
  for i, val in ipairs(selectedRooms) do
    if markRoomType == "markRoomsAsDeathTrap" then
      local r, g, b = unpack(color_table.black)
      --death trap
      setRoomEnv(val, 300)
      --death traps Env
      setCustomEnvColor(300, r, g, b, 255)
      setRoomChar(val, "☠️")
      lockRoom(val, true)
    elseif markRoomType == "markRoomsAsOneRoom" then
      local r, g, b = unpack(color_table.LightCoral)
      --single-pass
      setRoomEnv(val, 301)
      --one room Env
      setCustomEnvColor(301, r, g, b, 255)
      setRoomChar(val, "🚹")
    end
  end
  updateMap()
end

registerAnonymousEventHandler("onMapMarkSelectedRooms", "onMapMarkSelectedRooms")

This create menu and two submenu options: "Mark selected rooms as Death Trap" and "Mark selected rooms as single-pass"

addMapMenu

addMapMenu(uniquename, parent, display name)

Adds a new submenu to the right-click menu that opens when you right-click on the mapper. You can then add more submenus to it, or add entries with addMapEvent().

Example

-- This will create a menu named: Favorites.
addMapMenu("Favorites")

-- This will create a submenu with the unique id 'Favorites123' under 'Favorites' with the display name of 'More Favorites'.
addMapMenu("Favorites1234343", "Favorites", "More Favorites")

addRoom

addRoom(roomID)

Creates a new room with the given ID, returns true if the room was successfully created.

Note: If you're not using incremental room IDs but room IDs stitched together from other factors or in-game hashes for room IDs - and your room IDs are starting off at 250+million numbers, you need to look into incrementally creating Mudlets room IDs with createRoomID() and associating your room IDs with Mudlets via setRoomIDbyHash() and getRoomIDbyHash(). The reason being is that Mudlet's A* pathfinding implementation from boost cannot deal with extremely large room IDs because the resulting matrices it creates for pathfinding are enormously huge. Note: Creating your own mapping script? Check out more information here.

addSpecialExit

addSpecialExit(roomIDFrom, roomIDTo, moveCommand)

Creates a one-way from one room to another, that will use the given command for going through them.

Example

-- add a one-way special exit going from room 1 to room 2 using the 'pull rope' command
addSpecialExit(1, 2, "pull rope")

Example in an alias:

-- sample alias pattern: ^spe (\d+) (.*?)$
-- currentroom is your current room ID in this example
addSpecialExit(currentroom,tonumber(matches[2]), matches[3])
echo("\n SPECIAL EXIT ADDED TO ROOMID:"..matches[2]..", Command:"..matches[3])
centerview(currentroom)

auditAreas

auditAreas()

Initiates a consistency check on the whole map: All rooms, areas, and their composition. This is also done automatically whenever you first open your map, so probably seldom necessary to do manually. Will output findings to screen and/or logfile for later review.

centerview

centerview (roomID)

Centers the map view onto the given room ID. The map must be open to see this take effect. This function can also be used to see the map of an area if you know the number of a room there and the area and room are mapped.

clearAreaUserData

clearAreaUserData(areaID)

Parameter

areaID - ID number for area to clear.

Clears all user data from a given area. Note that this will not touch the room user data.

Example

display(clearAreaUserData(34))
-- I did have data in that area, so it returns:
true

display(clearAreaUserData(34))
-- There is no data NOW, so it returns:
false

Available in Mudlet3.0+

clearAreaUserDataItem

clearAreaUserDataItem(areaID, key)

Removes the specific key and value from the user data from a given area.

Available in Mudlet3.0+

Example

display(getAllAreaUserData(34))
{
  description = [[<area description here>]],
  ruler = "Queen Morgase Trakand"
}

display(clearAreaUserDataItem(34,"ruler"))
true

display(getAllAreaUserData(34))
{
  description = [[<area description here>]],
}

display(clearAreaUserDataItem(34,"ruler"))
false

clearMapSelection

clearMapSelection()

Clears any selected rooms from the map (i.e. they are highlighted in orange).

Returns true if rooms are successfully cleared, false if nothing selected or cleared.

clearMapUserData

clearMapUserData()

Clears all user data stored for the map itself. Note that this will not touch the area or room user data.

Available in Mudlet3.0+

Example

display(clearMapUserData())
-- I did have user data stored for the map, so it returns:
true

display(clearMapUserData())
-- There is no data NOW, so it returns:
false

clearMapUserDataItem

clearMapUserDataItem(mapID, key)

Removes the specific key and value from the user data from the map user data.

Example

display(getAllMapUserData())
{
  description = [[<map description here>]],
  last_modified = "1483228799"
}

display(clearMapUserDataItem("last_modified"))
true

display(getAllMapUserData())
{
  description = [[<map description here>]],
}

display(clearMapUserDataItem("last_modified"))
false

Available in Mudlet3.0+

clearRoomUserData

clearRoomUserData(roomID)

Clears all user data from a given room.

Note: Returns a boolean true if any data was removed from the specified room and false if there was nothing to erase since Mudlet 3.0.

Example

display(clearRoomUserData(3441))
-- I did have data in that room, so it returns:
true

display(clearRoomUserData(3441))
-- There is no data NOW, so it returns:
false

clearRoomUserDataItem

clearRoomUserDataItem(roomID, key)

Removes the specific key and value from the user data from a given room.

Returns a boolean true if data was found against the give key in the user data for the given room and it is removed, will return false if exact key not present in the data. Returns nil if the room for the roomID not found.

Example

display(getAllRoomUserData(3441))
{
  description = [[
From this ledge you can see out across a large cavern to the southwest. The
east side of the cavern is full of stalactites and stalagmites and other
weird rock formations. The west side has a path through it and an exit to the
south. The sound of falling water pervades the cavern seeming to come from
every side. There is a small tunnel to your east and a stalactite within arms
reach to the south. It appears to have grown till it connects with the
stalagmite below it. Something smells... Yuck you are standing in bat guano!]],
  doorname_up = "trapdoor"
}

display(clearRoomUserDataItem(3441,"doorname_up"))
true

display(getAllRoomUserData(3441))
{
  description = [[
From this ledge you can see out across a large cavern to the southwest. The
east side of the cavern is full of stalactites and stalagmites and other
weird rock formations. The west side has a path through it and an exit to the
south. The sound of falling water pervades the cavern seeming to come from
every side. There is a small tunnel to your east and a stalactite within arms
reach to the south. It appears to have grown till it connects with the
stalagmite below it. Something smells... Yuck you are standing in bat guano!]],
}

display(clearRoomUserDataItem(3441,"doorname_up"))
false

Available in Mudlet3.0+

clearSpecialExits

clearSpecialExits(roomID)

Removes all special exits from a room.

Example

clearSpecialExits(1337)

if #getSpecialExits(1337) == 0 then -- clearSpecialExits will never fail on a valid room ID, this is an example
  echo("All special exits successfully cleared from 1337.\n")
end

closeMapWidget

closeMapWidget(): closes (hides) the map window (similar to clicking on the map icon)

Available in Mudlet4.7+

connectExitStub

connectExitStub(fromID, direction) or connectExitStub(fromID, toID, [direction])

Connects existing rooms with matching exit stubs. If you only give it a roomID and a direction, it'll work out which room should be linked to it that has an appropriate opposite exit stub and is located in the right direction. You can also just specify from and to room IDs, and it'll smartly use the right direction to link in. Lastly, you can specify all three arguments - fromID, toID and the direction (in that order) if you'd like to be explicit, or use setExit() for the same effect.

Parameters

fromID:

Room ID to set the exit stub in.

direction:

You can either specify the direction to link the room in, and/or a specific room ID (see below). Direction can be specified as a number, short direction name ("nw") or long direction name ("northwest").

toID:

The room ID to link this room to. If you don't specify it, the mapper will work out which room should be logically linked.

createMapLabel

labelID = createMapLabel(areaID, text, posX, posY, posZ, fgRed, fgGreen, fgBlue, bgRed, bgGreen, bgBlue[, zoom, fontSize, showOnTop, noScaling, fontName, foregroundTransparency, backgroundTransparency, temporary])

Creates a text label on the map at given coordinates, with the given background and foreground colors. It can go above or below the rooms, scale with zoom or stay a static size. From Mudlet 4.17.0 an additional parameter (assumed to be false if not given from then) makes the label NOT be saved in the map file which, if the image can be regenerated on future loading from a script can reduce the size of the saved map somewhat. It returns a label ID that you can use later for deleting it.

The coordinates 0,0 are in the middle of the map, and are in sync with the room coordinates - so using the x,y values of getRoomCoordinates() will place the label near that room.

Historical Version Note

Note: Some changes were done prior to 4.13 (which exactly? function existed before!) - see corresponding PR and update here!

Parameters

areaID:

Area ID where to put the label.

text:

The text to put into the label. To get a multiline text label add a '\n' between the lines.

posX, posY, posZ:

Position of the label in (floating point numbers) room coordinates.

fgRed, fgGreen, fgBlue:

Foreground color or text color of the label.

bgRed, bgGreen, bgBlue:

Background color of the label.

zoom:

(optional) Zoom factor of the label if noScaling is false. Higher zoom will give higher resolution of the text and smaller size of the label. Default is 30.0.

fontSize:

(optional, but needed if zoom is provided) Size of the font of the text. Default is 50.

showOnTop:

(optional) If true the label will be drawn on top of the rooms and if it is false the label will be drawn as a background, defaults to true if not given.

noScaling:

(optional) If true the label will have the same size when you zoom in and out in the mapper, If it is false the label will scale when you zoom the mapper, defaults to true if not given.

fontName:

(optional) font name to use.

foregroundTransparency

(optional) transparency of the text on the label, defaults to 255 (in range of 0 to 255) or fully opaque if not given.

backgroundTransparency

(optional) transparency of the label background itself, defaults to 50 (in range of 0 to 255) or significantly transparent if not given.

temporary

(optional, from Mudlet version 4.17.0) if true does not save the image that the label makes in map save files, defaults to false if not given, or for prior versions of Mudlet.

Example

-- the first 50 is some area id, the next three 0,0,0 are coordinates - middle of the area
-- 255,0,0 would be the foreground in RGB, 23,0,0 would be the background RGB
-- zoom is only relevant when when you're using a label of a static size, so we use 0
-- and we use a font size of 20 for our label, which is a small medium compared to the map
local labelid = createMapLabel( 50, "my map label", 0,0,0, 255,0,0, 23,0,0, 0,20)

-- to create a multi line text label we add '\n' between lines
-- the position is placed somewhat to the northeast of the center of the map
-- this label will be scaled as you zoom the map.
local labelid = createMapLabel( 50, "1. Row One\n2. Row 2", .5,5.5,0, 255,0,0, 23,0,0, 30,50, true, false)

local x,y,z = getRoomCoordinates(getPlayerRoom())
createMapLabel(getRoomArea(getPlayerRoom()), "my map label", x,y,z, 255,0,0, 23,0,0, 0,20, false, true, "Ubuntu", 255, 100)

createMapImageLabel

labelID = createMapImageLabel(areaID, filePath, posx, posy, posz, width, height, zoom, showOnTop[, temporary])

Creates an image label on the map at the given coordinates, with the given dimensions and zoom. You might find the default room and image size correlation to be too big - try reducing the width and height of the image then, while also zooming in the same amount. From Mudlet 4.17.0 an additional parameter (assumed to be false if not given from then) makes the label NOT be saved in the map file which, if the image can be regenerated on future loading from a external file available when the map file is loaded, can avoid expanding the size of the saved map considerably.

The coordinates 0,0 are in the middle of the map, and are in sync with the room coordinates - so using the x,y values of getRoomCoordinates() will place the label near that room.

Example

-- 138 is our pretend area ID
-- next, inside [[]]'s, is the exact location of our image
-- 0,0,0 are the x,y,z coordinates - so this will place it in the middle of the map
-- 482 is the width of the image - we divide it by 100 to scale it down, and then we'll zoom it by 100 - making the image take up about 4 rooms in width then
-- 555 is the original height of the image
-- 100 is how much we zoom it by, 1 would be no zoom
-- false to make it go below our rooms
-- (from 4.17.0) true to not save the label's image in the map file afterwards
createMapImageLabel(138, [[/home/vadi/Pictures/You only see what shown.png]], 0,0,0, 482/100, 555/100, 100, false, true)

createMapper

createMapper([name of userwindow], x, y, width, height)

Creates a miniconsole window for the mapper to render in, the with the given dimensions. You can only create one mapper at a time, and it is not currently possible to have a label on or under the mapper - otherwise, clicks won't register.

Note: name of userwindow available in Mudlet 4.6.1+

Note: If this command is not used then clicking on the Main Toolbar's Map button will create a dock-able widget (that can be floated free to anywhere on the Desktop, it can be resized and does not have to even reside on the same monitor should there be multiple screens in your system). Further clicks on the Map button will toggle between showing and hiding the map whether it was created using the createMapper function or as a dock-able widget.

Example

createMapper(0,0,300,300) -- creates a 300x300 mapper in the top-left corner of Mudlet
setBorderLeft(305) -- adds a border so text doesn't underlap the mapper display

-- another example:
local main = Geyser.Container:new({x=0,y=0,width="100%",height="100%",name="mapper container"})
 
local mapper = Geyser.Mapper:new({
  name = "mapper",
  x = "70%", y = 0, -- edit here if you want to move it
  width = "30%", height = "50%"
}, main)

createRoomID

usableId = createRoomID([minimumStartingRoomId])

Returns the lowest possible room ID you can use for creating a new room. If there are gaps in room IDs your map uses it, this function will go through the gaps first before creating higher IDs.

Parameters

minimumStartingRoomId (optional, available in Mudlet 3.0+):

If provided, specifies a roomID to start searching for an empty one at, instead of 1. Useful if you'd like to ensure certain areas have specific room number ranges, for example. If you you're working with a huge map, provide the last used room ID to this function for an available roomID to be found a lot quicker.

deleteArea

deleteArea(areaID or areaName)

Deletes the given area and all rooms in it. Returns true on success or nil + error message otherwise.

deleteMap

deleteMap()

Deletes the entire map. This may be useful whilst initially setting up a mapper package for a new Game to clear faulty map data generated up to this point.

deleteMapLabel

deleteMapLabel(areaID, labelID)

Deletes a map label from a specific area.

deleteRoom

deleteRoom(roomID)

Deletes an individual room, and unlinks all exits leading to and from it.

Example

deleteRoom(335)

disableMapInfo

disableMapInfo(label)

Disable the particular map info - same as toggling off checkbox from select box under mapper.

Parameters

label:

Name under which map info to be disabled was registered.

Available in Mudlet4.11+

enableMapInfo

enableMapInfo(label)

Enable the particular map info - same as toggling on checkbox from select box under mapper.

Parameters

label:

Name under which map info to be enabled was registered.

Available in Mudlet4.11+

getAllAreaUserData

dataTable = getAllAreaUserData(areaID)

Returns all the user data items stored in the given area ID; will return an empty table if there is no data stored or nil if there is no such area with that ID.

Example

display(getAllAreaUserData(34))
--might result in:--
{
  country = "Andor",
  ruler = "Queen Morgase Trakand"
}

Available in Mudlet3.0+

getAllMapUserData

dataTable = getAllMapUserData()

Returns all the user data items stored at the map level; will return an empty table if there is no data stored.

getAllRoomEntrances

exitsTable = getAllRoomEntrances(roomID)

Returns an indexed list of normal and special exits leading into this room. In case of two-way exits, this'll report exactly the same rooms as getRoomExits(), but this function has the ability to pick up one-way exits coming into the room as well.

Available in Mudlet3.0+

Example

-- print the list of rooms that have exits leading into room 512
for _, roomid in ipairs(getAllRoomEntrances(512)) do 
  print(roomid)
end

getAllRoomUserData

dataTable = getAllRoomUserData(roomID)

Returns all the user data items stored in the given room ID; will return an empty table if there is no data stored or nil if there is no such room with that ID. Can be useful if the user was not the one who put the data in the map in the first place!

See also: getRoomUserDataKeys() - for a related command that only returns the data keys.

Available in Mudlet3.0+

Example

display(getAllRoomUserData(3441))
--might result in:--
{
  description = [[
From this ledge you can see out across a large cavern to the southwest. The
east side of the cavern is full of stalactites and stalagmites and other
weird rock formations. The west side has a path through it and an exit to the
south. The sound of falling water pervades the cavern seeming to come from
every side. There is a small tunnel to your east and a stalactite within arms
reach to the south. It appears to have grown till it connects with the
stalagmite below it. Something smells... Yuck you are standing in bat guano!]],
  doorname_up = "trapdoor"
}

getAreaExits

roomTable = getAreaExits(areaID, showExits)

Returns a table (indexed or key-value) of the rooms in the given area that have exits leading out to other areas - that is, border rooms.

See also: setExit(), getRoomExits()

Parameters

areaID:

Area ID to list the exits for.

showExits:

Boolean argument, if true then the exits that lead out to another area will be listed for each room.

Example

-- list all border rooms for area 44:
getAreaExits(44)

-- returns:
--[[
{
  7091,
  10659,
  11112,
  11122,
  11133,
  11400,
  12483,
  24012
}
]]

-- list all border rooms for area 44, and the exits within them that go out to other areas:
getAreaExits(44, true)
--[[
{
  [12483] = {
    north = 27278
  },
  [11122] = {
    ["enter grate"] = 14551
  },
  [11112] = {
    ["enter grate"] = 14829
  },
  [24012] = {
    north = 22413
  },
  [11400] = {
    south = 10577
  },
  [11133] = {
    ["enter grate"] = 15610
  },
  [7091] = {
    down = 4411
  },
  [10659] = {
    ["enter grate"] = 15510
  }
}
]]

getAreaRooms

getAreaRooms(area id)

Returns an indexed table with all rooms IDs for a given area ID (room IDs are values), or nil if no such area exists. Indexing starts at 0.

Example

-- using the sample findAreaID() function defined in the getAreaTable() example, 
-- we'll define a function that echo's us a nice list of all rooms in an area with their ID
function echoRoomList(areaname)
  local id, msg = findAreaID(areaname)
  if id then
    local roomlist, endresult = getAreaRooms(id), {}
  
    -- obtain a room list for each of the room IDs we got
    for _, id in pairs(roomlist) do
      endresult[id] = getRoomName(id)
    end
  
    -- now display something half-decent looking
    cecho(string.format(
      "List of all rooms in %s (%d):\n", msg, table.size(endresult)))

    for roomid, roomname in pairs(endresult) do
      cecho(string.format(
        "%6s: %s\n", roomid, roomname))
    end
  elseif not id and msg then
    echo("ID not found; " .. msg)
  else
    echo("No areas matched the query.")
  end
end

getAreaTable

areaTable = getAreaTable()

Returns a key(area name)-value(area id) table with all known areas and their IDs.

Historical Version Note

Note: Some older versions of Mudlet return an area with an empty name and an ID of 0 included in it, you should ignore that.

See also: getAreaTableSwap()

Example

-- example function that returns the area ID for a given area

function findAreaID(areaname)
  local list = getAreaTable()

  -- iterate over the list of areas, matching them with substring match. 
  -- if we get match a single area, then return it's ID, otherwise return
  -- 'false' and a message that there are than one are matches
  local returnid, fullareaname
  for area, id in pairs(list) do
    if area:find(areaname, 1, true) then
      if returnid then return false, "more than one area matches" end
      returnid = id; fullareaname = area
    end
  end
  
  return returnid, fullareaname
end

-- sample use:
local id, msg = findAreaID("blahblah")
if id then
  echo("Found a matching ID: " .. id)
elseif not id and msg then
  echo("ID not found: " .. msg)
else
  echo("No areas matched the query.")
end

getAreaTableSwap

areaTable = getAreaTableSwap()

Returns a key(area id)-value(area name) table with all known areas and their IDs. Unlike getAreaTable which won't show you all areas with the same name by different IDs, this function will.

Historical Version Note

Note: Some older versions of Mudlet return an area with an empty name and an ID of 0 included in it, you should ignore that.

getAreaUserData

dataValue = getAreaUserData(areaID, key)

Returns a specific data item stored against the given key for the given area ID number. This is very like the corresponding Room User Data command but intended for per area rather than for per room data (for storage of data relating to the whole map see the corresponding Map User Data commands.)

Returns the user data value (string) stored at a given room with a given key (string), or a Lua nil and an error message if the key is not present in the Area User Data for the given Area ID. Use setAreaUserData() function for storing the user data.

See also: clearAreaUserData(), clearAreaUserDataItem(), getAllAreaUserData(), searchAreaUserData(), setAreaUserData()

Example

display(getAreaUserData(34, "country"))
-- might produce --
"Andor"

getCustomEnvColorTable

envcolors = getCustomEnvColorTable()

Returns a table with customized environments, where the key is the environment ID and the value is a indexed table of rgb values.

getCustomLines

lineTable = getCustomLines(roomID): See also: addCustomLine(), removeCustomLine()

Returns a table including all the details of the custom exit lines, if any, for the room with the id given.

Parameters

roomID:

Room ID to return the custom line details of.

Available in Mudlet3.0.+

Example

display getCustomLines(1)
{
  ["climb Rope"] = {
    attributes = {
      color = {
        b = 0,
        g = 128,
        r = 128
      },
      style = "dash dot dot line",
      arrow = false
    },
    points = {
      {
        y = 9.5,
        x = 4.5
      },
      {
        y = 9.5,
        x = 6
      },
      [0] = {
        y = 5.5,
        x = 4.5
      }
    }
  },
  N = {
    attributes = {
      color = {
        b = 255,
        g = 255,
        r = 0
      },
      style = "dot line",
      arrow = true
    },
    points = {
      [0] = {
        y = 27,
        x = -3
      }
    }
  }
}

getCustomLines1

lineTable = getCustomLines1(roomID)

This is a replacement for getCustomLines(...) that outputs the tables for the coordinates for the points on the custom line in an order and format that can be fed straight back into an addCustomLine(...) call; similarly the color parameters are also reported in the correct format to also be reused in the same manner. This function is intended to make it simpler for scripts to manipulate such lines.

Available in Mudlet 4.16+

Parameters

roomID:

Room ID to return the custom line details of.

Returns: a table including all the details of the custom exit lines, if any, for the room with the id given.

Example

display getCustomLines1(1)
{
  ["climb Rope"] = {
    attributes = {
      color = { 128, 128, 0 },
      style = "dash dot dot line",
      arrow = false
    },
    points = { { 4.5, 5.5, 3 }, { 4.5, 9.5, 3 }, { 6, 9.5, 3 } } 
  },
  N = {
    attributes = {
      color = { 0, 255, 255 },
      style = "dot line",
      arrow = true
    },
    points = { { -3, 27, 3 } }
  }
}

getDoors

doors = getDoors(roomID)

Returns a key-value table with the cardinal direction as the key and the door value as a number. If there are no doors in a room, it returns an empty table.

Parameters

roomID:

Room ID to check for doors in.

getExitStubs

stubs = getExitStubs(roomid)

Returns an indexed table (starting at 0) of the direction #'s that have an exit stub marked in them. You can use this information to connect earlier-made exit stubs between rooms when mapping. Returns nil plus error message of called on a non-existent room.

The directions numbers can be deciphered using this table;

  local stubmap = {
      [1] = "north",  [2] = "northeast",  [3] = "northwest",  [4] = "east",
      [5] = "west",   [6] = "south",      [7] = "southeast",  [8] = "southwest",
      [9] = "up",     [10] = "down",      [11] = "in",        [12] = "out",
      [13] = "northup", [14] = "southdown", [15] = "southup", [16] = "northdown",
      [17] = "eastup", [18] = "westdown", [19] = "westup",    [20] = "eastdown"
  }

Example

-- show the exit stubs in room 6 as numbers
local stubs = getExitStubs(6)
for i = 0, #stubs do print(stubs[i]) end

Historical Version Note

Note: Previously would throw a lua error on non-existent room - now returns nil plus error message (as does other run-time errors) - previously would return just a nil on NO exit stubs but now returns a notification error message as well, to aide disambiguation of the nil value.

getExitStubs1

stubs = getExitStubs1(roomid)

Returns an indexed table (starting at 1) of the direction #'s that have an exit stub marked in them. You can use this information to connect earlier-made exit stubs between rooms when mapping. As this function starts indexing from 1 as it is default in Lua, you can use ipairs() to iterate over the results.

See also: getExitStubs()

Example

-- show the exit stubs in room 6 as numbers
for k,v in ipairs(getExitStubs1(6)) do print(k,v) end

getExitWeights

weights = getExitWeights(roomid)

Returns a key-value table of the exit weights that a room has, with the direction or special exit as a key and the value as the exit weight. If a weight for a direction wasn't yet set, it won't be listed.

Parameters

roomid:

Room ID to view the exit weights in.

getGridMode

TrueOrFalse = getGridMode(areaID)

Use this to see, if a specific area has grid/wilderness view mode set. This way, you can also calculate from a script, how many grid areas a map has got in total.

Available in Mudlet3.11+

Parameters

areaID:

Area ID (number) to view the grid mode of.

getMapEvents

mapevents = getMapEvents()

Returns a list of map events currently registered. Each event is a dictionary with the keys uniquename, parent, event name, display name, and arguments, which correspond to the arguments of addMapEvent().

Example

addMapEvent("room a", "onFavorite") -- will make a label "room a" on the map menu's right click that calls onFavorite

addMapEvent("room b", "onFavorite", "Favorites", "Special Room!", 12345, "arg1", "arg2", "argn")

local mapEvents = getMapEvents()
for _, event in ipairs(mapEvents) do
  echo(string.format("MapEvent '%s' is bound to event '%s' with these args: '%s'", event["uniquename"], event["event name"], table.concat(event["arguments"], ",")))
end

Available in Mudlet3.3+

getMapLabel

labelinfo = getMapLabel(areaID, labelID or labelText)

Returns a key-value table describing that particular label in an area. Keys it contains are the X, Y, Z coordinates, Height and Width, BgColor, FgColor, Pixmap, and the Text it contains. If the label is an image label, then Text will be set to the no text string.

BgColor and FgColor are tables with r,g,b keys, each holding 0-255 color component value.

Pixmap is base64 encoded image of label.

Note: BgColor, FgColor, Pixmap are available in Mudlet 4.11+

Parameters

areaID: areaID from which to retrieve label
labelID: labelID (getMapLabels return table key) or labelText (exact match)

Example

lua getMapLabels(52)
{
  "no text",
  [0] = "test"
}

lua getMapLabel(52, 0)
{
  Y = -2,
  X = -8,
  Z = 11,
  Height = 3.9669418334961,
  Text = "test",
  Width = 8.6776866912842,
  BgColor = {
    b = 0,
    g = 0,
    r = 0
  },
  FgColor = {
    b = 50,
    g = 255,
    r = 255
  },
  Pixmap = "iVBORw0KG(...)lFTkSuQmCC" -- base64 encoded png image (shortened for brevity)
}

lua getMapLabel(52, "no text")
{
  Y = 8,
  X = -15,
  Z = 11,
  Height = 7.2520666122437,
  Text = "no text"
  Width = 11.21900844574,
  BgColor = {
    b = 0,
    g = 0,
    r = 0
  },
  FgColor = {
    b = 50,
    g = 255,
    r = 255
  },
  Pixmap = "iVBORw0KG(...)lFTkSuQmCC" -- base64 encoded png image (shortened for brevity)
}

getMapLabels

arealabels = getMapLabels(areaID)

Returns an indexed table (that starts indexing from 0) of all of the labels in the area, plus their label text. You can use the label id to deleteMapLabel() it.

If there are no labels in the area at all, it will return an empty table.

Example

display(getMapLabels(43))
table {
  0: ''
  1: 'Waterways'
}

deleteMapLabel(43, 0)
display(getMapLabels(43))
table {
  1: 'Waterways'
}

getMapMenus

getMapMenus()

Returns a table with the available map menus as key-value in the format of map menu - parent item. If an item is positioned at the menu's top-level, the value will say top-level.

If you haven't opened a map yet, getMapMenus() will return nil+error message. If you don't have any map labels yet, an empty table {} is returned.

getMapSelection

getMapSelection()

Returns a table containing details of the current mouse selection in the 2D mapper.

Reports on one or more rooms being selected (i.e. they are highlighted in orange).

The contents of the table will vary depending on what is currently selected. If the selection is of map rooms then there will be keys of center and rooms: the former will indicates the center room (the one with the yellow cross-hairs) if there is more than one room selected or the only room if there is only one selected (there will not be cross-hairs in that case); the latter will contain a list of the one or more rooms.

Example - several rooms selected

display(getMapSelection())
{
  center = 5013,
  rooms = {
    5011,
    5012,
    5013,
    5014,
    5018,
    5019,
    5020
  }
}

Example - one room selected

display(getMapSelection())
{
  center = 5013,
  rooms = {
    5013
  }
}

Example - no or something other than a room selected

display(getMapSelection())
{
}

Available in Mudlet3.17+

getMapUserData

getMapUserData( key )

Parameters

key:

string used as a key to select the data stored in the map as a whole.

Returns the user data item (string); will return a nil+error message if there is no data with such a key in the map data.

Example

display(getMapUserData("last updated"))
--might result in:--
"December 5, 2020"

Available in Mudlet3.0+

getMapZoom

getMapZoom([areaID])

Gets the current 2D map zoom level. Added in Mudlet 4.17.0 also with the option to get the zoom for an area to be specified even if it is not the one currently being viewed. This change is combined with Mudlet remembering the zoom level last used for each area and with the revision of the setMapZoom() function to also take an areaID to work on instead of the current area being viewed in the map.

getPath

getPath(roomID from, roomID to)

Returns a boolean true/false if a path between two room IDs is possible. If it is, the global speedWalkDir table is set to all of the directions that have to be taken to get there, and the global speedWalkPath table is set to all of the roomIDs you'll encounter on the way, and as of 3.0, speedWalkWeight will return all of the room weights. Additionally returns the total cost (all weights added up) of the path after the boolean argument in 3.0.

getPlayerRoom

getPlayerRoom()

Returns the current player location as set by centerview().

getRoomArea

getRoomArea(roomID)

Returns the area ID of a given room ID. To get the area name, you can check the area ID against the data given by getAreaTable() function, or use the getRoomAreaName() function.

Note: If the room ID does not exist, this function will raise an error.

Example

display("Area ID of room #100 is: "..getRoomArea(100))

display("Area name for room #100 is: "..getRoomAreaName(getRoomArea(100)))

getRoomAreaName

getRoomAreaName(areaID or areaName)

Returns the area name for a given area id; or the area id for a given area name.

Note: Despite the name, this function will not return the area name for a given room id (or room name) directly. However, renaming or revising it would break existing scripts.

Example

echo(string.format("room id #455 is in %s.", getRoomAreaName(getRoomArea(455))))

getRoomChar

getRoomChar(roomID)

Returns the single ASCII character that forms the symbol for the given room id.

Since Mudlet version 3.8 : this facility has been extended:

Returns the string (UTF-8) that forms the symbol for the given room id; this may have been set with either setRoomChar() or with the symbol (was letter in prior versions) context menu item for rooms in the 2D Map.

getRoomCharColor

r,g,b = getRoomCharColor(roomID)

Returns the color of the Room Character as a set of r,g,b color coordinates.

See also: setRoomCharColor(), getRoomChar()

Parameters

roomID:

The room ID to get the room character color from

Returns

The color as 3 separate numbers, red, green, and blue from 0-255

Example

-- gets the color of the room character set on room 12345. If no room character is set the default 'color' is 0,0,0
local r,g,b = getRoomCharColor(12345)
decho(f"Room Character for room 12345 is <{r},{g},{b}>this color.<r> It is made up of <{r},0,0>{r} red<r>, <0,{g},0>{g} green<r>, <0,0,{b}> {b} blue<r>.\")

getRoomCoordinates

x,y,z = getRoomCoordinates(roomID)

Returns the room coordinates of the given room ID.

See also: setRoomCoordinates()

Example

local x,y,z = getRoomCoordinates(roomID)
echo("Room Coordinates for "..roomID..":")
echo("\n     X:"..x)
echo("\n     Y:"..y)
echo("\n     Z:"..z)

-- A quick function that will find all rooms on the same z-position in an area; this is useful if, say, you want to know what all the same rooms on the same "level" of an area is.
function sortByZ(areaID, zval)
  local area = getAreaRooms(areaID)
  local t = {}
  for _, id in ipairs(area) do
    local _, _, z = getRoomCoordinates(id)
    if z == zval then
      table.insert(t, id)
    end
  end
  return t
end

getRoomEnv

envID = getRoomEnv(roomID)

Returns the environment ID of a room. The mapper does not store environment names, so you'd need to keep track of which ID is what name yourself.

Example

function checkID(id)
  echo(string.format("The env ID of room #%d is %d.\n", id, getRoomEnv(id)))
end

getRoomExits

getRoomExits (roomID): Returns the currently known non-special exits for a room in an key-index form: exit = exitroomid.

getRoomHashByID

getRoomHashByID(roomID)

Returns a room hash that is associated with a given room ID in the mapper. This is primarily for games that make use of hashes instead of room IDs. It may be used to share map data while not sharing map itself. nil is returned if no room is not found.

getRoomIDbyHash

roomID = getRoomIDbyHash(hash)

Returns a room ID that is associated with a given hash in the mapper. This is primarily for games that make use of hashes instead of room IDs (like Avalon.de). -1 is returned if no room ID matches the hash.

getRoomName

getRoomName(roomID)

Returns the room name for a given room id.

Example

echo(string.format("The name of the room id #455 is %s.", getRoomName(455))

getRooms

rooms = getRooms()

Returns the list of all rooms in the map in the whole map in roomid - room name format.

Example

-- simple, raw viewer for rooms in the world
display(getRooms())

-- iterate over all rooms in code
for id,name in pairs(getRooms()) do
  print(id, name)
end

getRoomsByPosition

roomTable = getRoomsByPosition(areaID, x,y,z)

Returns an indexed table of all rooms at the given coordinates in the given area, or an empty one if there are none. This function can be useful for checking if a room exists at certain coordinates, or whenever you have rooms overlapping.

Note: The returned table starts indexing from 0 and not the usual lua index of 1, which means that using # to count the size of the returned table will produce erroneous results - use table.size() instead.

Example

-- sample alias to determine a room nearby, given a relative direction from the current room

local otherroom
if matches[2] == "" then
  local w = matches[3]
  local ox, oy, oz, x,y,z = getRoomCoordinates(mmp.currentroom)
  local has = table.contains
  if has({"west", "left", "w", "l"}, w) then
    x = (x or ox) - 1; y = (y or oy); z = (z or oz)
  elseif has({"east", "right", "e", "r"}, w) then
    x = (x or ox) + 1; y = (y or oy); z = (z or oz)
  elseif has({"north", "top", "n", "t"}, w) then
    x = (x or ox); y = (y or oy) + 1; z = (z or oz)
  elseif has({"south", "bottom", "s", "b"}, w) then
    x = (x or ox); y = (y or oy) - 1; z = (z or oz)
  elseif has({"northwest", "topleft", "nw", "tl"}, w) then
    x = (x or ox) - 1; y = (y or oy) + 1; z = (z or oz)
  elseif has({"northeast", "topright", "ne", "tr"}, w) then
    x = (x or ox) + 1; y = (y or oy) + 1; z = (z or oz)
  elseif has({"southeast", "bottomright", "se", "br"}, w) then
    x = (x or ox) + 1; y = (y or oy) - 1; z = (z or oz)
  elseif has({"southwest", "bottomleft", "sw", "bl"}, w) then
    x = (x or ox) - 1; y = (y or oy) - 1; z = (z or oz)
  elseif has({"up", "u"}, w) then
    x = (x or ox); y = (y or oy); z = (z or oz) + 1
  elseif has({"down", "d"}, w) then
    x = (x or ox); y = (y or oy); z = (z or oz) - 1
  end

  local carea = getRoomArea(mmp.currentroom)
  if not carea then mmp.echo("Don't know what area are we in.") return end

  otherroom = select(2, next(getRoomsByPosition(carea,x,y,z)))

  if not otherroom then
    mmp.echo("There isn't a room to the "..w.." that I see - try with an exact room id.") return
  else
    mmp.echo("The room "..w.." of us has an ID of "..otherroom)
  end

getRoomUserData

getRoomUserData(roomID, key)

Returns the user data value (string) stored at a given room with a given key (string), or "" if none is stored. Use setRoomUserData() function for setting the user data.

Example

display(getRoomUserData(341, "visitcount"))

getRoomUserData(roomID, key, enableFullErrorReporting)

Returns the user data value (string) stored at a given room with a given key (string), or, if the boolean value enableFullErrorReporting is true, nil and an error message if the key is not present or the room does not exist; if enableFullErrorReporting is false an empty string is returned but then it is not possible to tell if that particular value is actually stored or not against the given key.

Example

local vNum = 341
result, errMsg = getRoomUserData(vNum, "visitcount", true)
if result ~= nil then
    display(result)
else
    echo("\nNo visitcount data for room: "..vNum.."; reason: "..errMsg.."\n")
end

getRoomUserDataKeys

getRoomUserDataKeys(roomID)

Returns all the keys for user data items stored in the given room ID; will return an empty table if there is no data stored or nil if there is no such room with that ID. Can be useful if the user was not the one who put the data in the map in the first place!

Example

display(getRoomUserDataKeys(3441))
--might result in:--
{
  "description",
  "doorname_up",
}

Available in Mudlet3.0+

getRoomWeight

getRoomWeight(roomID)

Returns the weight of a room. By default, all new rooms have a weight of 1.

getSpecialExits

exits = getSpecialExits(roomID[, listAllExits])

Parameters

roomID:

Room ID to return the special exits of.

listAllExits:

In the case where there is more than one special exit to the same room ID list all of them.

Returns a roomid table of sub-tables containing name/command and exit lock status, of the special exits in the room. If there are no special exits in the room, the table returned will be empty

Historical Version Note

(Since TBA) In the case where there is more than one special exit to the same room ID list all of them.

Before TBA (likely to be Mudlet version 4.11.0), if more than one special exit goes to the same exit room id then one of those exits is returned at random. Since TBA this will be the best (i.e. lowest-weight) exit that is not locked; should none be unlocked then the lowest locked one will be listed. In case of a tie, one of the tying exits will be picked at random.

getSpecialExitsSwap

getSpecialExitsSwap(roomID)

Very similar to getSpecialExits() function, but returns the rooms in the command - roomid style.

gotoRoom

gotoRoom (roomID): Speedwalks you to the given room from your current room if it is able and knows the way. You must turn the map on for this to work, else it will return "(mapper): Don't know how to get there from here :(".

In case this isn't working, and you are coding your own mapping script, see here how to implement additional functionality necessary.

hasExitLock

status = hasExitLock(roomID, direction)

Returns true or false depending on whenever a given exit leading out from a room is locked. Direction can be specified as a number, short direction name ("nw") or long direction name ("northwest").

Example

-- check if the east exit of room 1201 is locked
display(hasExitLock(1201, 4))
display(hasExitLock(1201, "e"))
display(hasExitLock(1201, "east"))

hasSpecialExitLock

hasSpecialExitLock(from roomID, to roomID, moveCommand)

Returns true or false depending on whenever a given exit leading out from a room is locked. moveCommand is the action to take to get through the gate.

highlightRoom

highlightRoom( roomID, color1Red, color1Green, color1Blue, color2Red, color2Green, color2Blue, highlightRadius, color1Alpha, color2Alpha)

Highlights a room with the given color, which will override its environment color. If you use two different colors, then there'll be a shading from the center going outwards that changes into the other color.

Parameters

roomID

ID of the room to be colored.

color1Red, color1Green, color1Blue

RGB values of the first color.

color2Red, color2Green, color2Blue

RGB values of the second color.

highlightRadius

The radius for the highlight circle - if you don't want rooms beside each other to overlap, use 1 as the radius.

color1Alpha and color2Alpha

Transparency values from 0 (completely transparent) to 255 (not transparent at all).

killMapInfo

killMapInfo(label)

Delete a map info contributor entirely - it will be not available anymore.

Parameters

label:

Name under which map info to be removed was registered.

Available in Mudlet4.11+

loadJsonMap

loadJsonMap(pathFileName)

Parameters

pathFileName a string that is an absolute path and file name to read the data from.

Load the Mudlet map in text (JSON) format. It does take longer than loading usual map file (.dat in binary) so it will show a progress dialog.

loadMap

loadMap(file location)

Loads the map file from a given location. The map file must be in Mudlet's format - saved with saveMap() or, as of the Mudlet 3.0 may be a MMP XML map conforming to the structure used by I.R.E. for their downloadable maps for their MUD games.

Returns a boolean for whenever the loading succeeded. Note that the mapper must be open, or this will fail.

Using no arguments will load the last saved map.

  loadMap("/home/user/Desktop/Mudlet Map.dat")

Note: A file name ending with .xml will indicate the XML format.

lockExit

lockExit(roomID, direction, lockIfTrue)

Locks a given exit from a room. The destination may remain accessible through other paths, unlike lockRoom. Direction can be specified as a number, short direction name ("nw") or long direction name ("northwest").

lockRoom

lockRoom (roomID, lockIfTrue)

Locks a given room id from future speed walks (thus the mapper will never path through that room).

lockSpecialExit

lockSpecialExit (from roomID, to roomID, special exit command, lockIfTrue)

Locks a given special exit, leading from one specific room to another that uses a certain command from future speed walks (thus the mapper will never path through that special exit).

Example

lockSpecialExit(1,2,'enter gate', true) -- locks the special exit that does 'enter gate' to get from room 1 to room 2
lockSpecialExit(1,2,'enter gate', false) -- unlocks the said exit

moveMapWidget

moveMapWidget(Xpos, Ypos): moves the map window to the given position.; See also: openMapWidget(), closeMapWidget(), resizeMapWidget()

Parameters

Xpos:

X position of the map window. Measured in pixels, with 0 being the very left. Passed as an integer number.

Ypos:

Y position of the map window. Measured in pixels, with 0 being the very top. Passed as an integer number.

Available in Mudlet4.7+

openMapWidget

openMapWidget([dockingArea | Xpos, Ypos, width, height])

means either of these are fine:

openMapWidget()
openMapWidget(dockingArea)
openMapWidget(Xpos, Ypos, width, height)

opens a map window with given options.

Available in Mudlet4.7+

Parameters

Note: If no parameter is given the map window will be opened with the saved layout or at the right docking position (similar to clicking the icon)

dockingArea:

If only one parameter is given this parameter will be a string that contains one of the possible docking areas the map window will be created in (f" floating "t" top "b" bottom "r" right and "l" left)

Note: If 4 parameters are given the map window will be created in floating state

Xpos:

X position of the map window. Measured in pixels, with 0 being the very left. Passed as an integer number.

Ypos:

Y position of the map window. Measured in pixels, with 0 being the very left. Passed as an integer number.

width:

The width map window, in pixels. Passed as an integer number.

height:

The height map window, in pixels. Passed as an integer number.

pauseSpeedwalk

pauseSpeedwalk()

Pauses a speedwalk started using speedwalk()

Available in Mudlet4.13+

local ok, err = pauseSpeedwalk()
if not ok then
  debugc(f"Error: unable to pause speedwalk because {err}\n")
  return
end

registerMapInfo

registerMapInfo(label, function)

Adds an extra 'map info' to the mapper widget which can be used to display custom information.

Available in Mudlet4.11+

Note: You can register multiple map infos - just give them unique names and toggle whichever ones you need.

Parameters

label:

Name under which map info will be registered and visible in select box under mapper. You can use it later to kill map info, enable it, disable it or overwrite using registerMapInfo() again.

function:

Callback function that will be responsible for returning information how to draw map info fragment.

Callback function is called with following arguments:

roomId - current roomId or currently selected room (when multiple selection is made this is center room)
selectionSize - how many rooms are selected
areaId - roomId's areaId
displayedAreaId - areaId that is currently displayed

Callback needs to return following:

text - text that will be displayed (when empty, nothing will be displayed, if you want to "reserve" line or lines use not empty value " " or add line breaks "\n")
isBold (optional) - true/false - determines whether text will be bold
isItalic (optional) - true/false - determines whether text will be italic
color r (optional) - color of text red component (0-255)
color g (optional) - color of text green component (0-255)
color b (optional) - color of text blue component (0-255)

Note: Map info is registered in disabled state, you need to enable it through script or by selecting checkbox under mapper.

registerMapInfo("My very own handler!", function(roomId, selectionSize, areaId, displayedArea) 
  return string.format("RoomId: %d\nNumbers of room selected: %d\nAreaId: %d\nDisplaying area: %d", roomId, selectionSize, areaId, displayedArea),
  true, true, 0, 255, 0
end)
enableMapInfo("My very own handler!")

Example will display something like that:

Using function arguments is completely optional and you can determine whether and how to display map info completely externally.

registerMapInfo("Alert", function() 
  if character.hp < 20 then
    return "Look out! Your HP is getting low", true, false, unpack(color_table.red) -- will display red, bolded warning whne character.hp is below 20
  else
    return "" -- will not return anything
  end
end)
enableMapInfo("Alert")

resumeSpeedwalk

resumeSpeedwalk()

Continues a speedwalk paused using pauseSpeedwalk()

Available in Mudlet4.13+

local ok, err = resumeSpeedwalk()
if not ok then
  cecho(f"\n<red>Error:<reset> Problem resuming speedwalk: {err}\n")
  return
end
cecho("\n<green>Successfully resumed speedwalk!\n")

removeCustomLine

removeCustomLine(roomID, direction)

Removes the custom exit line that's associated with a specific exit of a room.

Example

-- remove custom exit line that starts in room 315 going north
removeCustomLine(315, "n")

removeMapEvent

removeMapEvent(event name)

Removes the given menu entry from a mappers right-click menu. You can add custom ones with addMapEvent().

Example

addMapEvent("room a", "onFavorite") -- add one to the general menu
removeMapEvent("room a") -- removes the said menu

removeMapMenu

removeMapMenu(menu name)

Removes the given submenu from a mappers right-click menu. You can add custom ones with addMapMenu().

Example

addMapMenu("Test") -- add submenu to the general menu
removeMapMenu("Test") -- removes that same menu again

removeSpecialExit

removeSpecialExit(roomID, command)

Removes the special exit which is accessed by command from the room with the given roomID.

Example

addSpecialExit(1, 2, "pull rope") -- add a special exit from room 1 to room 2
removeSpecialExit(1, "pull rope") -- removes the exit again

resetRoomArea

resetRoomArea (roomID)

Unassigns the room from its given area. While not assigned, its area ID will be -1. Note that since Mudlet 3.0 the "default area" which has the id of -1 may be selectable in the area selection widget on the mapper - although there is also an option to conceal this in the settings.

resizeMapWidget

resizeMapWidget(width, height): resizes a map window with given width, height.; See also: openMapWidget(), closeMapWidget(), moveMapWidget()

Available in Mudlet4.7+

Parameters

width:

The width of the map window, in pixels. Passed as an integer number.

height:

The height of the map window, in pixels. Passed as an integer number.

roomExists

roomExists(roomID)

Returns a boolean true/false depending if the room with that ID exists (is created) or not.

roomLocked

locked = roomLocked(roomID)

Returns true or false whenever a given room is locked.

saveJsonMap

saveJsonMap([pathFileName])

Saves all the data that is normally held in the Mudlet map (.dat as a binary format) in text (JSON) format. It does take longer to do this, so a progress dialog will be shown indicating the status.

saveMap

saveMap([location], [version])

Saves the map to a given location, and returns true on success. The location folder needs to be already created for save to work. You can also save the map in the Mapper settings tab.

Parameters

location

(optional) save the map to the given location if provided, or the default one otherwise.

version

(optional) map version as a number to use when saving (Mudlet 3.17+)

searchAreaUserData

searchAreaUserData(area number | area name[, case-sensitive [, exact-match]]): Searches Areas' User Data in a manner exactly the same as searchRoomUserData() does in all Rooms' User Data, refer to that command for the specific details except to replace references to rooms and room ID numbers there with areas and areas ID numbers.

searchRoom

searchRoom (room number | room name[, case-sensitive [, exact-match]]): Searches for rooms that match (by case-insensitive, substring match) the given room name. It returns a key-value table in form of roomid = roomname, the optional second and third boolean parameters have been available since Mudlet 3.0;

If no rooms are found, then an empty table is returned.

If you pass it a number instead of a string as just one argument, it'll act like getRoomName() and return the room name.

Examples

-- show the behavior when given a room number:
display(searchRoom(3088))
"The North Road South of Taren Ferry"

-- show the behavior when given a string:
-- shows all rooms containing the text in any case:
display(searchRoom("North road"))
{
   [3114] = "Bend in North road",
   [3115] = "North road",
   [3116] = "North Road",
   [3117] = "North road",
   [3146] = "Bend in the North Road",
   [3088] = "The North Road South of Taren Ferry",
   [6229] = "Grassy Field By North Road"
}
-- or:
--   display(searchRoom("North road",false))
--   display(searchRoom("North road",false,false))
-- would both also produce those results.

-- shows all rooms containing the text in ONLY the letter-case provided:
display(searchRoom("North road",true,false))
{
   [3114] = "Bend in North road",
   [3115] = "North road",
   [3117] = "North road",
}

-- shows all rooms containing ONLY that text in either letter-case:
lua searchRoom("North road",false,true)
{
  [3115] = "North road",
  [3116] = "North Road",
  [3117] = "North road"
}

-- shows all rooms containing only and exactly the given text:
lua searchRoom("North road",true,true)
{
  [3115] = "North road",
  [3117] = "North road"
}

Note: Technically, with both options (case-sensitive and exact-match) set to true, one could just return a list of numbers as we know precisely what the string will be, but it was kept the same for maximum flexibility in user scripts.

searchRoomUserData

searchRoomUserData([key, [value]]): A command with three variants that search though all the rooms in sequence (so not as fast as a user built/maintained index system) and find/reports on the room user data stored:

searchRoomUserData(key, value)

Reports a (sorted) list of all room ids with user data with the given "value" for the given (case sensitive) "key".

searchRoomUserData(key)

Reports a (sorted) list of the unique values from all rooms with user data with the given (case sensitive) "key".

searchRoomUserData()

Reports a (sorted) list of the unique keys from all rooms with user data with any (case sensitive) "key", available since Mudlet 3.0. It is possible (though not recommended) to have a room user data item with an empty string "" as a key, this is handled correctly.

Available in Mudlet3.0+

Examples

-- if I had stored the details of "named doors" as part of the room user data --
display(searchRoomUserData("doorname_up"))

--[[ could result in a list:
{
  "Eastgate",
  "Northgate",
  "boulderdoor",
  "chamberdoor",
  "dirt",
  "floorboards",
  "floortrap",
  "grate",
  "irongrate",
  "rockwall",
  "tomb",
  "trap",
  "trapdoor"
}]]

-- then taking one of these keys --
display(searchRoomUserData("doorname_up","trapdoor"))

--[[ might result in a list:
{
  3441,
  6113,
  6115,
  8890
}
]]

setAreaName

setAreaName(areaID or areaName, newName)

Names, or renames an existing area to the new name. The area must be created first with addAreaName() and it must be unique.

Note: parameter areaName is available since Mudlet 3.0.

setAreaUserData

setAreaUserData(areaID, key (as a string), value (as a string))

Stores information about an area under a given key. Similar to Lua's key-value tables, except only strings may be used here. One advantage of using userdata is that it's stored within the map file itself - so sharing the map with someone else will pass on the user data. Returns a lua true value on success. You can have as many keys as you'd like, however a blank key will not be accepted and will produce a lua nil and an error message instead.

Returns true if successfully set.

Available in Mudlet3.0+

Example

-- can use it to store extra area details...
setAreaUserData(34, "country", "Andor.")

-- or a sound file to play in the background (with a script that checks a room's area when entered)...
setAreaUserData(34, "backgroundSound", "/home/user/mudlet-data/soundFiles/birdsong.mp4")

-- can even store tables in it, using the built-in yajl.to_string function
setAreaUserData(101, "some table", yajl.to_string({ruler = "Queen Morgase Trakand", clan = "Lion Warden"}))
display("The ruler's name is: "..yajl.to_value(getRoomUserData(101, "some table")).ruler)

setCustomEnvColor

setCustomEnvColor(environmentID, r,g,b,a)

Creates, or overrides an already created custom color definition for a given environment ID. Note that this will not work on the default environment colors - those are adjustable by the user in the preferences. You can however create your own environment and use a custom color definition for it.

Note: Numbers 1-16 and 257-272 are reserved by Mudlet. 257-272 are the default colors the user can adjust in mapper settings, so feel free to use them if you'd like - but don't overwrite them with this function.

Default colour table for Mudlet mapper.

Example

setRoomEnv(571, 200) -- change the room's environment ID to something arbitrary, like 200
local r,g,b = unpack(color_table.blue)
setCustomEnvColor(200, r,g,b, 255) -- set the color of environmentID 200 to blue

setDoor

setDoor(roomID, exitCommand, doorStatus)

Creates or deletes a door in a room. Doors are purely visual - they don't affect default pathfinding (use a custom script to overcome this). You can use the information to adjust your speedwalking path based on the door information in a room, though.

Doors CAN be set on stub exits - so that map makers can note if there is an obvious door to somewhere even if they do not (yet) know where it goes, perhaps because they do not yet have the key to open it!

Returns true if the change could be made, false if the input was valid but ineffective (door status was not changed), and nil with a message string on invalid input (value type errors).

setExit

setExit(from roomID, to roomID, direction)

Creates a one-way exit from one room to another using a standard direction - which can be either one of n, ne, nw, e, w, s, se, sw, u, d, in, out, the long version of a direction, or a number which represents a direction. If there was an exit stub in that direction already, then it will be automatically deleted for you.

Returns false if the exit creation didn't work.

setExitStub

setExitStub(roomID, direction, set/unset)

Creates or removes an exit stub from a room in a given directions. You can use exit stubs later on to connect rooms that you're sure of are together. Exit stubs are also shown visually on the map, so the mapper can easily tell which rooms need finishing.

Parameters

roomID:

The room to place an exit stub in, as a number.

direction:

The direction the exit stub should lead in - as a short direction name ("nw"), long direction name ("northwest") or a number.

set/unset:

A boolean to create or delete the exit stub.

Example

Create an exit stub to the south from room 8:

setExitStub(8, "s", true)

How to delete all exit stubs in a room:

for i,v in pairs(getExitStubs(roomID)) do
  setExitStub(roomID, v,false)
end

setExitWeight

setExitWeight(roomID, exitCommand, weight)

Gives an exit a weight, which makes it less likely to be chosen for pathfinding. All exits have a weight of 0 by default, which you can increase. Exit weights are set one-way on an exit - if you'd like the weight to be applied both ways, set it from the reverse room and direction as well.

Parameters

roomID:

Room ID to to set the weight in.

exitCommand:

The direction for the exit is in - it can be one of the following: n, ne, e, se, s, sw, w, nw, up, down, in, out, or, if it's a special exit, the special exit command - note that the strings for normal exits are case-sensitive and must currently be exactly as given here.

weight:

Exit weight - by default, all exits have a weight of 0 meaning that the weight of the destination room is use when the route finding code is considering whether to use that exit; setting a value for an exit can increase or decrease the chance of that exit/destination room being used for a route by the route-finding code. For example, if the destination room has very high weight compared to it's neighbors but the exit has a low value then that exit and thus the room is more likely to be used than if the exit was not weighted.

setGridMode

setGridMode(areaID, true/false)

Enables grid/wilderness view mode for an area - this will cause the rooms to lose their visible exit connections, like you'd see on compressed ASCII maps, both in 2D and 3D view mode; for the 2D map the custom exit lines will also not be shown if this mode is enabled.

Returns true if the area exists, otherwise false.

regular mode

grid mode

setMapUserData

setMapUserData(key (as a string), value (as a string))

Stores information about the map under a given key. Similar to Lua's key-value tables, except only strings may be used here. One advantage of using userdata is that it's stored within the map file itself - so sharing the map with someone else will pass on the user data. You can have as many keys as you'd like.

Returns true if successfully set.

Example

-- store general meta information about the map...
setMapUserData("game_name", "Achaea Mudlet map")

-- or who the author was
setMapUserData("author", "Bob")

-- can even store tables in it, using the built-in yajl.to_string function
setMapUserData("some table", yajl.to_string({game = "mud.com", port = 23}))
display("Available game info in the map: ")
display(yajl.to_value(getMapUserData("some table")))

setMapZoom

setMapZoom(zoom[, areaID])

Zooms the 2D (only) map to a given zoom level. Larger numbers zooms the map further out. Revised in Mudlet 4.17.0 to allow the zoom for an area to be specified even if it is not the one currently being viewed. This change is combined with Mudlet permanently remembering (it is saved within the map file) the zoom level last used for each area and with the addition of the getMapZoom() function.

setRoomArea

setRoomArea(roomID, newAreaID or newAreaName)

Assigns the given room to a new or different area. If the area is displayed in the mapper this will have the room be visually moved into the area as well.

setRoomChar

setRoomChar(roomID, character)

Originally designed for an area in grid mode, takes a single ASCII character and draws it on the rectangular background of the room in the 2D map.

Game-related symbols for your map

toddfast's font - 3000+ scalable vector RPG icons from game-icons.net, as well as a script to download the latest icons and generate a new font.

Example

setRoomChar(431, "#")

setRoomChar(123, "$")

-- emoji's work fine too, and if you'd like it coloured, set the font to Nojo Emoji in settings
setRoomChar(666, "👿")

-- clear a symbol with a space
setRoomChar(123, " ")

Historical version information

Since Mudlet version 3.8 this feature has been extended:

This function will now take a short string of any printable characters as a room symbol, and they will be shrunk to fit them all in horizontally but if they become too small that symbol may not be shown if the zoom is such that the room symbol is too small to be legible.
As "_" is now a valid character an existing symbol may be erased with either a space " " or an empty string "" although neither may be effective in some previous versions of Mudlet.
Should the rooms be set to be drawn as circles this is now accommodated and the symbol will be resized to fit the reduce drawing area this will cause.
The range of characters that are available are now dependent on the fonts present in the system and a setting on the "Mapper" tab in the preferences that control whether a specific font is to be used for all symbols (which is best if a font is included as part of a game server package, but has the issue that it may not be displayable if the user does not have that font or chooses a different one) or any font in the user's system may be used (which is the default, but may not display the glyph {the particular representation of a grapheme in a particular font} that the original map creator expected). Should it not be possible to display the wanted symbol in the map because one or more of the required glyphs are not available in either the specified or any font depending on the setting then the replacement character (Unicode code-point U+FFFD '�') will be shown instead. To allow such missing symbols to be handled the "Mapper" tab on the preferences dialogue has an option to display:

an indicator to show whether the symbol can be made just from the selected font (green tick), from the fonts available in the system (yellow warning triangle) or not at all (red cross)
all the symbols used on the map and how they will be displayed both only using the selected font and all fonts
the sequence of code-points used to create the symbol which will be useful when used in conjunction with character selection utilities such as charmap.exe on Windows and gucharmap on unix-like system
a count of the rooms using the particular symbol
a list, limited in entries of the first rooms using that symbol

The font that is chosen to be used as the primary (or only) one for the room symbols is stored in the Mudlet map data so that setting will be included if a binary map is shared to other Mudlet users or profiles on the same system.

setRoomCharColor

setRoomCharColor(roomId, r, g, b)

Parameters

roomID:

Room ID to to set char color to.

r:

Red component of room char color (0-255)

g:

Green component of room char color (0-255)

b:

Blue component of room char color (0-255)

Sets color for room symbol.

setRoomCharColor(2402, 255, 0, 0)
setRoomCharColor(2403, 0, 255, 0)
setRoomCharColor(2404, 0, 0, 255)

Available in Mudlet4.11+

setRoomCoordinates

setRoomCoordinates(roomID, x, y, z)

Sets the given room ID to be at the following coordinates visually on the map, where z is the up/down level. These coordinates are define the location of the room within a particular area (so not globally on the overall map).

Note: 0,0,0 is the center of the map.

Examples

-- alias pattern: ^set rc (-?\d+) (-?\d+) (-?\d+)$
-- this sets the current room to the supplied coordinates
setRoomCoordinates(roomID,x,y,z)
centerview(roomID)

You can make them relative asa well:

-- alias pattern: ^src (\w+)$

local x,y,z = getRoomCoordinates(previousRoomID)
local dir = matches[2]

if dir == "n" then
  y = y+1
elseif dir == "ne" then
  y = y+1
  x = x+1
elseif dir == "e" then
  x = x+1
elseif dir == "se" then
  y = y-1
  x = x+1
elseif dir == "s" then
  y = y-1
elseif dir == "sw" then
  y = y-1
  x = x-1
elseif dir == "w" then
  x = x-1
elseif dir == "nw" then
  y = y+1
  x = x-1
elseif dir == "u" or dir == "up" then
  z = z+1
elseif dir == "down" then
  z = z-1
end
setRoomCoordinates(roomID,x,y,z)
centerview(roomID)

setRoomEnv

setRoomEnv(roomID, newEnvID)

Sets the given room to a new environment ID. You don't have to use any functions to create it - can just set it right away.

setRoomIDbyHash

setRoomIDbyHash(roomID, hash)

Sets the hash to be associated with the given roomID. See also getRoomIDbyHash().

If the room was associated with a different hash, or vice versa, that association will be superseded.

setRoomName

setRoomName(roomID, newName)

Renames an existing room to a new name.

Example

setRoomName(534, "That evil room I shouldn't visit again.")
lockRoom(534, true) -- and lock it just to be safe

setRoomUserData

setRoomUserData(roomID, key (as a string), value (as a string))

Stores information about a room under a given key. Similar to Lua's key-value tables, except only strings may be used here. One advantage of using userdata is that it's stored within the map file itself - so sharing the map with someone else will pass on the user data. You can have as many keys as you'd like.

Returns true if successfully set.

Example

-- can use it to store room descriptions...
setRoomUserData(341, "description", "This is a plain-looking room.")

-- or whenever it's outdoors or not...
setRoomUserData(341, "outdoors", "true")

-- how how many times we visited that room
local visited = getRoomUserData(341, "visitcount")
visited = (tonumber(visited) or 0) + 1
setRoomUserData(341, "visitcount", tostring(visited))

-- can even store tables in it, using the built-in yajl.to_string function
setRoomUserData(341, "some table", yajl.to_string({name = "bub", age = 23}))
display("The denizens name is: "..yajl.to_value(getRoomUserData(341, "some table")).name)

setRoomWeight

setRoomWeight(roomID, weight)

Sets a weight to the given roomID. By default, all rooms have a weight of 1 - the higher the weight is, the more likely the room is to be avoided for pathfinding. For example, if travelling across water rooms takes more time than land ones - then you'd want to assign a weight to all water rooms, so they'd be avoided if there are possible land pathways.

Note: The minimum allowed room weight is 1.

To completely avoid a room, make use of lockRoom().

speedwalk

speedwalk(dirString, backwards, delay, show)

A speedwalking function will work on cardinal+ordinal directions (n, ne, e, etc.) as well as u (for up), d (for down), in and out. It can be called to execute all directions directly after each other, without delay, or with a custom delay, depending on how fast your game allows you to walk. It can also be called with a switch to make the function reverse the whole path and lead you backwards.

Call the function by doing: speedwalk("YourDirectionsString", true/false, delaytime, true/false)

The delaytime parameter will set a delay between each move (set it to 0.5 if you want the script to move every half second, for instance). It is optional: If you don't indicate it, the script will send all direction commands right after each other. (If you want to indicate a delay, you -have- to explicitly indicate true or false for the reverse flag.)

The show parameter will determine if the commands sent by this function are shown or hidden. It is optional: If you don't give a value, the script will show all commands sent. (If you want to use this option, you -have- to explicitly indicate true or false for the reverse flag, as well as either some number for the delay or nil if you do not want a delay.)

The "YourDirectionsString" contains your list of directions and steps (e.g.: "2n, 3w, u, 5ne"). Numbers indicate the number of steps you want it to walk in the direction specified after it. The directions must be separated by anything other than a letter that can appear in a direction itself. (I.e. you can separate with a comma, spaces, the letter x, etc. and any such combinations, but you cannot separate by the letter "e", or write two directions right next to each other with nothing in-between, such as "wn". If you write a number before every direction, you don't need any further separator. E.g. it's perfectly acceptable to write "3w1ne2e".) The function is not case-sensitive.

If your game only has cardinal directions (n,e,s,w and possibly u,d) and you wish to be able to write directions right next to each other like "enu2s3wdu", you'll have to change the pattern slightly. Likewise, if your game has any other directions than n, ne, e, se, s, sw, w, nw, u, d, in, out, the function must be adapted to that.

Example

speedwalk("16d1se1u")
-- Will walk 16 times down, once southeast, once up. All in immediate succession.

speedwalk("2ne,3e,2n,e")
-- Will walk twice northeast, thrice east, twice north, once east. All in immediate succession.

speedwalk("IN N 3W 2U W", false, 0.5)
-- Will walk in, north, thrice west, twice up, west, with half a second delay between every move.

speedwalk("5sw - 3s - 2n - w", true)
-- Will walk backwards: east, twice south, thrice north, five times northeast. All in immediate succession.

speedwalk("3w, 2ne, w, u", true, 1.25)
-- Will walk backwards: down, east, twice southwest, thrice east, with 1.25 seconds delay between every move.

Note: The probably most logical usage of this would be to put it in an alias. For example, have the pattern ^/(.+)$ execute: speedwalk(matches[2], false, 0.7) And have ^//(.+)$ execute: speedwalk(matches[2], true, 0.7) Or make aliases like: ^banktohome$ to execute speedwalk("2ne,e,ne,e,3u,in", true, 0.5)

Note: The show parameter for this function is available in Mudlet 3.12+

stopSpeedwalk

stopSpeedwalk()

Stops a speedwalk started using speedwalk()

Available in Mudlet4.13+

local ok, err = stopSpeedwalk()
if not ok then
  cecho(f"\n<red>Error:<reset> {err}")
  return
end
cecho(f"\n<green>Success:<reset> speedwalk stopped")

unHighlightRoom

unHighlightRoom(roomID)

Unhighlights a room if it was previously highlighted and restores the rooms original environment color.

unsetRoomCharColor

unsetRoomCharColor(roomId)

Parameters

roomID:

Room ID to to unset char color to.

Removes char color setting from room, back to automatic determination based on room background lightness.

unsetRoomCharColor(2031)

Available in Mudlet4.11+

updateMap

updateMap()

Updates the mapper display (redraws it). Use this function if you've edited the map via script and would like the changes to show.

Miscellaneous Functions

addFileWatch

addFileWatch(path): Adds file watch on directory or file. Every change in that file (or directory) will raise sysPathChanged event.

addSupportedTelnetOption

addSupportedTelnetOption(option): Adds a telnet option, which when queried by a game server, Mudlet will return DO (253) on. Use this to register the telnet option that you will be adding support for with Mudlet - see additional protocols section for more.

Example

<event handlers that add support for MSDP... see http://www.mudbytes.net/forum/comment/63920/#c63920 for an example>

-- register with Mudlet that it should not decline the request of MSDP support
local TN_MSDP = 69
addSupportedTelnetOption(TN_MSDP)

alert

alert([seconds]): alerts the user to something happening - makes Mudlet flash in the Windows window bar, bounce in the macOS dock, or flash on Linux.

Available in Mudlet3.2+

Parameters

seconds:

(optional) number of seconds to have the alert for. If not provided, Mudlet will flash until the user opens Mudlet again.

Example

-- flash indefinitely until Mudlet is open
alert()

-- flash for just 3 seconds
alert(3)

cfeedTriggers

cfeedTriggers(text): Like feedTriggers, but you can add color information using color names, similar to cecho.

Parameters

text: The string to feed to the trigger engine. Include colors by name as black,red,green,yellow,blue,magenta,cyan,white and light_* versions of same. You can also use a number to get the ansi color corresponding to that number.

closeMudlet

closeMudlet()

Closes Mudlet and all profiles immediately.

deleteAllNamedEventHandlers

deleteAllNamedEventHandlers(userName)

Deletes all named event handlers for userName and prevents them from firing any more. Information is deleted and cannot be retrieved.

See also: registerNamedEventHandler(), stopNamedEventHandler()

Available in Mudlet4.14+

Parameters

userName:

The user name the event handler was registered under.

Example

deleteAllNamedEventHandlers("Demonnic") -- emergency stop or debugging situation, most likely.

deleteNamedEventHandler

success = deleteNamedEventHandler(userName, handlerName)

Deletes a named event handler with name handlerName and prevents it from firing any more. Information is deleted and cannot be retrieved.

See also: registerNamedEventHandler(), stopNamedEventHandler()

Available in Mudlet4.14+

Parameters

userName:

The user name the event handler was registered under.

handlerName:

The name of the handler to stop. Same as used when you called registerNamedEventHandler()

Returns

true if successful, false if it didn't exist

Example

local deleted = deleteNamedEventHandler("Demonnic", "Vitals")
if deleted then
  cecho("Vitals deleted forever!!")
else
  cecho("Vitals doesn't exist and so could not be deleted.")
end

denyCurrentSend

denyCurrentSend()

Cancels a send() or user-entered command, but only if used within a sysDataSendRequest event.

Example

-- cancels all "eat hambuger" commands
function cancelEatHamburger(event, command)
  if command == "eat hamburger" then
    denyCurrentSend()
    cecho("<red>Denied! Didn't let the command through.\n")
  end
end

registerAnonymousEventHandler("sysDataSendRequest", "cancelEatHamburger")

dfeedTriggers

dfeedTriggers(str): Like feedTriggers, but you can add color information using <r,g,b>, similar to decho.

Parameters

str: The string to feed to the trigger engine. Include color information inside tags like decho.

See also: cfeedTriggers, decho

Available in Mudlet4.11+

Example

dfeedTriggers("<0,128,0:128,0,0>green on red<r> reset\n")

disableModuleSync

disableModuleSync(name): Stops syncing the given module.

Parameter

name: name of the module.

Available in Mudlet4.8+

enableModuleSync

enableModuleSync(name): Enables the sync for the given module name - any changes done to it will be saved to disk and if the module is installed in any other profile(s), it'll be updated in them as well on profile save.

Parameter

name: name of the module to enable sync on.

Available in Mudlet4.8+

expandAlias

expandAlias(command, [echoBackToBuffer]): Runs the command as if it was from the command line - so aliases are checked and if none match, it's sent to the game unchanged.

Parameters

command

Text of the command you want to send to the game. Will be checked for aliases.

echoBackToBuffer

(optional) If false, the command will not be echoed back in your buffer. Defaults to true if omitted.

Note: Using expandAlias is not recommended anymore as it is not very robust and may lead to problems down the road. The recommendation is to use lua functions instead. See Manual:Functions_vs_expandAlias for details and examples.

Note: If you want to be using the matches table after calling expandAlias, you should save it first, as, e.g. local oldmatches = matches before calling expandAlias, since expandAlias will overwrite it after using it again.

Note: Since Mudlet 3.17.1 the optional second argument to echo the command on screen will be ineffective whilst the game server has negotiated the telnet ECHO option to provide the echoing of text we send to him.

Example

expandAlias("t rat")

-- don't echo the command
expandAlias("t rat", false)

feedTriggers

feedTriggers(text[, dataIsUtf8Encoded = true]): This function will have Mudlet parse the given text as if it came from the game - one great application is trigger testing. The built-in `echo alias provides this functionality as well.

Parameters

text:

string which is sent to the trigger processing system almost as if it came from the game server. This string must be byte encoded in a manner to match the currently selected Server Encoding.

dataIsUtf8Encoded (available in Mudlet 4.2+):

Set this to false, if you need pre-Mudlet 4.0 behavior. Most players won't need this.

(Before Mudlet 4.0 the text had to be encoded directly in whatever encoding the setting in the preferences was set to.

(Encoding could involve using the Lua string character escaping mechanism of \ and a base 10 number for character codes from \1 up to \255 at maximum)

Since Mudlet 4.0 it is assumed that the text is UTF-8 encoded. It will then be automatically converted to the currently selected game server encoding.

Preventing the automatic conversion can be useful to Mudlet developers testing things, or possibly to those who are creating handlers for Telnet protocols within the Lua subsystem, who need to avoid the transcoding of individual protocol bytes, when they might otherwise be seen as extended ASCII characters.)

Returns (available in Mudlet 4.2+)

true on success, nil and an error message if the text contains characters that cannot be conveyed by the current Game Server encoding.

Note: It is important to ensure that in Mudlet 4.0.0 and beyond the text data only contains characters that can be encoded in the current Game Server encoding, from 4.2.0 the content is checked that it can successfully be converted from the UTF-8 that the Mudlet Lua subsystem uses internally into that particular encoding and if it cannot the function call will fail and not pass any of the data, this will be significant if the text component contains any characters that are not plain ASCII.

Example

-- try using this on the command line
`echo This is a sample line from the game

-- You can use \n to represent a new line - you also want to use it before and after the text you’re testing, like so:
feedTriggers("\nYou sit yourself down.\n")

-- The function also accept ANSI color codes that are used in games. A sample table can be found http://codeworld.wikidot.com/ansicolorcodes
feedTriggers("\nThis is \27[1;32mgreen\27[0;37m, \27[1;31mred\27[0;37m, \27[46mcyan background\27[0;37m," ..
"\27[32;47mwhite background and green foreground\27[0;37m.\n")

getCharacterName

getCharacterName()

Returns the name entered into the "Character name" field on the Connection Preferences form. Can be used to find out the name that might need to be handled specially in scripts or anything that needs to be personalized to the player. If there is nothing set in that entry will return an empty string.

getConfig

getConfig([option])

Returns configuration options similar to those that can be set with setConfig. One could use this to decide if a script should notify the user of suggested changes.

getModulePath

path = getModulePath(module name)

Returns the location of a module on the disk. If the given name does not correspond to an installed module, it'll return nil

getModulePriority

priority = getModulePriority(module name)

Returns the priority of a module as an integer. This determines the order modules will be loaded in - default is 0. Useful if you have a module that depends on another module being loaded first, for example.

Modules with priority -1 will be loaded before scripts (Mudlet 4.11+).

getModules

getModules()

Returns installed modules as table.

getModuleInfo

getModuleInfo(moduleName, [info])

Returns table with meta information for a package

Parameters

moduleName:

Name of the package

info:

(optional) specific info wanted to get, if not given all available meta-info is returned

getModuleSync

getModuleSync(name): returns false if module sync is not active, true if it is active and nil if module is not found.

Parameter

name: name of the module

Available in Mudlet4.8+

getMudletHomeDir

getMudletHomeDir(): Returns the current home directory of the current profile. This can be used to store data, save statistical information, or load resource files from packages.

Note: intentionally uses forward slashes / as separators on Windows since stylesheets require them.

Example

-- save a table
table.save(getMudletHomeDir().."/myinfo.dat", myinfo)

-- or access package data. The forward slash works even on Windows fine
local path = getMudletHomeDir().."/mypackagename"

getMudletInfo

getMudletInfo(): Prints debugging information about the Mudlet that you're running - this can come in handy for diagnostics.

Don't use this command in your scripts to find out if certain features are supported in Mudlet - there are better functions available for this.

Available in Mudlet4.8+

Example

getMudletInfo()

getMudletVersion

getMudletVersion(style): Returns the current Mudlet version. Note that you shouldn't hardcode against a specific Mudlet version if you'd like to see if a function is present - instead, check for the existence of the function itself. Otherwise, checking for the version can come in handy if you'd like to test for a broken function or so on.

getNewIDManager

getNewIDManager()

Returns an IDManager object, for manager your own set of named events and timers isolated from the rest of the profile.

See also: registerNamedEventHandler(), registerNamedTimer()

Available in Mudlet4.14+

Note: Full IDManager usage can be found at IDManager

Returns

an IDManager for managing your own named events and timers

Example

demonnic = demonnic or {}
demonnic.IDManager = getNewIDManager()
local idm = demonnic.IDManager
-- assumes you have defined demonnic.vitalsUpdate and demonnic.balanceChecker as functions
idm:registerEvent("DemonVitals", "gmcp.Char.Vitals", demonnic.vitalsUpdate)
idm:registerTimer("Balance Check", 1, demonnic.balanceChecker)
idm:stopEvent("DemonVitals")

getNamedEventHandlers

handlers = getNamedEventHandlers(userName)

Returns a list of all userName's named event handlers' names as a table.

See also: registerNamedEventHandler()

Available in Mudlet4.14+

Parameters

userName:

The user name the event handler was registered under.

Returns

a table of handler names. { "DemonVitals", "DemonInv" } for example. {} if none are registered

Example

  local handlers = getNamedEventHandlers()
  display(handlers)
  -- {}
  registerNamedEventHandler("Test1", "testEvent", "testFunction")
  registerNamedEventHandler("Test2", "someOtherEvent", myHandlerFunction)
  handlers = getNamedEventHandlers()
  display(handlers)
  -- { "Test1", "Test2" }

getOS

getOS()

Returns the name of the Operating System (OS). Useful for applying particular scripts only under particular operating systems, such as applying a stylesheet only when the OS is Windows.

Returned text will be one of these: "windows", "mac", "linux", as well as "cygwin", "hurd", "freebsd", "kfreebsd", "openbsd", "netbsd", "bsd4", "unix" or "unknown" otherwise.

Additionally returns the version of the OS, and if using Linux, the distribution in use (as of Mudlet 4.12+).

Example

display(getOS())

if getOS() == "windows" then
  echo("\nWindows OS detected.\n")
else
  echo("\nDetected Operating system is NOT windows.\n")
end

if mudlet.supports.osVersion then
  local os, osversion = getOS()
  print(f"Running {os} {osversion}")
end

getPackages

getPackages()

Returns installed packages as table.

getPackageInfo

getPackageInfo(packageName, [info])

Returns table with meta information for a package

Parameters

packageName:

Name of the package

info:

(optional) specific information to retrieve which can be one of; author, created, description, icon, mpackage (package name), title or version. If not given all available meta-info is returned.

getPlayingMusic

getPlayingMusic(settings table): List all playing music (no filter), or playing music that meets a combination of filters (name, key, and tag) intended to be paired with playMusicFile().

Required	Key	Value	Purpose
No	name	<file name>	Name of the media file.
No	key	<key>	Uniquely identifies media files with a "key" that is bound to their "name" or "url".
No	tag	<tag>	Helps categorize media.

Available in Mudlet4.18+

Example

---- Table Parameter Syntax ----

-- List all playing music files for this profile associated with the API
getPlayingMusic()

-- List all playing music matching the rugby mp3 name
getPlayingMusic({name = "167124__patricia-mcmillen__rugby-club-in-spain.mp3"})

-- List all playing music matching the unique key of "rugby"
getPlayingMusic({
    name = nil  -- nil lines are optional, no need to use
    , key = "rugby" -- key
    , tag = nil  -- nil lines are optional, no need to use
})

---- Ordered Parameter Syntax of getPlayingMusic([name][,key][,tag]) ----

-- List all playing music files for this profile associated with the API
getPlayingMusic()

-- List all playing music matching the rugby mp3 name
getPlayingMusic("167124__patricia-mcmillen__rugby-club-in-spain.mp3")

-- List all playing music matching the unique key of "rugby"
getPlayingMusic(
    nil -- name
    , "rugby" -- key
    , nil -- tag
)

getPlayingSounds

getPlayingSounds(settings table): List all playing sounds (no filter), or playing sounds that meets a combination of filters (name, key, tag, and priority) intended to be paired with playSoundFile().

Required	Key	Value	Purpose
No	name	<file name>	Name of the media file.
No	key	<key>	Uniquely identifies media files with a "key" that is bound to their "name" or "url".
No	tag	<tag>	Helps categorize media.
No	priority	<priority>	Matches media files with equal or lower priority.

Available in Mudlet4.18+

Example

---- Table Parameter Syntax ----

-- List all playing sounds for this profile associated with the API
getPlayingSounds()

-- List all playing sounds matching the rugby mp3 name
getPlayingSounds({name = "167124__patricia-mcmillen__rugby-club-in-spain.mp3"})

-- List the playing sound matching the unique key of "rugby"
getPlayingSounds({
    name = nil  -- nil lines are optional, no need to use
    , key = "rugby" -- key
    , tag = nil  -- nil lines are optional, no need to use
})

---- Ordered Parameter Syntax of getPlayingSounds([name][,key][,tag][,priority]) ----

-- List all playing sounds for this profile associated with the API
getPlayingSounds()

-- List all playing sounds matching the rugby mp3 name
getPlayingSounds("167124__patricia-mcmillen__rugby-club-in-spain.mp3")

-- List the playing sound matching the unique key of "rugby"
getPlayingSounds(
    nil -- name
    , "rugby" -- key
    , nil -- tag
    , nil -- priority
)

getProfileName

getProfileName()

Returns the name of the profile. Useful when combined with raiseGlobalEvent() to know which profile a global event came from.

Available in Mudlet3.1+

Example

-- if connected to the Achaea profile, will print Achaea to the main console
echo(getProfileName())

getCommandSeparator

getCommandSeparator()

Returns the command separator in use by the profile.

Available in Mudlet3.18+

Example

-- if your command separator is ;;, the following would send("do thing 1;;do thing 2"). 
-- This way you can determine what it is set to and use that and share this script with 
-- someone who has changed their command separator.
-- Note: This is not really the preferred way to send this, using sendAll("do thing 1", "do thing 2") is,
--       but this illustates the use case.
local s = getCommandSeparator()
expandAlias("do thing 1" .. s .. "do thing 2")

getServerEncoding

getServerEncoding(): Returns the current server data encoding in use.

Example

getServerEncoding()

getServerEncodingsList

getServerEncodingsList(): Returns an indexed list of the server data encodings that Mudlet knows. This is not the list of encodings the servers knows - there's unfortunately no agreed standard for checking that. See encodings in Mudlet for the list of which encodings are available in which Mudlet version.

Example

-- check if UTF-8 is available:
if table.contains(getServerEncodingsList(), "UTF-8") then
  print("UTF-8 is available!")
end

getWindowsCodepage

getWindowsCodepage(): Returns the current codepage of your Windows system.

Available in Mudlet3.22+

Note: This function only works on Windows - It is only needed internally in Mudlet to enable Lua to work with non-ASCII usernames (e.g. Iksiński, Jäger) for the purposes of IO. Linux and macOS work fine with with these out of the box.

Example

print(getWindowsCodepage())

hfeedTriggers

hfeedTriggers(str): Like feedTriggers, but you can add color information using #RRGGBB in hex, similar to hecho.

Parameters

str: The string to feed to the trigger engine. Include color information in the same manner as hecho.

holdingModifiers

holdingModifiers(number): Returns true or false depending on whether a particular modifier key is being held at the time this function is run. Can be paired with a number of actions, including clicking on a label.

Parameters

number: A number corresponding to a specific modifier key.

Modifiers

Modifier values can be found by accessing the global `mudlet.keymodifier` table, which, as of 4.18, provides for the following:

{
  Alt = 134217728,
  Control = 67108864,
  GroupSwitch = 1073741824,
  Keypad = 536870912,
  Meta = 268435456,
  None = 0,
  Shift = 33554432
}

Example

local MyLabel = MyLabel or Geyser.Label:new({
  name = "MyLabel",
  x = 0,y = 0,
  height = 200, width = 100,
  message = "This is my label"
})

function clickity(...)
  display(...)
  
  for k, v in spairs(mudlet.keymodifier) do
    print(f[[Holding down {k} : {holdingModifiers(v)}]])
  end
end

setLabelClickCallback("MyLabel", "clickity")

-- Result:
--
-- Holding down Alt : true
-- Holding down Control : false
-- Holding down GroupSwitch : false
-- Holding down Keypad : false
-- Holding down Meta : false
-- Holding down None : false
-- Holding down Shift : false

Notes

You may only test for one modifier key being held. If more than one modifier key is held down, then all results will be false.

installModule

installModule(location): Installs a Mudlet XML, zip, or mpackage as a module.

Parameters

location:

Exact location of the file install.

Example

installModule([[C:\Documents and Settings\bub\Desktop\myalias.xml]])

installPackage

installPackage(location or url): Installs a Mudlet XML or package. Since Mudlet 4.11+ returns true if it worked, or false.

Parameters

location:

Exact location of the xml or package to install.

Since Mudlet 4.11+ it is possible to pass download link to a package (must start with http or https and end with .xml, .zip, .mpackage or .trigger)

killAnonymousEventHandler

killAnonymousEventHandler(handler id): Disables and removes the given event handler.

Parameters

handler id

ID of the event handler to remove as returned by the registerAnonymousEventHandler function.

loadMusicFile

loadMusicFile(settings table) or loadMusicFile(name, [url]): Loads music files from the Internet or the local file system to the "media" folder of the profile for later use with playMusicFile() and stopMusic(). Although files could be loaded directly at playing time from playMusicFile(), loadMusicFile() provides the advantage of loading files in advance.

Required	Key	Value	Purpose
Yes	name	<file name>	Name of the media file. May contain directory information (i.e. weather/lightning.wav). May be part of the profile (i.e. getMudletHomeDir().. "/cow.mp3") May be on the local device (i.e. "C:/Users/YourNameHere/Documents/nevergoingtogiveyouup.mp3")
Maybe	url	<url>	Resource location where the media file may be downloaded. Only required if file to load is not part of the profile or on the local file system.

Available in Mudlet4.15+

Example

---- Table Parameter Syntax ----

-- Download from the Internet
loadMusicFile({
    name = "167124__patricia-mcmillen__rugby-club-in-spain.mp3"
    , url = "https://raw.githubusercontent.com/StickMUD/StickMUDSounds/master/sounds/"
})

-- OR download from the profile
loadMusicFile({name = getMudletHomeDir().. "/167124__patricia-mcmillen__rugby-club-in-spain.mp3"})

-- OR download from the local file system
loadMusicFile({name = "C:/Users/Tamarindo/Documents/167124__patricia-mcmillen__rugby-club-in-spain.mp3"})

---- Ordered Parameter Syntax of loadMusicFile(name[, url]) ----

-- Download from the Internet
loadMusicFile(
    "167124__patricia-mcmillen__rugby-club-in-spain.mp3"
    , "https://raw.githubusercontent.com/StickMUD/StickMUDSounds/master/sounds/"
)

-- OR download from the profile
loadMusicFile(getMudletHomeDir().. "/167124__patricia-mcmillen__rugby-club-in-spain.mp3")

-- OR download from the local file system
loadMusicFile("C:/Users/Tamarindo/Documents/167124__patricia-mcmillen__rugby-club-in-spain.mp3")

loadSoundFile

loadSoundFile(settings table) or loadSoundFile(name, [url]): Loads sound files from the Internet or the local file system to the "media" folder of the profile for later use with playSoundFile() and stopSounds(). Although files could be loaded directly at playing time from playSoundFile(), loadSoundFile() provides the advantage of loading files in advance.

Required	Key	Value	Purpose
Yes	name	<file name>	Name of the media file. May contain directory information (i.e. weather/lightning.wav). May be part of the profile (i.e. getMudletHomeDir().. "/cow.mp3") May be on the local device (i.e. "C:/Users/YourNameHere/Documents/nevergoingtogiveyouup.mp3")
Maybe	url	<url>	Resource location where the media file may be downloaded. Only required if file to load is not part of the profile or on the local file system.

Available in Mudlet4.15+

Example

---- Table Parameter Syntax ----

-- Download from the Internet
loadSoundFile({
    name = "cow.wav"
    , url = "https://raw.githubusercontent.com/StickMUD/StickMUDSounds/master/sounds/"
})

-- OR download from the profile
loadSoundFile({name = getMudletHomeDir().. "/cow.wav"})

-- OR download from the local file system
loadSoundFile({name = "C:/Users/Tamarindo/Documents/cow.wav"})

---- Ordered Parameter Syntax of loadSoundFile(name[,url]) ----

-- Download from the Internet
loadSoundFile("cow.wav", "https://raw.githubusercontent.com/StickMUD/StickMUDSounds/master/sounds/")

-- OR download from the profile
loadSoundFile(getMudletHomeDir().. "/cow.wav")

-- OR download from the local file system
loadSoundFile("C:/Users/Tamarindo/Documents/cow.wav")

mudletOlderThan

mudletOlderThan(major, [minor], [patch]): Returns true if Mudlet is older than the given version to check. This is useful if you'd like to use a feature that you can't check for easily, such as coroutines support. However, if you'd like to check if a certain function exists, do not use this and use if mudletfunction then - it'll be much more readable and reliable.

openWebPage

openWebPage(URL): Opens the browser to the given webpage.

Parameters

URL:

Exact URL to open.

Example

openWebPage("http://google.com")

Note: This function can be used to open a local file or file folder as well by using "file:///" and the file path instead of "http://".

Example

openWebPage("file:///"..getMudletHomeDir().."file.txt")

playMusicFile

playMusicFile(settings table): Plays music files from the Internet or the local file system to the "media" folder of the profile for later use with stopMusic().

Required	Key	Value	Default	Purpose
Yes	name	<file name>		Name of the media file. May contain directory information (i.e. weather/lightning.wav). May be part of the profile (i.e. getMudletHomeDir().. "/cow.mp3") May be on the local device (i.e. "C:/Users/YourNameHere/Documents/nevergoingtogiveyouup.mp3") Wildcards * and ? may be used within the name to randomize media files selection.
No	volume	1 to 100	50	Relative to the volume set on the player's client.
No	fadein	<msec>		Volume increases, or fades in, ranged across a linear pattern from one to the volume set with the "volume" key. Start position: Start of media. End position: Start of media plus the number of milliseconds (msec) specified. 1000 milliseconds = 1 second.
No	fadeout	<msec>		Volume decreases, or fades out, ranged across a linear pattern from the volume set with the "volume" key to one. Start position: End of the media minus the number of milliseconds (msec) specified. End position: End of the media. 1000 milliseconds = 1 second.
No	start	<msec>	0	Begin play at the specified position in milliseconds.
No	finish	<msec>		End play at the specified position in milliseconds.
No	loops	-1, or >= 1	1	Number of iterations that the media plays. A value of -1 allows the media to loop indefinitely.
No	key	<key>		Uniquely identifies media files with a "key" that is bound to their "name" or "url". Halts the play of current media files with the same "key" that have a different "name" or "url" while this media plays.
No	tag	<tag>		Helps categorize media.
No	continue	true or false	true	Continues playing matching new music files when true. Restarts matching new music files when false.
Maybe	url	<url>		Resource location where the media file may be downloaded. Only required if the file is to be downloaded remotely.

Note: on Windows and certain files are not playing? Try installing the 3rd party K-lite codec pack.

Available in Mudlet4.15+

Example

---- Table Parameter Syntax ----

-- Play a music file stored in the profile's media directory (i.e. /Users/Tamarindo/mudlet-data/profiles/StickMUD/media)
playMusicFile({
    name = "167124__patricia-mcmillen__rugby-club-in-spain.mp3"
})

-- OR copy once from the game's profile, and play a music file stored in the profile's media directory
---- [volume] of 75 (1 to 100)
playMusicFile({
    name = getMudletHomeDir().. "/167124__patricia-mcmillen__rugby-club-in-spain.mp3"
    , volume = 75
})

-- OR copy once from the local file system, and play a music file stored in the profile's media directory
---- [volume] of 75 (1 to 100)
playMusicFile({
    name = "C:/Users/Tamarindo/Documents/167124__patricia-mcmillen__rugby-club-in-spain.mp3"
    , volume = 75
})

-- OR download once from the Internet, and play music stored in the profile's media directory
---- [fadein] and increase the volume from 1 at the start position to default volume up until the position of 20 seconds
---- [fadeout] and decrease the volume from default volume to one, 53 seconds from the end of the music
---- [start] 10 seconds after position 0 (fadein scales its volume increase over a shorter duration, too)
---- [finish] 110 seconds from the track start (fadeout scales its volume decrease over a shorter duration, too)
---- [key] reference of "rugby" for stopping this unique music later
---- [tag] reference of "ambience" to stop and music later with the same tag
---- [continue] playing this music if another request for the same music comes in (false restarts it) 
---- [url] to download once from the Internet if the music does not exist in the profile's media directory
playMusicFile({
    name = "167124__patricia-mcmillen__rugby-club-in-spain.mp3"
    , volume = nil -- nil lines are optional, no need to use
    , fadein = 20000
    , fadeout = 53000
    , start = 10000
    , finish = 110000
    , loops = nil -- nil lines are optional, no need to use
    , key = "rugby"
    , tag = "ambience"
    , continue = true
    , url = "https://raw.githubusercontent.com/StickMUD/StickMUDSounds/master/sounds/"
})

---- Ordered Parameter Syntax of playMusicFile(name[,volume][,fadein][,fadeout][,loops][,key][,tag][,continue][,url][,finish]) ----

-- Play a music file stored in the profile's media directory (i.e. /Users/Tamarindo/mudlet-data/profiles/StickMUD/media)
playMusicFile(
    "167124__patricia-mcmillen__rugby-club-in-spain.mp3"  -- name
)

-- OR copy once from the game's profile, and play a music file stored in the profile's media directory
---- [volume] of 75 (1 to 100)
playMusicFile(
    getMudletHomeDir().. "/167124__patricia-mcmillen__rugby-club-in-spain.mp3" -- name
    , 75 -- volume
)

-- OR copy once from the local file system, and play a music file stored in the profile's media directory
---- [volume] of 75 (1 to 100)
playMusicFile(
    "C:/Users/Tamarindo/Documents/167124__patricia-mcmillen__rugby-club-in-spain.mp3" -- name
    , 75 -- volume
)

-- OR download once from the Internet, and play music stored in the profile's media directory
---- [fadein] and increase the volume from 1 at the start position to default volume up until the position of 20 seconds
---- [fadeout] and decrease the volume from default volume to one, 53 seconds from the end of the music
---- [start] 10 seconds after position 0 (fadein scales its volume increase over a shorter duration, too)
---- [finish] 110 seconds from the track start (fadeout scales its volume decrease over a shorter duration, too)
---- [key] reference of "rugby" for stopping this unique music later
---- [tag] reference of "ambience" to stop and music later with the same tag
---- [continue] playing this music if another request for the same music comes in (false restarts it) 
---- [url] to download once from the Internet if the music does not exist in the profile's media directory
playMusicFile(
    "167124__patricia-mcmillen__rugby-club-in-spain.mp3" -- name
    , nil -- volume
    , 20000 -- fadein
    , 53000 -- fadeout
    , 10000 -- start
    , nil -- loops
    , "rugby" -- key 
    , "ambience" -- tag
    , true -- continue
    , "https://raw.githubusercontent.com/StickMUD/StickMUDSounds/master/sounds/" -- url
    , 110000 -- finish
)

playSoundFile

playSoundFile(settings table): Plays sound files from the Internet or the local file system to the "media" folder of the profile for later use with stopSounds().

Required	Key	Value	Default	Purpose
Yes	name	<file name>		Name of the media file. May contain directory information (i.e. weather/lightning.wav). May be part of the profile (i.e. getMudletHomeDir().. "/cow.mp3") May be on the local device (i.e. "C:/Users/YourNameHere/Documents/nevergoingtogiveyouup.mp3") Wildcards * and ? may be used within the name to randomize media files selection.
No	volume	1 to 100	50	Relative to the volume set on the player's client.
No	fadein	<msec>		Volume increases, or fades in, ranged across a linear pattern from one to the volume set with the "volume" key. Start position: Start of media. End position: Start of media plus the number of milliseconds (msec) specified. 1000 milliseconds = 1 second.
No	fadeout	<msec>		Volume decreases, or fades out, ranged across a linear pattern from the volume set with the "volume" key to one. Start position: End of the media minus the number of milliseconds (msec) specified. End position: End of the media. 1000 milliseconds = 1 second.
No	start	<msec>	0	Begin play at the specified position in milliseconds.
No	finish	<msec>		Finish play at the specified position in milliseconds.
No	loops	-1, or >= 1	1	Number of iterations that the media plays. A value of -1 allows the media to loop indefinitely.
No	key	<key>		Uniquely identifies media files with a "key" that is bound to their "name" or "url". Halts the play of current media files with the same "key" that have a different "name" or "url" while this media plays.
No	tag	<tag>		Helps categorize media.
No	priority	1 to 100		Halts the play of current or future played media files with a lower priority while this media plays.
Maybe	url	<url>		Resource location where the media file may be downloaded. Only required if the file is to be downloaded remotely.

Note: on Windows and certain files are not playing? Try installing the 3rd party K-lite codec pack.

Available in Mudlet4.15+

Example

---- Table Parameter Syntax ----

-- Play a sound file stored in the profile's media directory (i.e. /Users/Tamarindo/mudlet-data/profiles/StickMUD/media)
playSoundFile({
    name = "cow.wav"
})

-- OR copy once from the game's profile, and play a sound file stored in the profile's media directory
---- [volume] of 75 (1 to 100)
playSoundFile({
    name = getMudletHomeDir().. "/cow.wav"
    , volume = 75
})

-- OR copy once from the local file system, and play a sound file stored in the profile's media directory
---- [volume] of 75 (1 to 100)
playSoundFile({
    name = "C:/Users/Tamarindo/Documents/cow.wav"
    , volume = 75
})

-- OR download once from the Internet, and play a sound stored in the profile's media directory
---- [volume] of 75
---- [loops] of 2 (-1 for indefinite repeats, 1+ for finite repeats)
---- [key] reference of "cow" for stopping this unique sound later
---- [tag] reference of "animals" to stop a group of sounds later with the same tag
---- [priority] of 25 (1 to 100, 50 default, a sound with a higher priority would stop this one)
---- [url] to download once from the Internet if the sound does not exist in the profile's media directory
playSoundFile({
    name = "cow.wav"
    , volume = 75
    , fadein = nil -- nil lines are optional, no need to use
    , fadeout = nil -- nil lines are optional, no need to use
    , start = nil -- nil lines are optional, no need to use
    , finish = nil -- nil lines are optional, no need to use
    , loops = 2
    , key = "cow"
    , tag = "animals"
    , priority = 25
    , url = "https://raw.githubusercontent.com/StickMUD/StickMUDSounds/master/sounds/"
})

---- Ordered Parameter Syntax of playSoundFile(name[,volume][,fadein][,fadeout][,loops][,key][,tag][,priority][,url][,finish]) ----

-- Play a sound file stored in the profile's media directory (i.e. /Users/Tamarindo/mudlet-data/profiles/StickMUD/media)
playSoundFile(
    "cow.wav" -- name
)

-- OR copy once from the game's profile, and play a sound file stored in the profile's media directory
---- [volume] of 75 (1 to 100)
playSoundFile(
    getMudletHomeDir().. "/cow.wav" -- name
    , 75 -- volume
)

-- OR copy once from the local file system, and play a sound file stored in the profile's media directory
---- [volume] of 75 (1 to 100)
playSoundFile(
    "C:/Users/Tamarindo/Documents/cow.wav" -- name
    , 75 -- volume
)

-- OR download once from the Internet, and play a sound stored in the profile's media directory
---- [volume] of 75
---- [loops] of 2 (-1 for indefinite repeats, 1+ for finite repeats)
---- [key] reference of "cow" for stopping this unique sound later
---- [tag] reference of "animals" to stop a group of sounds later with the same tag
---- [priority] of 25 (1 to 100, 50 default, a sound with a higher priority would stop this one)
---- [url] to download once from the Internet if the sound does not exist in the profile's media directory
playSoundFile(
    "cow.wav" -- name
    , 75 -- volume
    , nil -- fadein
    , nil -- fadeout
    , nil -- start
    , 2 -- loops
    , "cow" -- key 
    , "animals" -- tag
    , 25 -- priority
    , "https://raw.githubusercontent.com/StickMUD/StickMUDSounds/master/sounds/" -- url
    , nil -- finish
)

purgeMediaCache

purgeMediaCache(): Purge all media file stored in the media cache within a given Mudlet profile (media used with MCMP and MSP protocols). As game developers update the media files on their games, this enables the media folder inside the profile to be cleared so that the media files could be refreshed to the latest update(s).

Guidance

Instruct a player to type lua purgeMediaCache() on the command line, or
Distribute a trigger, button or other scriptable feature for the given profile to call purgeMediaCache()

receiveMSP

receiveMSP(command): Receives a well-formed Mud Sound Protocol (MSP) message to be processed by the Mudlet client. Reference the Supported Protocols MSP manual for more information on about what can be sent and example triggers.

registerAnonymousEventHandler

registerAnonymousEventHandler(event name, functionReference, [one shot]): Registers a function to an event handler, not requiring you to set one up via script. See here for a list of Mudlet-raised events. The function may be refered to either by name as a string containing a global function name, or with the lua function object itself.

The optional one shot parameter allows you to automatically kill an event handler after it is done by giving a true value. If the event you waited for did not occur yet, return true from the function to keep it registered.

The function returns an ID that can be used in killAnonymousEventHandler() to unregister the handler again.

If you use an asterisk ("*") as the event name, your code will capture all events. Useful for debugging, or integration with external programs.

Note: The ability to refer lua functions directly, the one shot parameter and the returned ID are features of Mudlet 3.5 and above.

Note: The "*" all-events capture was added in Mudlet 4.10.

See also: killAnonymousEventHandler(), raiseEvent(), list of Mudlet-raised events

Example

-- example taken from the God Wars 2 (http://godwars2.org) Mudlet UI - forces the window to keep to a certain size
function keepStaticSize()
  setMainWindowSize(1280,720)
end -- keepStaticSize

if keepStaticSizeEventHandlerID then killAnonymousEventHandler(keepStaticSizeEventHandlerID) end -- clean up any already registered handlers for this function
keepStatisSizeEventHandlerID = registerAnonymousEventHandler("sysWindowResizeEvent", "keepStaticSize") -- register the event handler and save the ID for later killing

-- simple inventory tracker for GMCP enabled games. This version does not leak any of the methods
-- or tables into the global namespace. If you want to access it, you should export the inventory
-- table via an own namespace.
local inventory = {}

local function inventoryAdd()
  if gmcp.Char.Items.Add.location == "inv" then
    inventory[#inventory + 1] = table.deepcopy(gmcp.Char.Items.Add.item)
  end
end
if inventoryAddHandlerID then killAnonymousEventHandler(inventoryAddHandlerID) end -- clean up any already registered handlers for this function
inventoryAddHandlerID = registerAnonymousEventHandler("gmcp.Char.Items.Add", inventoryAdd) -- register the event handler and save the ID for later killing

local function inventoryList()
  if gmcp.Char.Items.List.location == "inv" then
    inventory = table.deepcopy(gmcp.Char.Items.List.items)
  end
end
if inventoryListHandlerID then killAnonymousEventHandler(inventoryListHandlerID) end -- clean up any already registered handlers for this function
inventoryListHandlerID = registerAnonymousEventHandler("gmcp.Char.Items.List", inventoryList) -- register the event handler and save the ID for later killing

local function inventoryUpdate()
  if gmcp.Char.Items.Remove.location == "inv" then
    local found
    local updatedItem = gmcp.Char.Items.Update.item
    for index, item in ipairs(inventory) do
      if item.id == updatedItem.id then
        found = index
        break
      end
    end
    if found then
      inventory[found] = table.deepcopy(updatedItem)
    end
  end
end
if inventoryUpdateHandlerID then killAnonymousEventHandler(inventoryUpdateHandlerID) end -- clean up any already registered handlers for this function
inventoryUpdateHandlerID = registerAnonymousEventHandler("gmcp.Char.Items.Update", inventoryUpdate)

local function inventoryRemove()
  if gmcp.Char.Items.Remove.location == "inv" then
    local found
    local removedItem = gmcp.Char.Items.Remove.item
    for index, item in ipairs(inventory) do
      if item.id == removedItem.id then
        found = index
        break
      end
    end
    if found then
      table.remove(inventory, found)
    end
  end
end
if inventoryRemoveHandlerID then killAnonymousEventHandler(inventoryRemoveHandlerID) end -- clean up any already registered handlers for this function
inventoryRemoveHandlerID = registerAnonymousEventHandler("gmcp.Char.Items.Remove", inventoryRemove)

-- downloads a package from the internet and kills itself after it is installed.
local saveto = getMudletHomeDir().."/dark-theme-mudlet.zip"
local url = "http://www.mudlet.org/wp-content/files/dark-theme-mudlet.zip"

if myPackageInstallHandler then killAnonymousEventHandler(myPackageInstallHandler) end
myPackageInstallHandler = registerAnonymousEventHandler(
  "sysDownloadDone",
  function(_, filename)
    if filename ~= saveto then
      return true -- keep the event handler since this was not our file
    end
    installPackage(saveto)
    os.remove(b)
  end,
  true
)

downloadFile(saveto, url)
cecho("<white>Downloading <green>"..url.."<white> to <green>"..saveto.."\n")

registerNamedEventHandler

success = registerNamedEventHandler(userName, handlerName, eventName, functionReference, [oneShot])

Registers a named event handler with name handlerName. Named event handlers are protected from duplication and can be stopped and resumed, unlike anonymous event handlers. A separate list is kept per userName

See also: registerAnonymousEventHandler(), stopNamedEventHandler(), resumeNamedEventHandler(), deleteNamedEventHandler(), registerNamedTimer()

Available in Mudlet4.14+

Parameters

userName:

The user name the event handler was registered under.

handlerName:

The name of the handler. Used to reference the handler in other functions and prevent duplicates. Recommended you use descriptive names, "hp" is likely to collide with something else, "DemonVitals" less so.

eventName:

The name of the event the handler responds to. See here for a list of Mudlet-raised events.

functionReference:

The function reference to run when the event comes in. Can be the name of a function, "handlerFuncion", or the lua function itself.

oneShot:

(optional) if true, the event handler will only fire once when the event is raised. If you need to extend a one shot event handler for "one more check" you can have the handler return true, and it will keep firing until the function does not return true.

Returns

true if successful, otherwise errors.

Example

-- register a named event handler. Will call demonVitalsHandler(eventName, ...) when gmcp.Char.Vitals is raised.
local ok = registerNamedEventHandler("Demonnic", "DemonVitals", "gmcp.Char.Vitals", "demonVitalsHandler")
if ok then
  cecho("Vitals handler switched to demonVitalsHandler")
end

-- something changes later, and we want to handle vitals with another function, demonBlackoutHandler()
-- note we do not use "" around demonBlackoutHandler but instead pass the function itself. Both work.
-- using the same handlerName ("DemonVitals") means it will automatically unregister the old handler
-- and reregister it using the new information.
local ok = registerNamedEventHandler("Demonnic", "DemonVitals", "gmcp.Char.Vitals", demonBlackoutHandler)
if ok then
  cecho("Vitals handler switched to demonBlackoutHandler")
end

-- Now you want to check your inventory, but you only want to do it once, so you pass the optional oneShot as true
local function handleInv()
  local list = gmcp.Char.Items.List
  if list.location ~= "inventory" then
    return true -- if list.location is, say "room" then we need to keep responding until it's "inventory"
  end
  display(list.items) -- you would probably store values and update displays or something, but here I'll just show the data as it comes in
end

-- you can ignore the response from registerNamedEventHandler if you want, it's always going to be true
-- unless there is an error, in which case it throws the error and halts execution anyway. The return is
-- in part for feedback when using the lua alias or other REPL window.
registerNamedEventHandler("Demonnic", "DemonInvCheck", "gmcp.Char.Items.List", handleInv, true)

reloadModule

reloadModule(module name): Reload a module (by uninstalling and reinstalling).

Example

reloadModule("3k-mapper")

removeFileWatch

removeFileWatch(path): Remove file watch on directory or file. Every change in that file will no longer raise sysPathChanged event.

resetProfile

resetProfile()

Reloads your entire Mudlet profile - as if you've just opened it. All UI elements will be cleared, so this useful when you're coding your UI.

Example

resetProfile()

The function used to require input from the game to work, but as of Mudlet 3.20 that is no longer the case.

Note: Don't put resetProfile() in a script-item in the script editor as the script will be reloaded by resetProfile(), better to use the command line or alias.

Note: Developer tip: Make a keybinding for resetting your profile while you develop your GUI so you don't have to type lua resetProfile() command every time you want to see the changes (e.g. CTRL+SHIFT+R)

resumeNamedEventHandler

success = resumeNamedEventHandler(userName, handlerName)

Resumes a named event handler with name handlerName and causes it to start firing once more.

See also: registerNamedEventHandler(), stopNamedEventHandler()

Available in Mudlet4.14+

Parameters

userName:

The user name the event handler was registered under.

handlerName:

The name of the handler to resume. Same as used when you called registerNamedEventHandler()

Returns

true if successful, false if it didn't exist.

Example

local resumed = resumeNamedEventHandler("Demonnic", "DemonVitals")
if resumed then
  cecho("DemonVitals resumed!")
else
  cecho("DemonVitals doesn't exist, cannot resume it")
end

saveProfile

saveProfile(location)

Saves the current Mudlet profile to disk, which is equivalent to pressing the "Save Profile" button.

Parameters

location:

(optional) folder to save the profile to. If not given, the profile will go into the default location.

Example

saveProfile()

-- save to the desktop on Windows:
saveProfile([[C:\Users\yourusername\Desktop]])

sendSocket

sendSocket(data)

Sends given binary data as-is to the game. You can use this to implement support for a new telnet protocol, simultronics login or etcetera.

Example

TN_IAC = 255
TN_WILL = 251
TN_DO = 253
TN_SB = 250
TN_SE = 240
TN_MSDP = 69

MSDP_VAL = 1
MSDP_VAR = 2

sendSocket( string.char( TN_IAC, TN_DO, TN_MSDP ) ) -- sends IAC DO MSDP

--sends: IAC  SB MSDP MSDP_VAR "LIST" MSDP_VAL "COMMANDS" IAC SE
local msg = string.char( TN_IAC, TN_SB, TN_MSDP, MSDP_VAR ) .. " LIST " ..string.char( MSDP_VAL ) .. " COMMANDS " .. string.char( TN_IAC, TN_SE )
sendSocket( msg )

Note: Remember that should it be necessary to send the byte value of 255 as a data byte and not as the Telnet IAC value it is required to repeat it for Telnet to ignore it and not treat it as the latter.

setConfig

setConfig(option, value)

Sets a Mudlet option to a certain value. This comes in handy for scripts that want to customise Mudlet settings to their preferences - for example, setting up mapper room and exit size to one that works for a certain map, or enabling MSDP for a certain game. For transparency reasons, the Debug window (when open) will show which options were modified by scripts.

To set many options at once, pass in a table of options. More options will be added over time / per request.

See also: enableMapInfo(), disableMapInfo()

Available in Mudlet4.16+

Parameters

option:

Particular option to change - see list below for available ones.

value:

Value to set - can be a boolean, number, or text depending on the option.

General options
Option	Default	Description	Available in Mudlet
enableGMCP	true	Enable GMCP (Reconnect after changing)	4.16
enableMSDP	false	Enable MSDP (Reconnect after changing)	4.16
enableMSSP	true	Enable MSSP (Reconnect after changing)	4.16
enableMSP	true	Enable MSP (Reconnect after changing)	4.16
compactInputLine	false	Hide search, timestamp, other buttons and labels bottom-right of input line	4.17

Input line
Option	Default	Description	Available in Mudlet
inputLineStrictUnixEndings	false	Workaround option to use strict UNIX line endings for sending commands	4.16

Main display
Option	Default	Description	Available in Mudlet
fixUnnecessaryLinebreaks	false	Remove extra linebreaks from output (mostly for IRE servers)	4.16

Mapper options
Option	Default	Description	Available in Mudlet
mapRoomSize	5	Size of rooms on map (a good value is 5)	4.16
mapExitSize	10	Size of exits on map (a good value is 10)	4.16
mapRoundRooms	false	Draw rooms round or square	4.16
showRoomIdsOnMap	false	Show room IDs on all rooms (if zoom permits)	4.16
showMapInfo	-	Map overlay text ('Full', 'Short', or any custom made. Map can show multiple at once)	4.16
hideMapInfo	-	Map overlay text ('Full', 'Short', or any custom made. Hide each info separately to hide all)	4.16
show3dMapView	false	Show map as 3D	4.16
mapperPanelVisible	true	Map controls at the bottom	4.16
mapShowRoomBorders	true	Draw a thin border for every room	4.16

Special options
Option	Default	Description	Available in Mudlet
specialForceCompressionOff	false	Workaround option to disable MCCP compression, in case the game server is not working correctly	4.16
specialForceGAOff	false	Workaround option to disable Telnet Go-Ahead, in case the game server is not working correctly	4.16
specialForceCharsetNegotiationOff	false	Workaround option to disable automatically setting the correct encoding, in case the game server is not working correctly	4.16
specialForceMxpNegotiationOff	false	Workaround option to disable MXP, in case the game server is not working correctly	4.16
caretShortcut	"none"	For visually-impaired players - set the key to switch between input line and main window (can be "none", "tab", "ctrltab", "f6")	4.17
blankLinesBehaviour	"show"	For visually impaired players options for dealing with blank lines (can be "show", "hide", "replacewithspace")	4.17

Returns

true if successful, or nil+msg if the option doesn't exist. Setting mapper options requires the mapper being open first.

Example

setConfig("mapRoomSize", 5)

setConfig({mapRoomSize = 6, mapExitSize = 12})

setMergeTables

setMergeTables(module): Makes Mudlet merge the table of the given GMCP or MSDP module instead of overwriting the data. This is useful if the game sends only partial updates which need combining for the full data. By default "Char.Status" is the only merged module.

Parameters

module:

Name(s) of the GMCP or MSDP module(s) that should be merged as a string - this will add it to the existing list.

Example

setMergeTables("Char.Skills", "Char.Vitals")

setModuleInfo

setModuleInfo(moduleName, info, value)

Sets a specific meta info value for a module

Parameters

moduleName:

Name of the module

info:

specific info to set (for example "version")

value:

specific value to set (for example "1.0")

setModulePriority

setModulePriority(moduleName, priority)

Sets the module priority on a given module as a number - the module priority determines the order modules are loaded in, which can be helpful if you have ones dependent on each other. This can also be set from the module manager window.

Modules with priority -1 will be loaded before scripts (Mudlet 4.11+).

setPackageInfo

setPackageInfo(packageName, info, value)

Sets a specific meta info value for a package

Parameters

packageName:

Name of the module

info:

specific info to set (for example "version")

value:

specific value to set (for example "1.0")

setServerEncoding

setServerEncoding(encoding): Makes Mudlet use the specified encoding for communicating with the game.

Parameters

encoding:

Encoding to use.

Example

-- use UTF-8 if Mudlet knows it. Unfortunately there's no way to check if the game's server knows it too.
if table.contains(getServerEncodingsList(), "UTF-8") then
  setServerEncoding("UTF-8")
end

showNotification

showNotification(title, [content], [expiryTimeInSeconds])

Shows a native (system) notification.

Available in Mudlet4.11+

Note: This might not work on all systems, this depends on the system.

Parameters

title - plain text notification title
content - optional argument, plain text notification content, if omitted title argument will be used as content as well
expiryTimeInSeconds - optional argument, sets expiration time in seconds for notification, very often ignored by OS

showNotification("Notification title", "Notification content", 5)

spawn

spawn(readFunction, processToSpawn[, ...arguments])

Spawns a process and opens a communicatable link with it - read function is the function you'd like to use for reading output from the process, and t is a table containing functions specific to this connection - send(data), true/false = isRunning(), and close().

This allows you to setup RPC communication with another process.

Examples

-- simple example on a program that quits right away, but prints whatever it gets using the 'display' function
local f = spawn(display, "ls")
display(f.isRunning())
f.close()

local f = spawn(display, "ls", "-la")
display(f.isRunning())
f.close()

startLogging

startLogging(state)

Control logging of the main console text as text or HTML (as specified by the "Save log files in HTML format instead of plain text" setting on the "General" tab of the "Profile preferences" or "Settings" dialog). Despite being called startLogging it can also stop the process and correctly close the file being created. The file will have an extension of type ".txt" or ".html" as appropriate and the name will be in the form of a date/time "yyyy-MM-dd#hh-mm-ss" using the time/date of when logging started. Note that this control parallels the corresponding icon in the "bottom buttons" for the profile and that button can also start and stop the same logging process and will reflect the state as well.

Parameters

state:

Required: logging state. Passed as a boolean

Returns (4 values)

successful (bool)

true if the logging state actually changed; if, for instance, logging was already active and true was supplied then no change in logging state actually occurred and nil will be returned (and logging will continue).

message (string)

A displayable message given one of four messages depending on the current and previous logging states, this will include the file name except for the case when logging was not taking place and the supplied argument was also false.

fileName (string)

The log will be/is being written to the path/file name returned.

code (number)

A value indicating the response to the system to this instruction:

 *  0 = logging has just stopped
 *  1 = logging has just started
 * -1 = logging was already in progress so no change in logging state
 * -2 = logging was already not in progress so no change in logging state

Example

-- start logging
local success, message, filename, code = startLogging(true)
if code == 1 or code == -1 then print(f"Started logging to {filename}") end

-- stop logging
startLogging(false)

stopAllNamedEventHandlers

stopAllNamedEventHandlers(userName)

Stops all named event handlers and prevents them from firing any more. Information is retained and handlers can be resumed.

See also: registerNamedEventHandler(), stopNamedEventHandler(), resumeNamedEventHandler()

Available in Mudlet4.14+

Parameter

userName:

The user name the event handler was registered under.

Example

stopAllNamedEventHandlers() -- emergency stop situation, most likely.

stopMusic

stopMusic(settings table): Stop all music (no filter), or music that meets a combination of filters (name, key, and tag) intended to be paired with playMusicFile().

Required	Key	Value	Default	Purpose
No	name	<file name>		Name of the media file.
No	key	<key>		Uniquely identifies media files with a "key" that is bound to their "name" or "url". Halts the play of current media files with the same "key" that have a different "name" or "url" while this media plays.
No	tag	<tag>		Helps categorize media.
No	fadeaway	true or false	false	Decrease volume from the current position for a given duration, then stops the track. Given duration is the lesser of the remaining track duration or the fadeout specified in playMusicFile(). If fadeout was not specified in playMusicFile(), then the optional fadeout parameter from stopMusic() or a default of 5000 milliseconds will be applied.
No	fadeout		5000	Default duration in milliseconds to decrease volume to the end of the track. Only used if fadeout was not defined in playMusicFile().

Available in Mudlet4.15+

Example

---- Table Parameter Syntax ----

-- Stop all playing music files for this profile associated with the API
stopMusic()

-- Stop playing the rugby mp3 by name
stopMusic({name = "167124__patricia-mcmillen__rugby-club-in-spain.mp3"})

-- Stop playing the unique sound identified as "rugby"
stopMusic({
    name = nil  -- nil lines are optional, no need to use
    , key = "rugby" -- key
    , tag = nil  -- nil lines are optional, no need to use
})

-- Decrease volume for 5 seconds and then stop all playing music files for this profile associated with the API
stopMusic({
    fadeaway = true
})

-- Decrease volume for 10 seconds (or apply the duration of fadeout set in playMusicFile()) and then stop all playing music files for this profile associated with the API
stopMusic({
    fadeaway = true
    , fadeout = 10000
})

-- Decrease volume for 5 seconds and then stop all the unique "rugby" music for this profile associated with the API
stopMusic({
    key = "rugby"
    , fadeaway = true
})

---- Ordered Parameter Syntax of stopMusic([name][,key][,tag][,fadeaway][,fadeout]) ----

-- Stop all playing music files for this profile associated with the API
stopMusic()

-- Stop playing the rugby mp3 by name
stopMusic("167124__patricia-mcmillen__rugby-club-in-spain.mp3")

-- Stop playing the unique sound identified as "rugby"
stopMusic(
    nil -- name
    , "rugby" -- key
    , nil -- tag
)

-- Decrease the volume for 10 seconds then stop playing the unique sound identified as "rugby"
stopMusic(
    nil -- name
    , "rugby" -- key
    , nil -- tag
    , true -- fadeaway
    , 10000 -- fadeout
)

stopNamedEventHandler

success = stopNamedEventHandler(userName, handlerName)

Stops a named event handler with name handlerName and prevents it from firing any more. Information is stored so it can be resumed later if desired.

See also: registerNamedEventHandler(), resumeNamedEventHandler()

Available in Mudlet4.14+

Parameters

userName:

The user name the event handler was registered under.

handlerName:

The name of the handler to stop. Same as used when you called registerNamedEventHandler()

Returns

true if successful, false if it didn't exist or was already stopped

Example

local stopped = stopNamedEventHandler("DemonVitals")
if stopped then
  cecho("DemonVitals stopped!")
else
  cecho("DemonVitals doesn't exist or already stopped; either way it won't fire any more.")
end

stopSounds

stopSounds(settings table): Stop all sounds (no filter), or sounds that meets a combination of filters (name, key, tag, and priority) intended to be paired with playSoundFile().

Required	Key	Value	Default	Purpose
No	name	<file name>		Name of the media file.
No	key	<key>		Uniquely identifies media files with a "key" that is bound to their "name" or "url". Halts the play of current media files with the same "key" that have a different "name" or "url" while this media plays.
No	tag	<tag>		Helps categorize media.
No	priority	1 to 100		Halts the play of current or future played media files with a matching or lower priority.
No	fadeaway	true or false	false	Decrease volume from the current position for a given duration, then stops the track. Given duration is the lesser of the remaining track duration or the fadeout specified in playSoundFile(). If fadeout was not specified in playSoundFile(), then the optional fadeout parameter from stopSounds() or a default of 5000 milliseconds will be applied.
No	fadeout		5000	Default duration in milliseconds to decrease volume to the end of the track. Only used if fadeout was not defined in playSoundFile().

Available in Mudlet4.15+

Example

---- Table Parameter Syntax ----

-- Stop all playing sound files for this profile associated with the API
stopSounds()

-- Stop playing the cow sound
stopSounds({name = "cow.wav"})

-- Stop playing any sounds tagged as "animals" with a priority less than or equal to 50
---- This would not stop sounds tagged as "animals" greater than priority 50.  This is an "AND" and not an "OR".
stopSounds({
    name = nil -- nil lines are optional, no need to use
    , key = nil -- nil lines are optional, no need to use
    , tag = "animals"
    , priority = 50
})

-- Decrease volume for 5 seconds and then stop all playing sound files for this profile associated with the API
stopSounds({
    fadeaway = true
})

-- Decrease volume for 10 seconds (or apply the duration of fadeout set in playSoundFile()) and then stop all playing music files for this profile associated with the API
stopSounds({
    fadeaway = true
    , fadeout = 10000
})

-- Decrease volume for 3 seconds and then stop all the tagged "animals" music for this profile associated with the API
stopSounds({
    tag = "animals"
    , fadeaway = true
    , fadeout = 3000
})

---- Ordered Parameter Syntax of stopSounds([name][,key][,tag][,priority][,fadeaway][,fadeout]) ----

-- Stop all playing sound files for this profile associated with the API
stopSounds()

-- Stop playing the cow sound
stopSounds("cow.wav")

-- Stop playing any sounds tagged as "animals" with a priority less than or equal to 50
---- This would not stop sounds tagged as "animals" greater than priority 50.  This is an "AND" and not an "OR".
stopSounds(
    nil -- name
    , nil -- key
    , "animals" -- tag
    , 50 -- priority
)

-- Decrease the volume for 7 seconds and then stop playing sounds
stopSounds(
    nil -- name
    , nil -- key
    , nil -- tag
    , nil -- priority
    , true -- fadeaway
    , 7000 -- fadeout
)

timeframe

timeframe(vname, true_time, nil_time, ...)

A utility function that helps you change and track variable states without using a lot of tempTimers.

Available in Mudlet3.6+

Parameters

vname:

A string or function to use as the variable placeholder.

true_time:

Time before setting the variable to true. Can be a number or a table in the format: {time, value}

nil_time:

(optional) Number of seconds until vname is set back to nil. Leaving it undefined will leave it at whatever it was set to last. Can be a number of a table in the format: {time, value}

...:

(optional) Further list of times and values to set the variable to, in the following format: {time, value}

Example

-- sets the global 'limiter' variable to true immediately (see the 0) and back to nil in one second (that's the 1).
timeframe("limiter", 0, 1)

-- An angry variable 'giant' immediately set to "fee", followed every second after by "fi", "fo", and "fum" before being reset to nil at four seconds.
timeframe("giant", {0, "fee"}, 4, {1, "fi"}, {2, "fo"}, {3, "fum"})

-- sets the local 'width' variable to true immediately and back to nil in one second.
local width
timeframe(function(value) width = value end, 0, 1)

translateTable

translateTable(directions, [languagecode])

Given a table of directions (such as speedWalkDir), translates directions to another language for you. Right now, it can only translate it into the language of Mudlet's user interface - but let us know if you need more.

Available in Mudlet3.22+

Parameters

directions:

An indexed table of directions (eg. {"sw", "w", "nw", "s"}).

languagecode:

(optional) Language code (eg ru_RU or it_IT) - by default, mudlet.translations.interfacelanguage is used.

Example

-- get the path from room 2 to room 5 and translate directions
if getPath(2, 5) then
speedWalkDir = translateTable(speedWalkDir)
print("Translated directions:")
display(speedWalkDir)

uninstallModule

uninstallModule(name)

Uninstalls a Mudlet module with the given name.

Example

uninstallModule("myalias")

uninstallPackage

uninstallPackage(name)

Uninstalls a Mudlet package with the given name.

unzipAsync

unzipAsync(path, location)

Unzips the zip file at path, extracting the contents to the location provided. Returns true if it is able to start unzipping, or nil+message if it cannot.

Raises the sysUnzipDone event with the zip file location and location unzipped to as arguments if unzipping is successful, and sysUnzipError with the same arguments if it is not.

Do not use the unzip() function as it is synchronous and will impact Mudlet's performance (ie, freeze Mudlet while unzipping).

Available in Mudlet4.6+

Example

function handleUnzipEvents(event, ...)
  local args = {...}
  local zipName = args[1]
  local unzipLocation = args[2]
  if event == "sysUnzipDone" then
    cecho(string.format("<green>Unzip successful! Unzipped %s to %s\n", zipName, unzipLocation))
  elseif event == "sysUnzipError" then
    cecho(string.format("<firebrick>Unzip failed! Tried to unzip %s to %s\n", zipName, unzipLocation))
  end
end
if unzipSuccessHandler then killAnonymousEventHandler(unzipSuccessHandler) end
if unzipFailureHandler then killAnonymousEventHandler(unzipFailureHandler) end
unzipSuccessHandler = registerAnonymousEventHandler("sysUnzipDone", "handleUnzipEvents")
unzipFailureHandler = registerAnonymousEventHandler("sysUnzipError", "handleUnzipEvents")
--use the path to your zip file for this, not mine
local zipFileLocation = "/home/demonnic/Downloads/Junkyard_Orc.zip" 
--directory to unzip to, it does not need to exist but you do need to be able to create it
local unzipLocation = "/home/demonnic/Downloads/Junkyard_Orcs" 
unzipAsync(zipFileLocation, unzipLocation) -- this will work
unzipAsync(zipFileLocation .. "s", unzipLocation) --demonstrate error, will happen first because unzipping takes time

yajl.to_string

yajl.to_string(data)

Encodes a Lua table into JSON data and returns it as a string. This function is very efficient - if you need to encode into JSON, use this.

Example

-- on IRE MUD games, you can send a GMCP request to request the skills in a particular skillset. Here's an example:
sendGMCP("Char.Skills.Get "..yajl.to_string{group = "combat"})

-- you can also use it to convert a Lua table into a string, so you can, for example, store it as room's userdata
local toserialize = yajl.to_string(continents)
setRoomUserData(1, "areaContinents", toserialize)

yajl.to_value

yajl.to_value(data)

Decodes JSON data (as a string) into a Lua table. This function is very efficient - if you need to dencode into JSON, use this.

Example

-- given the serialization example above with yajl.to_string, you can deserialize room userdata back into a table
local tmp = getRoomUserData(1, "areaContinents")
if tmp == "" then return end

local continents = yajl.to_value(tmp)
display(continents)

Mudlet Object Functions

Collection of functions to manipulate Mudlet's scripting objects - triggers, aliases, and so forth.

addCmdLineSuggestion

addCmdLineSuggestion([name], suggestion): Add suggestion for tab completion for specified command line.

For example, start typing he and hit TAB until help appears in command line.

Non-word characters are skipped (this is the reason why they can't be added at start of suggestion), therefore it's also possible to type: /he and hit TAB.

Available in Mudlet4.11+

Parameters

name: optional command line name, if skipped main command line will be used
suggestion - suggestion as a single word to add to tab completion (only the following are allowed: 0-9A-Za-z_)

Example:

addCmdLineSuggestion("help")

local suggestions = {"Pneumonoultramicroscopicsilicovolcanoconiosis", "supercalifragilisticexpialidocious", "serendipitous"}
for _, suggestion in ipairs(suggestions) do
  addCmdLineSuggestion(suggestion)
end

adjustStopWatch

adjustStopWatch(watchID/watchName, amount): Adjusts the elapsed time on the stopwatch forward or backwards by the amount of time. It will work even on stopwatches that are not running, and thus can be used to preset a newly created stopwatch with a negative amount so that it runs down from a negative time towards zero at the preset time.

Parameters

watchID (number) / watchName (string): The stopwatch ID you get with createStopWatch() or the name given to that function or later set with setStopWatchName().
amount (decimal number): An amount in seconds to adjust the stopwatch by, positive amounts increase the recorded elapsed time.

Returns

true on success if the stopwatch was found and thus adjusted, or nil and an error message if not.

Example

-- demo of a persistent stopWatch used to real time a mission
-- called with a positive number of seconds it will start a "missionStopWatch"
-- unless there already is one in which case it will instead report on
-- the deadline. use 'stopStopWatch("missionStopWatch")' when the mission
-- is done and 'deleteStopWatch("missionStopWatch")' when the existing mission
-- is to be disposed of. Until then repeated use of 'mission(interval)' will
-- just give updates...
function mission(time)
  local missionTimeTable = missionTimeTable or {}

  if createStopWatch("missionStopWatch") then
    adjustStopWatch("missionStopWatch", -tonumber(time))
    setStopWatchPersistence("missionStopWatch", true)
    missionTimeTable = getStopWatchBrokenDownTime("missionStopWatch")

    echo(string.format("Get cracking, you have %02i:%02i:%02i hg:m:s left.\n", missionTimeTable.hours, missionTimeTable.minutes, missionTimeTable.seconds))
    startStopWatch("missionStopWatch")
  else
    -- it already exists, so instead report what is/was the time on it
    --[=[ We know that the stop watch exists - we just need to find the ID
      so we can get the running detail which is only available from the getStopWatches()
      table and that is indexed by ID]=]
    for k,v in pairs(getStopWatches()) do
      if v.name == "missionStopWatch" then
        missionTimeTable = v
      end
    end
    if missionTimeTable.isRunning then
      if missionTimeTable.elapsedTime.negative then
        echo(string.format("Better hurry up, the clock is ticking on an existing mission and you only have %02i:%02i:%02i h:m:s left.\n", missionTimeTable.elapsedTime.hours, missionTimeTable.elapsedTime.minutes, missionTimeTable.elapsedTime.seconds))
      else
        echo(string.format("Bad news, you are past the deadline on an existing mission by %02i:%02i:%02i h:m:s !\n", missionTimeTable.elapsedTime.hours, missionTimeTable.elapsedTime.minutes, missionTimeTable.elapsedTime.seconds))
      end
    else
      if missionTimeTable.elapsedTime.negative then
        echo(string.format("Well done! You have already completed a mission %02i:%02i:%02i h:m:s before the deadline ...\n", missionTimeTable.elapsedTime.hours, missionTimeTable.elapsedTime.minutes, missionTimeTable.elapsedTime.seconds))
      else
        echo(string.format("Uh oh! You failed to meet the deadline on an existing mission by %02i:%02i:%02i h:m:s !\n", missionTimeTable.elapsedTime.hours, missionTimeTable.elapsedTime.minutes, missionTimeTable.elapsedTime.seconds))
      end
    end
  end
end


-- in use:
lua mission(60*60)
Get cracking, you have 01:00:00 h:m:s left.

lua mission(60*60)
Better hurry up, the clock is ticking on an existing mission and you only have 00:59:52 h:m:s left.

Available in Mudlet4.4+

appendScript

appendScript(scriptName, luaCode, [occurrence]): Appends Lua code to the script "scriptName". If no occurrence given it sets the code of the first found script.

Returns

a unique id number for that script.

Parameters

scriptName: name of the script
luaCode: scripts luaCode to append
occurence: (optional) the occurrence of the script in case you have many with the same name

Example

-- an example of appending the script lua code to the first occurrence of "testscript"
appendScript("testscript", [[echo("This is a test\n")]], 1)

Available in Mudlet4.8+

appendCmdLine

appendCmdLine([name], text): Appends text to the main input line.; See also: printCmdLine(), clearCmdLine()

Parameters

name: (optional) name of the command line. If not given, the text will be appended to the main commandline.
text: text to append

Example

-- adds the text "55 backpacks" to whatever is currently in the input line
appendCmdLine("55 backpacks")

-- makes a link, that when clicked, will add "55 backpacks" to the input line
echoLink("press me", "appendCmdLine'55 backpack'", "Press me!")

clearCmdLine

clearCmdLine([name]): Clears the input line of any text that's been entered.; See also: printCmdLine()

Parameters

name: (optional) name of the command line. If not given, the main commandline's text will be cleared.

Example

-- don't be evil with this!
clearCmdLine()

clearCmdLineSuggestions

clearCmdLineSuggestions([name])

Clears all suggestions for command line.

Parameter

name: (optional) name of the command line. If not given the main commandline's suggestions will be cleared.

clearCmdLineSuggestions()

createStopWatch

createStopWatch([name], [start immediately])
createStopWatch([start immediately])

Before Mudlet 4.4.0:

createStopWatch()

This function creates a stopwatch, a high resolution time measurement tool. Stopwatches can be started, stopped, reset, asked how much time has passed since the stop watch has been started and, following an update for Mudlet 4.4.0: be adjusted, given a name and be made persistent between sessions (so can time real-life things). Prior to 4.4.0 the function took no parameters and the stopwatch would start automatically when it was created.

Parameters

start immediately (bool) used to override the behaviour prior to Mudlet 4.4.0 so that if it is the only argument then a false value will cause the stopwatch to be created but be in a stopped state, however if a name parameter is provided then this behaviour is assumed and then a true value is required should it be desired for the stopwatch to be started on creation. This difference between the cases with and without a name argument is to allow for older scripts to continue to work with 4.4.0 or later versions of Mudlet without change, yet to allow for more functionality - such as presetting a time when the stopwatch is created but not to start it counting down until some time afterwards - to be performed as well with a named stopwatch.

name (string) a unique text to use to identify the stopwatch.

Returns

the ID (number) of a stopwatch; or, from 4.4.0: a nil + error message if the name has already been used.

Example: (Prior to Mudlet 4.4.0) in a global script you can create all stop watches that you need in your system and store the respective stopWatch-IDs in global variables:

fightStopWatch = fightStopWatch or createStopWatch() -- create, or re-use a stopwatch, and store the watchID in a global variable to access it from anywhere

-- then you can start the stop watch in some trigger/alias/script with:
startStopWatch(fightStopWatch)

-- to stop the watch and measure its time in e.g. a trigger script you can write:
fightTime = stopStopWatch(fightStopWatch)
echo("The fight lasted for " .. fightTime .. " seconds.")
resetStopWatch(fightStopWatch)

(From Mudlet 4.4.0) in a global script you can create all stop watches that you need in your system with unique names:

createStopWatch("fightStopWatch") -- creates the stopwatch or returns nil+msg if it already exists

-- then you can start the stop watch (if it is not already started) in some trigger/alias/script with:
startStopWatch("fightStopWatch")

-- to stop the watch and measure its time in e.g. a trigger script you can write:
fightTime = stopStopWatch("fightStopWatch")
echo("The fight lasted for " .. fightTime .. " seconds.")
resetStopWatch("fightStopWatch")

You can also measure the elapsed time without having to stop the stop watch (equivalent to getting a lap-time) with getStopWatchTime().

Note: it's best to re-use stopwatch IDs if you can for Mudlet prior to 4.4.0 as they cannot be deleted, so creating more and more would use more memory. From 4.4.0 the revised internal design has been changed such that there are no internal timers created for each stopwatch - instead either a timestamp or a fixed elapsed time record is used depending on whether the stopwatches is running or stopped so that there are no "moving parts" in the later design and less resources are used - and they can be removed if no longer required.

deleteAllNamedTimers

deleteAllNamedTimers(userName)

Deletes all named timers and prevents them from firing any more. Information is deleted and cannot be retrieved.

See also: registerNamedTimer(), stopNamedTimer()

Available in Mudlet4.14+

Parameters

userName:

The user name the event handler was registered under.

Example

deleteAllNamedTimers("Demonnic") -- emergency stop or debugging situation, most likely.

deleteNamedTimer

success = deleteNamedTimer(userName, handlerName)

Deletes a named timer with name handlerName and prevents it from firing any more. Information is deleted and cannot be retrieved.

See also: registerNamedTimer(), stopNamedTimer()

Available in Mudlet4.14+

Parameters

userName:

The user name the event handler was registered under.

handlerName:

The name of the handler to stop. Same as used when you called registerNamedTimer()

Returns

true if successful, false if it didn't exist

Example

local deleted = deleteNamedTimer("Demonnic", "DemonVitals")
if deleted then
  cecho("DemonVitals deleted forever!!")
else
  cecho("DemonVitals doesn't exist and so could not be deleted.")
end

deleteStopWatch

deleteStopWatch(watchID/watchName)

This function removes an existing stopwatch, whether it only exists for this session or is set to be otherwise saved between sessions by using setStopWatchPersistence() with a true argument.

Parameters

watchID (number) / watchName (string): The stopwatch ID you get with createStopWatch() or the name given to that function or later set with setStopWatchName().

Returns

true if the stopwatch was found and thus deleted, or nil and an error message if not - obviously using it twice with the same argument will fail the second time unless another one with the same name or ID was recreated before the second use. Note that an empty string as a name will find the lowest ID numbered unnamed stopwatch and that will then find the next lowest ID number of unnamed ones until there are none left, if used repetitively!

lua MyStopWatch = createStopWatch("stopwatch_mine")
true

lua display(MyStopWatch)
4

lua deleteStopWatch(MyStopWatch)
true

lua deleteStopWatch(MyStopWatch)
nil

"stopwatch with id 4 not found"

lua deleteStopWatch("stopwatch_mine")
nil

"stopwatch with name "stopwatch_mine" not found"

removeCmdLineSuggestion

removeCmdLineSuggestion([name], suggestion): Remove a suggestion for tab completion for specified command line.

Available in Mudlet4.11+

Parameters

name: optional command line name, if skipped main command line will be used
suggestion - text to add to tab completion, non words characters at start and end of word should not be used (all characters except: `0-9A-Za-z_`)

Example:

removeCmdLineSuggestion("help")

disableAlias

disableAlias(name): Disables/deactivates the alias by its name. If several aliases have this name, they'll all be disabled. If you disable an alias group, all the aliases inside the group will be disabled as well.

Parameters

name:

The name of the alias. Passed as a string.

Examples

--Disables the alias called 'my alias'
disableAlias("my alias")

disableKey

disableKey(name): Disables key a key (macro) or a key group. When you disable a key group, all keys within the group will be implicitly disabled as well.

disableScript

disableScript(name): Disables a script that was previously enabled. Note that disabling a script only stops it from running in the future - it won't "undo" anything the script has made, such as labels on the screen.

Parameters

name: name of the script.

Example

--Disables the script called 'my script'
disableScript("my script")

Available in Mudlet4.8+

disableTimer

disableTimer(name): Disables a timer from running it’s script when it fires - so the timer cycles will still be happening, just no action on them. If you’d like to permanently delete it, use killTrigger instead.

Parameters

name:

Expects the timer ID that was returned by tempTimer on creation of the timer or the name of the timer in case of a GUI timer.

Example

--Disables the timer called 'my timer'
disableTimer("my timer")

disableTrigger

disableTrigger(name): Disables a permanent (one in the trigger editor) or a temporary trigger. When you disable a group, all triggers inside the group are disabled as well

Parameters

name:

Expects the trigger ID that was returned by tempTrigger or other temp*Trigger variants, or the name of the trigger in case of a GUI trigger.

Example

-- Disables the trigger called 'my trigger'
disableTrigger("my trigger")

enableAlias

enableAlias(name): Enables/activates the alias by it’s name. If several aliases have this name, they’ll all be enabled.

enableKey

enableKey(name): Enables a key (macro) or a group of keys (and thus all keys within it that aren't explicitly deactivated).

Parameters

name:

The name of the group that identifies the key.

-- you could use this to disable one key set for the numpad and activate another
disableKey("fighting keys")
enableKey("walking keys")

Note:' From Version 3.10 returns true if one or more keys or groups of keys were found that matched the name given or false if not; prior to then it returns true if there were any keys - whether they matched the name or not!

enableScript

enableScript(name): Enables / activates a script that was previously disabled.

Parameters

name: name of the script.

-- enable the script called 'my script' that you created in Mudlet's script section
enableScript("my script")

Available in Mudlet4.8+

enableTimer

enableTimer(name): Enables or activates a timer that was previously disabled.

Parameters

name:

Expects the timer ID that was returned by tempTimer on creation of the timer or the name of the timer in case of a GUI timer.

-- enable the timer called 'my timer' that you created in Mudlets timers section
enableTimer("my timer")

-- or disable & enable a tempTimer you've made
timerID = tempTimer(10, [[echo("hi!")]])

-- it won't go off now
disableTimer(timerID)
-- it will continue going off again
enableTimer(timerID)

enableTrigger

enableTrigger(name): Enables or activates a trigger that was previously disabled.

Parameters

name:

Expects the trigger ID that was returned by tempTrigger or by any other temp*Trigger variants, or the name of the trigger in case of a GUI trigger.

-- enable the trigger called 'my trigger' that you created in Mudlets triggers section
enableTrigger("my trigger")

-- or disable & enable a tempTrigger you've made
triggerID = tempTrigger("some text that will match in a line", [[echo("hi!")]])

-- it won't go off now when a line with matching text comes by
disableTrigger(triggerID)

-- and now it will continue going off again
enableTrigger(triggerID)

exists

exists(name/IDnumber, type): Returns the number of things with the given name or number of the given type - and 0 if none are present. Beware that all numbers are true in Lua, including zero.

Parameters

name:

The name (as a string) or, from Mudlet 4.17.0, the ID number of a single item, (which will be that returned by a temp* or perm* function to create such an item to identify the item).

type:

The type can be 'alias', 'button' (Mudlet 4.10+), 'trigger', 'timer', 'keybind' (Mudlet 3.2+), or 'script' (Mudlet 3.17+).

getButtonState

getButtonState([ButtonNameOrID]): This function can be used within checkbox button scripts (2-state buttons) to determine the current state of the checkbox.

getCmdLine

getCmdLine([name]): Returns the current content of the given command line.; See also: printCmdLine()

Available in Mudlet3.1+

Parameters

name: (optional) name of the command line. If not given, it returns the text of the main commandline.

Example

-- replaces whatever is currently in the input line by "55 backpacks"
printCmdLine("55 backpacks")

--prints the text "55 backpacks" to the main console
echo(getCmdLine())

getConsoleBufferSize

local lineLimit, sizeOfBatchDeletion = getConsoleBufferSize([consoleName]): Returns, on success, the maximum number of lines a buffer (main window or a miniconsole) can hold and how many will be removed at a time when that limit is exceeded; returns a nil and an error message on failure.; See also: setConsoleBufferSize()

Parameters

consoleName:

(optional) The name of the window. If omitted, uses the main console.
Example

-- sets the main window's size and how many lines will be deleted
-- when it gets to that size to be as small as possible:
setConsoleBufferSize("main", 1, 1)
true

-- find out what the numbers are:
local lineLimit, sizeOfBatchDeletion = getConsoleBufferSize()
echo("\nWhen the main console gets to " .. lineLimit .. " lines long, the first " .. sizeOfBatchDeletion .. " lines will be removed.\n")
When the main console gets to 100 lines long, the first 1 lines will be removed.

Available in Mudlet4.17+

getNamedTimers

timers = getNamedTimers(userName)

Returns a list of all the named timers' names as a table.

See also: registerNamedTimer()

Available in Mudlet4.14+

Parameters

userName:

The user name the event handler was registered under.

Returns

a table of handler names. { "DemonVitals", "DemonInv" } for example. {} if none are registered

Example

  local timers = getNamedTimers("Demonnic")
  display(timers)
  -- {}
  registerNamedTimer("Test1", "testEvent", "testFunction")
  registerNamedTimer("Test2", "someOtherEvent", myHandlerFunction)
  timers = getNamedTimers("Demonnic")
  display(timers)
  -- { "Test1", "Test2" }

getProfileStats

getProfileStats()

Returns a table with profile statistics for how many triggers, patterns within them, aliases, keys, timers, and scripts the profile has. Similar to the Statistics button in the script editor, accessible to Lua scripting.

Available in Mudlet4.15+

Example

-- show all stats
display(getProfileStats())

-- check how many active triggers there are
activetriggers = getProfileStats().triggers.active
cecho(f"<PaleGreen>We have <SlateGrey>{activetriggers}<PaleGreen> active triggers!\n")

-- triggers can have many patterns, so let's check that as well
patterns = getProfileStats().triggers.patterns.active
triggers = getProfileStats().triggers.active
cecho(f"<PaleGreen>We have <SlateGrey>{patterns}<PaleGreen> active patterns within <SlateGrey>{triggers}<PaleGreen> triggers!\n")

getStopWatches

table = getStopWatches()

Returns a table of the details for each stopwatch in existence, the keys are the watch IDs but since there can be gaps in the ID number allocated for the stopwatches it will be necessary to use the pairs(...) rather than the ipairs(...) method to iterate through all of them in for loops!

Each stopwatch's details will list the following items: name (string), isRunning (boolean), isPersistent (boolean), elapsedTime (table). The last of these contains the same data as is returned by the results table from the getStopWatchBrokenDownTime() function - namely days (positive integer), hours (integer, 0 to 23), minutes (integer, 0 to 59), second (integer, 0 to 59), milliSeconds (integer, 0 to 999), negative (boolean) with an additional decimalSeconds (number of seconds, with a decimal portion for the milli-seconds and possibly a negative sign, representing the whole elapsed time recorded on the stopwatch) - as would also be returned by the getStopWatchTime() function.

Example

-- on the command line:
lua getStopWatches()
-- could return something like:
{
  {
    isPersistent = true,
    elapsedTime = {
      minutes = 15,
      seconds = 2,
      negative = false,
      milliSeconds = 66,
      hours = 0,
      days = 18,
      decimalSeconds = 1556102.066
    },
    name = "Playing time",
    isRunning = true
  },
  {
    isPersistent = true,
    elapsedTime = {
      minutes = 47,
      seconds = 1,
      negative = true,
      milliSeconds = 657,
      hours = 23,
      days = 2,
      decimalSeconds = -258421.657
    },
    name = "TMC Vote",
    isRunning = true
  },
  {
    isPersistent = false,
    elapsedTime = {
      minutes = 26,
      seconds = 36,
      negative = false,
      milliSeconds = 899,
      hours = 3,
      days = 0,
      decimalSeconds = 12396.899
    },
    name = "",
    isRunning = false
  },
  [5] = {
    isPersistent = false,
    elapsedTime = {
      minutes = 0,
      seconds = 38,
      negative = false,
      milliSeconds = 763,
      hours = 0,
      days = 0,
      decimalSeconds = 38.763
    },
    name = "",
    isRunning = true
  }
}

Available in Mudlet4.4+

getStopWatchTime

time = getStopWatchTime(watchID [or watchName from Mudlet 4.4.0]): Returns the time as a decimal number of seconds with up to three decimal places to give a milli-seconds (thousandths of a second) resolution.; Please note that, prior to 4.4.0 it was not possible to retrieve the elapsed time after the stopwatch had been stopped, retrieving the time was not possible as the returned value then was an indeterminate, meaningless time; from the 4.4.0 release, however, the elapsed value can be retrieved at any time, even if the stopwatch has not been started since creation or modified with the adjustStopWatch() function introduced in that release.

Returns a number

Parameters

watchID

The ID number of the watch.

Example

-- an example of showing the time left on the stopwatch
teststopwatch = teststopwatch or createStopWatch()
startStopWatch(teststopwatch)
echo("Time on stopwatch: "..getStopWatchTime(teststopwatch))
tempTimer(1, [[echo("Time on stopwatch: "..getStopWatchTime(teststopwatch))]])
tempTimer(2, [[echo("Time on stopwatch: "..getStopWatchTime(teststopwatch))]])
stopStopWatch(teststopwatch)

getStopWatchBrokenDownTime

brokenDownTimeTable = getStopWatchBrokenDownTime(watchID or watchName): Returns the current stopwatch time, whether the stopwatch is running or is stopped, as a table, broken down into:

"days" (integer)
"hours" (integer, 0 to 23)
"minutes" (integer, 0 to 59)
"seconds" (integer, 0 to 59)
"milliSeconds" (integer, 0 to 999)
"negative" (boolean, true if value is less than zero)

Parameters

watchID / watchName

The ID number or the name of the watch.

Example

--an example, showing the presetting of a stopwatch.

--This will fail if the stopwatch with the given name
-- already exists, but then we can use the existing one:
local watchId = createStopWatch("TopMudSiteVoteStopWatch")
if watchId ~= nil then
  -- so we have just created the stopwatch, we want it
  -- to be saved for future sessions:
  setStopWatchPersistence("TopMudSiteVoteStopWatch", true)
  -- and set it to count down the 12 hours until we can
  -- revote:
  adjustStopWatch("TopMudSiteVoteStopWatch", -60*60*12)
  -- and start it running
  startStopWatch("TopMudSiteVoteStopWatch")

  openWebPage("http://www.topmudsites.com/vote-wotmud.html")
end

--[[ now I can check when it is time to vote again, even when
I stop the session and restart later by running the following
from a perm timer - perhaps on a 15 minute interval. Note that
when loaded in a new session the Id it gets is unlikely to be
the same as that when it was created - but that is not a
problem as the name is preserved and, if the timer is running
when the profile is saved at the end of the session then the
elapsed time will continue to increase to reflect the real-life
passage of time:]]

local voteTimeTable = getStopWatchBrokenDownTime("TopMudSiteVoteStopWatch")

if voteTimeTable["negative"] then
  if voteTimeTable["hours"] == 0 and voteTimeTable["minutes"] < 30 then
    echo("Voting for WotMUD on Top Mud Site in " .. voteTimeTable["minutes"] .. " minutes...")
  end
else
  echo("Oooh, it is " .. voteTimeTable["days"] .. " days, " .. voteTimeTable["hours"] .. " hours and " .. voteTimeTable["minutes"] .. " minutes past the time to Vote on Top Mud Site - doing it now!")
  openWebPage("http://www.topmudsites.com/vote-wotmud.html")
  resetStopWatch("TopMudSiteVoteStopWatch")
  adjustStopWatch("TopMudSiteVoteStopWatch", -60*60*12)
end

Available in Mudlet4.7+

getScript

getScript(scriptName, [occurrence]): Returns the script with the given name. If you have more than one script with the same name, specify the occurrence to pick a different one. Returns -1 if the script doesn't exist.

Parameters

scriptName: name of the script.
occurrence: (optional) occurence of the script in case you have many with the same name.

Example

-- show the "New script" on screen
print(getScript("New script"))

-- an example of returning the script Lua code from the second occurrence of "testscript"
test_script_code = getScript("testscript", 2)

Available in Mudlet4.8+

invokeFileDialog

invokeFileDialog(fileOrFolder, dialogTitle): Opens a file chooser dialog, allowing the user to select a file or a folder visually. The function returns the selected path or "" if there was none chosen.

Parameters

fileOrFolder: true for file selection, false for folder selection.
dialogTitle: what to say in the window title.

Examples

function whereisit()
  local path = invokeFileDialog(false, "Where should we save the file? Select a folder and click Open")

  if path == "" then return nil else return path end
end

isActive

isActive(name/IDnumber, type): You can use this function to check if something, or somethings, are active.; Returns the number of active things - and 0 if none are active. Beware that all numbers are true in Lua, including zero.

Parameters

name:

The name (as a string) or, from Mudlet 4.17.0, the ID number of a single item, (which will be that returned by a temp* function to create such an item to identify the item).

type:

The type can be 'alias', 'button' (Mudlet 4.10+), 'trigger', 'timer', 'keybind' (Mudlet 3.2+), or 'script' (Mudlet 3.17+).

isPrompt

isPrompt(): Returns true or false depending on if the line at the cursor position is a prompt. This infallible feature is available for games that supply GA events (to check if yours is one, look to bottom-right of the main window - if it doesn’t say <No GA>, then it supplies them).

Example use could be as a Lua function, making closing gates on a prompt real easy.

Example

-- make a trigger pattern with 'Lua function', and this will trigger on every prompt!
-- note that this is deprecated as we now have the prompt trigger type which does the same thing
-- the function can still be useful for detecting if you're running code on a prompt for other reasons
-- but you should be using a prompt trigger for this rather than a Lua function trigger.
return isPrompt()

killAlias

killAlias(aliasID): Deletes a temporary alias with the given ID.

Parameters

aliasID:

The id returned by tempAlias to identify the alias.

-- deletes the alias with ID 5
killAlias(5)

killKey

killKey(name): Deletes a keybinding with the given name. If several keybindings have this name, they'll all be deleted.

Parameters

name:

The name or the id returned by tempKey to identify the key.

Available in Mudlet3.2+

-- make a temp key
local keyid = tempKey(mudlet.key.F8, [[echo("hi!")]])

-- delete the said temp key
killKey(keyid)

killTimer

killTimer(id): Deletes a tempTimer.

Note: Non-temporary timers that you have set up in the GUI or by using permTimer cannot be deleted with this function. Use disableTimer() and enableTimer() to turn them on or off.

Parameters

id: the ID returned by tempTimer.

Returns true on success and false if the timer id doesn’t exist anymore (timer has already fired) or the timer is not a temp timer.

Example

-- create the timer and remember the timer ID
timerID = tempTimer(10, [[echo("hello!")]])

-- delete the timer
killTimer(timerID)
-- reset the reference to it
timerID = nil

killTrigger

killTrigger(id): Deletes a tempTrigger, or a trigger made with one of the temp<type>Trigger() functions.

Note: When used in out of trigger contexts, the triggers are disabled and deleted upon the next line received from the game - so if you are testing trigger deletion within an alias, the 'statistics' window will be reporting trigger counts that are disabled and pending removal, and thus are no cause for concern.

Parameters

id:

The ID returned by a temp<type>Trigger to identify the item. ID is a string and not a number.

Returns true on success and false if the trigger id doesn’t exist anymore (trigger has already fired) or the trigger is not a temp trigger.

Note: As of Mudlet version 4.16.0, triggers created with tempComplexRegexTrigger can only be killed using the name string specified during creation.

permAlias

permAlias(name, parent, regex, lua code)

Creates a persistent alias that stays after Mudlet is restarted and shows up in the Script Editor.

Parameters

name:

The name you’d like the alias to have.

parent:

The name of the group, or another alias you want the trigger to go in - however if such a group/alias doesn’t exist, it won’t do anything. Use "" to make it not go into any groups.

regex:

The pattern that you’d like the alias to use.

lua code:

The script the alias will do when it matches.
Example

-- creates an alias called "new alias" in a group called "my group"
permAlias("new alias", "my group", "^test$", [[echo ("say it works! This alias will show up in the script editor too.")]])

Note: Mudlet by design allows duplicate names - so calling permAlias with the same name will keep creating new aliases. You can check if an alias already exists with the exists function.

permGroup

permGroup(name, itemtype, [parent])

Creates a new group of a given type. This group will persist through Mudlet restarts.
Parameters

name:

The name of the new group item you want to create.

itemtype :

The type of the item, can be one of the following:

trigger

alias

timer

script (available in Mudlet 4.7+)

key (available in Mudlet 4.11+)

parent (available in Mudlet 3.1+):

(optional) Name of existing item which the new item will be created as a child of. If none is given, item will be at the root level (not nested in any other groups)

Example

--create a new trigger group
permGroup("Combat triggers", "trigger")

--create a new alias group only if one doesn't exist already
if exists("Defensive aliases", "alias") == 0 then
  permGroup("Defensive aliases", "alias")
end

permPromptTrigger

permPromptTrigger(name, parent, lua code): Creates a persistent trigger for the in-game prompt that stays after Mudlet is restarted and shows up in the Script Editor.

Note: If the trigger is not working, check that the N: bottom-right has a number. This feature requires telnet Go-Ahead (GA) or End-of-Record (EOR) to be enabled in your game. Available in Mudlet 3.6+

Parameters

name is the name you’d like the trigger to have.
parent is the name of the group, or another trigger you want the trigger to go in - however if such a group/trigger doesn’t exist, it won’t do anything. Use "" to make it not go into any groups.
lua code is the script the trigger will do when it matches.

Example

permPromptTrigger("echo on prompt", "", [[echo("hey! this thing is working!\n")]])

permRegexTrigger

permRegexTrigger(name, parent, pattern table, lua code): Creates a persistent trigger with one or more regex patterns that stays after Mudlet is restarted and shows up in the Script Editor.

Parameters

name is the name you’d like the trigger to have.
parent is the name of the group, or another trigger you want the trigger to go in - however if such a group/trigger doesn’t exist, it won’t do anything. Use "" to make it not go into any groups.
pattern table is a table of patterns that you’d like the trigger to use - it can be one or many.
lua code is the script the trigger will do when it matches.

Example

-- Create a regex trigger that will match on the prompt to record your status
permRegexTrigger("Prompt", "", {"^(\\d+)h, (\\d+)m"}, [[health = tonumber(matches[2]); mana = tonumber(matches[3])]])

Note: Mudlet by design allows duplicate names - so calling permRegexTrigger with the same name will keep creating new triggers. You can check if a trigger already exists with the exists() function.

permBeginOfLineStringTrigger

permBeginOfLineStringTrigger(name, parent, pattern table, lua code): Creates a persistent trigger that stays after Mudlet is restarted and shows up in the Script Editor. The trigger will go off whenever one of the regex patterns it's provided with matches. The function returns the trigger ID for subsequent enableTrigger(), disableTrigger() and killTrigger() calls.

Parameters

name is the name you’d like the trigger to have.
parent is the name of the group, or another trigger you want the trigger to go in - however if such a group/trigger doesn’t exist, it won’t do anything. Use "" to make it not go into any groups.
pattern table is a table of patterns that you’d like the trigger to use - it can be one or many.
lua code is the script the trigger will do when it matches.

Examples

-- Create a trigger that will match on anything that starts with "You sit" and do "stand".
-- It will not go into any groups, so it'll be on the top.
permBeginOfLineStringTrigger("Stand up", "", {"You sit"}, [[send ("stand")]])

-- Another example - lets put our trigger into a "General" folder and give it several patterns.
permBeginOfLineStringTrigger("Stand up", "General", {"You sit", "You fall", "You are knocked over by"}, [[send ("stand")]])

Note: Mudlet by design allows duplicate names - so calling permBeginOfLineStringTrigger with the same name will keep creating new triggers. You can check if a trigger already exists with the exists() function.

permSubstringTrigger

permSubstringTrigger( name, parent, pattern table, lua code ): Creates a persistent trigger with one or more substring patterns that stays after Mudlet is restarted and shows up in the Script Editor.
Parameters

name is the name you’d like the trigger to have.
parent is the name of the group, or another trigger you want the trigger to go in - however if such a group/trigger doesn’t exist, it won’t do anything. Use "" to make it not go into any groups.
pattern table is a table of patterns that you’d like the trigger to use - it can be one or many.
lua code is the script the trigger will do when it matches.

Example

-- Create a trigger to highlight the word "pixie" for us
permSubstringTrigger("Highlight stuff", "General", {"pixie"},
[[selectString(line, 1) bg("yellow") resetFormat()]])

-- Or another trigger to highlight several different things
permSubstringTrigger("Highlight stuff", "General", {"pixie", "cat", "dog", "rabbit"},
[[selectString(line, 1) fg ("blue") bg("yellow") resetFormat()]])

Note: Mudlet by design allows duplicate names - so calling permSubstringTrigger with the same name will keep creating new triggers. You can check if a trigger already exists with the exists() function.

permScript

permScript(name, parent, lua code): Creates a new script in the Script Editor that stays after Mudlet is restarted.

Parameters

name: name of the script.
parent: name of the script group you want the script to go in.
lua code: is the code with string you are putting in your script.

Returns

a unique id number for that script.

Example

-- create a script in the "first script group" group
permScript("my script", "first script group", [[send ("my script that's in my first script group fired!")]])
-- create a script that's not in any group; just at the top
permScript("my script", "", [[send ("my script that's in my first script group fired!")]])

-- enable Script - a script element is disabled at creation
enableScript("my script")

Note: The script is called once but NOT active after creation, it will need to be enabled by enableScript().

Note: Mudlet by design allows duplicate names - so calling permScript with the same name will keep creating new script elements. You can check if a script already exists with the exists() function.

Note: If the lua code parameter is an empty string, then the function will create a script group instead.

Available in Mudlet4.8+

permTimer

permTimer(name, parent, seconds, lua code): Creates a persistent timer that stays after Mudlet is restarted and shows up in the Script Editor.

Parameters

name

name of the timer.

parent

name of the timer group you want the timer to go in.

seconds

a floating point number specifying a delay in seconds after which the timer will do the lua code (stored as the timer's "script") you give it as a string.

lua code is the code with string you are doing this to.

Returns

a unique id number for that timer.

Example

-- create a timer in the "first timer group" group
permTimer("my timer", "first timer group", 4.5, [[send ("my timer that's in my first timer group fired!")]])
-- create a timer that's not in any group; just at the top
permTimer("my timer", "", 4.5, [[send ("my timer that's in my first timer group fired!")]])

-- enable timer - they start off disabled until you're ready
enableTimer("my timer")

Note: The timer is NOT active after creation, it will need to be enabled by a call to enableTimer() before it starts.

Note: Mudlet by design allows duplicate names - so calling permTimer with the same name will keep creating new timers. You can check if a timer already exists with the exists() function.

permKey

permKey(name, parent, [modifier], key code, lua code): Creates a persistent key that stays after Mudlet is restarted and shows up in the Script Editor.

Parameters

name

name of the key.

parent

name of the timer group you want the timer to go in or "" for the top level.

modifier

(optional) modifier to use - can be one of mudlet.keymodifier.Control, mudlet.keymodifier.Alt, mudlet.keymodifier.Shift, mudlet.keymodifier.Meta, mudlet.keymodifier.Keypad, or mudlet.keymodifier.GroupSwitch or the default value of mudlet.keymodifier.None which is used if the argument is omitted. To use multiple modifiers, add them together: (mudlet.keymodifier.Shift + mudlet.keymodifier.Control)

key code

actual key to use - one of the values available in mudlet.key, e.g. mudlet.key.Escape, mudlet.key.Tab, mudlet.key.F1, mudlet.key.A, and so on. The list is a bit long to list out in full so it is available here.

set to -1 if you want to create a key folder instead.

lua code'

code you would like the key to run.

Returns

a unique id number for that key.

Available in Mudlet3.2+, creating key folders in Mudlet 4.10+

Example

-- create a key at the top level for F8
permKey("my key", "", mudlet.key.F8, [[echo("hey this thing actually works!\n")]])

-- or Ctrl+F8
permKey("my key", "", mudlet.keymodifier.Control, mudlet.key.F8, [[echo("hey this thing actually works!\n")]])

-- Ctrl+Shift+W
permKey("jump keybinding", "", mudlet.keymodifier.Control + mudlet.keymodifier.Shift, mudlet.key.W, [[send("jump")]])

Note: Mudlet by design allows duplicate names - so calling permKey with the same name will keep creating new keys. You can check if a key already exists with the exists() function. The key will be created even if the lua code does not compile correctly - but this will be apparent as it will be seen in the Editor.

printCmdLine

printCmdLine([name], text)

Replaces the current text in the input line, and sets it to the given text.

Parameters

name: (optional) name of the command line. If not given, main commandline's text will be set.
text: text to set

printCmdLine("say I'd like to buy ")

raiseEvent

raiseEvent(event_name, arg-1, … arg-n)

Raises the event event_name. The event system will call the main function (the one that is called exactly like the script name) of all such scripts in this profile that have registered event handlers. If an event is raised, but no event handler scripts have been registered with the event system, the event is ignored and nothing happens. This is convenient as you can raise events in your triggers, timers, scripts etc. without having to care if the actual event handling has been implemented yet - or more specifically how it is implemented. Your triggers raise an event to tell the system that they have detected a certain condition to be true or that a certain event has happened. How - and if - the system is going to respond to this event is up to the system and your trigger scripts don’t have to care about such details. For small systems it will be more convenient to use regular function calls instead of events, however, the more complicated your system will get, the more important events will become because they help reduce complexity very much.

The corresponding event handlers that listen to the events raised with raiseEvent() need to use the script name as function name and take the correct number of arguments.

raiseGlobalEvent

raiseGlobalEvent(event_name, arg-1, … arg-n)

Like raiseEvent() this raises the event "event_name", but this event is sent to all other opened profiles instead. The profiles receive the event in circular alphabetical order (if profile "C" raised this event and we have profiles "A", "C", and "E", the order is "E" -> "A", but if "E" raised the event the order would be "A" -> "C"); execution control is handed to the receiving profiles so that means that long running events may lock up the profile that raised the event.

The sending profile's name is automatically appended as the last argument to the event.

Note: possible arguments can be string, number, boolean, or nil, but not table or function.

Example

-- from profile called "My game" this raises an event "my event" with additional arguments 1, 2, 3, "My game" to all profiles except the original one
raiseGlobalEvent("my event", 1, 2, 3)

-- want the current profile to receive it as well? Use raiseEvent
raiseEvent("my event", 1, 2, 3)

-- example of calling functions in one profile from another:
-- profile B:
control = control or {}
function control.updateStatus()
  disableTrigger("test triggers")
  print("disabling triggers worked!")
end

-- this handles calling the right function in the control table
function control.marshaller(_, callfunction)
  if control[callfunction] then control[callfunction]()
  else
    cecho("<red>Asked to call an unknown function: "..callfunction)
  end
end

registerAnonymousEventHandler("sysSendAllProfiles", "control.marshaller")

-- profile A:
raiseGlobalEvent("sysSendAllProfiles", "updateStatus")
raiseGlobalEvent("sysSendAllProfiles", "invalidfunction")

Available in Mudlet3.1.0+

Tip: you might want to add the profile name to your plain raiseEvent() arguments. This'll help you tell which profile your event came from similar to raiseGlobalEvent().

registerNamedTimer

success = registerNamedTimer(userName, timerName, time, functionReference, [repeating])

Registers a named timer with name timerName. Named timers are protected from duplication and can be stopped and resumed, unlike normal tempTimers. A separate list is kept for each userName, to enforce name spacing and avoid collisions

See also: tempTimer(), stopNamedTimer(), resumeNamedTimer(), deleteNamedTimer(), registerNamedEventHandler()

Available in Mudlet4.14+

Parameters

userName:

The user name the event handler was registered under.

timerName:

The name of the handler. Used to reference the handler in other functions and prevent duplicates. Recommended you use descriptive names, "hp" is likely to collide with something else, "DemonVitals" less so.

time:

The amount of time in seconds to wait before firing.

functionReference:

The function reference to run when the event comes in. Can be the name of a function, "handlerFunction", or the lua function itself.

repeating:

(optional) if true, the timer continue to fire until the stop it using stopNamedTimer()
Returns

true if successful, otherwise errors.

Example

-- establish a named timer called "Check balance" which runs balanceChecker() after 1 second
-- it is started automatically when registered, and fires only once despite being run twice
-- you wouldn't do this intentionally, but illustrates the duplicate protection
registerNamedTimer("Demonnic", "Check Balance", 1, balanceChecker)
registerNamedTimer("Demonnic", "Check Balance", 1, balanceChecker)

-- then the next time you want to make/use the same timer, you can shortcut it with
resumeNamedTimer("Demonnic", "Check Balance")

remainingTime

remainingTime(timer id number or name)

Returns the remaining time in floating point form in seconds (if it is active) for the timer (temporary or permanent) with the id number or the (first) one found with the name.

If the timer is inactive or has expired or is not found it will return a nil and an error message. It, theoretically could also return 0 if the timer is overdue, i.e. it has expired but the internal code has not yet been run but that has not been seen in during testing. Permanent offset timers will only show as active during the period when they are running after their parent has expired and started them.

resetProfileIcon

resetProfileIcon(): Resets the profile's icon in the connection screen to default.

resetStopWatch

resetStopWatch(watchID): This function resets the time to 0:0:0.0, but does not stop or start the stop watch. You can stop it with stopStopWatch or start it with startStopWatch → createStopWatch

resumeNamedTimer

success = resumeNamedTimer(userName, handlerName)

Resumes a named timer with name handlerName and causes it to fire again. One time unless it was registered as repeating.

See also: registerNamedTimer(), stopNamedTimer()

Available in Mudlet4.14+

Parameter

userName:

The user name the event handler was registered under.s

handlerName:

The name of the handler to resume. Same as used when you called registerNamedTimer()

Returns

true if successful, false if it didn't exist. If the timer is waiting to fire it will be restarted at 0.

Example

local resumed = resumeNamedTimer("Demonnic", "DemonVitals")
if resumed then
  cecho("DemonVitals resumed!")
else
  cecho("DemonVitals doesn't exist, so cannot resume it.")
end

setButtonState

setButtonState(ButtonNameOrID, checked): Sets the state of a check-able ("push-down") type button from any Mudlet item's script - but does not cause the script or one of the commands associated with that button to be run/sent.; See also: getButtonState().

Available in Mudlet4.13+

Parameters

ButtonNameOrID:

The name of the button as a string or a unique ID (positive) integer number {for a name only one matching one will be affected - it will be the same one that the matching getButtonState() reports upon}.

checked:

boolean value that indicated whether the state required is down (true) or up (false).

Returns

A boolean value indicating true if the visible state was actually changed, i.e. had any effect. This function will return a nil and a suitable error message if the identifying name or ID was not found or was not a check-able (push-down) button item (i.e. was a non-checkable button or a menu or a toolbar instead).

Example

-- inside, for example, an initialization script for a GUI package:
setButtonState("Sleep", false)
setButtonState("Sit", false)
-- these are going to be used as "radio" buttons where setting one
-- of them will unset all the others, they will each need something
-- similar in their own scripts to unset all the others in the set
-- and also something to prevent them from being unset by clicking
-- on themselves:
setButtonState("Wimpy", true)
setButtonState("Defensive", false)
setButtonState("Normal", false)
setButtonState("Brave", false)
if character.type == "Warrior" then
    -- Only one type has this mode - and it can only be reset by
    -- something dying (though that could be us!)
    setButtonState("Beserk!!!", false)
end

setConsoleBufferSize

setConsoleBufferSize([consoleName], linesLimit, sizeOfBatchDeletion): Sets the maximum number of lines a buffer (main window or a miniconsole) can hold. Default is 10,000.; Returns nothing on success (up to Mudlet 4.16) or true (from Mudlet 4.17); nil and an error message on failure.

Parameters

consoleName:

(optional) The name of the window. If omitted, uses the main console.

linesLimit:

Sets the amount of lines the buffer should have.

Note: Mudlet performs extremely efficiently with even huge numbers, but there is of course a limit to your computer's memory. As of Mudlet 4.7+, this amount will be capped to that limit on macOS and Linux (on Windows, it's capped lower as Mudlet on Windows is 32bit).

sizeOfBatchDeletion:

Specifies how many lines should Mudlet delete at once when you go over the limit - it does it in bulk because it's efficient to do so.

Example

-- sets the main windows size to 1 million lines maximum - which is more than enough!
setConsoleBufferSize("main", 1000000, 1000)

setProfileIcon

setProfileIcon(iconPath): Set a custom icon for this profile in the connection screen.

Returns true if successful, or nil+error message if not.

setScript

setScript(scriptName, luaCode, [occurrence]): Sets the script's Lua code, replacing existing code. If you have many scripts with the same name, use the 'occurrence' parameter to choose between them.; If you'd like to add code instead of replacing it, have a look at appendScript().; Returns -1 if the script isn't found - to create a script, use permScript().

Returns

a unique id number for that script.

Parameters

scriptName: name of the script to change the code.
luaCode: new Lua code to set.
occurrence: The position of the script. Optional, defaults to 1 (first).

Example

-- make sure a script named "testscript" exists first, then do:
setScript("testscript", [[echo("This is a test\n")]], 1)

Available in Mudlet4.8+

setStopWatchName

setStopWatchName(watchID/currentStopWatchName, newStopWatchName)

Parameters

watchID (number) / currentStopWatchName (string): The stopwatch ID you get from createStopWatch() or the name supplied to that function at that time, or previously applied with this function.
newStopWatchName (string): The name to use for this stopwatch from now on.

Returns

true on success, nil and an error message if no matching stopwatch is found.

Note: Either currentStopWatchName or newStopWatchName may be empty strings: if the first of these is so then the lowest ID numbered stopwatch without a name is chosen; if the second is so then an existing name is removed from the chosen stopwatch.

setStopWatchPersistence

setStopWatchPersistence(watchID/watchName, state)

Parameters

watchID (number) / watchName (string): The stopwatch ID you get from createStopWatch() or the name supplied to that function or applied later with setStopWatchName()
state (boolean): if true the stopWatch will be saved.

Returns

true on success, nil and an error message if no matching stopwatch is found.

Sets or resets the flag so that the stopwatch is saved between sessions or after a resetProfile() call. If set then, if stopped the elapsed time recorded will be unchanged when the stopwatch is reloaded in the next session; if running the elapsed time will continue to increment and it will include the time that the profile was not loaded, therefore it can be used to measure events in real-time, outside of the profile!

Note: When a persistent stopwatch is reloaded in a later session (or after a use of resetProfile()) the stopwatch may not be allocated the same ID number as before - therefore it is advisable to assign any persistent stopwatches a name, either when it is created or before the session is ended.

setTriggerStayOpen

setTriggerStayOpen(name, number of lines): Sets for how many more lines a trigger script should fire or a chain should stay open after the trigger has matched - so this allows you to extend or shorten the fire length of a trigger. The main use of this function is to close a chain when a certain condition has been met.

Parameters

name: The name of the trigger which has a fire length set (and which opens the chain).
number of lines: 0 to close the chain, or a positive number to keep the chain open that much longer.

Examples

-- if you have a trigger that opens a chain (has some fire length) and you'd like it to be closed 
-- on the next prompt, you could make a prompt trigger inside the chain with a script of:
setTriggerStayOpen("Parent trigger name", 0)
-- to close it on the prompt!

startStopWatch

startStopWatch(watchName or watchID, [resetAndRestart])

Stopwatches can be stopped (with stopStopWatch()) and then re-started any number of times. To ensure backwards compatibility, if the stopwatch is identified by a numeric argument then, unless a second argument of false is supplied as well this function will also reset the stopwatch to zero and restart it - whether it is running or not; otherwise only a stopped watch can be started and only a started watch may be stopped. Trying to repeat either will produce a nil and an error message instead; also the recorded time is no longer reset so that they can now be used to record a total of isolated periods of time like a real stopwatch.

Parameters

watchID/watchName: The stopwatch ID you get with createStopWatch(), or from 4.4.0 the name assigned with that function or setStopWatchName().
resetAndRestart: Boolean flag needed (as false) to make the function from 4.4.0, when supplied with a numeric watch ID, to not reset the stopwatch and only start a previously stopped stopwatch. This behavior is automatic when a string watch name is used to identify the stopwatch but differs from how the function behaved prior to that version.

Returns

true on success, nil and an error message if no matching stopwatch is found or if it cannot be started (because the later style behavior was indicated and it was already running).

Examples

-- this is a common pattern for re-using stopwatches prior to 4.4.0 and starting them:
watch = watch or createStopWatch()
startStopWatch(watch)

After 4.4.0 the above code will work the same as it does not provide a second argument to the startStopWatch() function - if a false was used there it would be necessary to call stopStopWatch(...) and then resetStopWatch(...) before using startStopWatch(...) to re-use the stopwatch if the ID form is used, this is thus not quite the same behavior but it is more consistent with the model of how a real stopwatch would act.

stopAllNamedTimers

stopAllNamedTimers(userName)

Stops all named timers for userName and prevents them from firing any more. Information is retained and timers can be resumed.

See also: registerNamedTimer(), stopNamedTimer(), resumeNamedTimer()

Available in Mudlet4.14+

Example

stopAllNamedTimers("Demonnic") -- emergency stop situation, most likely.

stopNamedTimer

success = stopNamedTimer(userName, handlerName)

Stops a named timer with name handlerName and prevents it from firing any more. Information is stored so it can be resumed later if desired.

See also: registerNamedTimer(), resumeNamedTimer()

Available in Mudlet4.14+

Parameters

userName:

The user name the event handler was registered under.

handlerName:

The name of the handler to stop. Same as used when you called registerNamedTimer()

Returns

true if successful, false if it didn't exist or was already stopped

Example

local stopped = stopNamedTimer("Demonnic", "DemonVitals")
if stopped then
  cecho("DemonVitals stopped!")
else
  cecho("DemonVitals doesn't exist or already stopped; either way it won't fire any more.")
end

stopStopWatch

stopStopWatch(watchID or watchName): "Stops" (though see the note below) the stop watch and returns (only the first time it is called after the stopwatch has been set running with startStopWatch()) the elapsed time as a number of seconds, with a decimal portion give a resolution in milliseconds (thousandths of a second). You can also retrieve the current time without stopping the stopwatch with getStopWatchTime(), getBrokenDownStopWatchTime().

tempAnsiColorTrigger

tempAnsiColorTrigger(foregroundColor[, backgroundColor], code[, expireAfter]): This is an alternative to tempColorTrigger() which supports the full set of 256 ANSI color codes directly and makes a color trigger that triggers on the specified foreground and background color. The function returns the trigger ID for subsequent enableTrigger(), disableTrigger() and killTrigger() calls. The trigger is temporary in the sense that it won't stay when you close Mudlet, and it will go off multiple times until you disable or destroy it. You can also make it be temporary and self-delete after a number of matches with the expireAfter parameter.

Parameters

foregroundColor: The foreground color you'd like to trigger on.
backgroundColor: The background color you'd like to trigger on.
code to do: The code to do when the trigger runs - wrap it in [[ ]], or give it a Lua function.
expireAfter: Delete trigger after a specified number of matches. You can make a trigger match not count towards expiration by returning true after it fires.

BackgroundColor and/or expireAfter may be omitted.

Color codes (note that the values greater than or equal to zero are the actual number codes that ANSI and the game server uses for the 8/16/256 color modes)

Special codes (may be extended in the future):

-2 = default text color (what is used after an ANSI SGR 0 m code that resets the foreground and background colors to those set in the preferences)

-1 = ignore (only one of the foreground or background codes can have this value - otherwise it would not be a color trigger!)

ANSI 8-color set:

0 = (dark) black

1 = (dark) red

2 = (dark) green

3 = (dark) yellow

4 = (dark) blue

5 = (dark) magenta

6 = (dark) cyan

7 = (dark) white {a.k.a. light gray}

Additional colors in 16-color set:

8 = light black {a.k.a. dark gray}

9 = light red

10 = light green

11 = light yellow

12 = light blue

13 = light magenta

14 = light cyan

15 = light white

6 x 6 x 6 RGB (216) colors, shown as a 3x2-digit hex code

16 = #000000

17 = #000033

18 = #000066

...

229 = #FFFF99

230 = #FFFFCC

231 = #FFFFFF

24 gray-scale, also show as a 3x2-digit hex code

232 = #000000

233 = #0A0A0A

234 = #151515

...

253 = #E9E9E9

254 = #F4F4F4

255 = #FFFFFF

Examples

-- This script will re-highlight all text in a light cyan foreground color on any background with a red foreground color
-- until another foreground color in the current line is being met. temporary color triggers do not offer match_all
-- or filter options like the GUI color triggers because this is rarely necessary for scripting.
-- A common usage for temporary color triggers is to schedule actions on the basis of forthcoming text colors in a particular context.
tempAnsiColorTrigger(14, -1, [[selectString(matches[1],1) fg("red")]])
-- or:
tempAnsiColorTrigger(14, -1, function()
  selectString(matches[1], 1)
  fg("red")
end)

-- match the trigger only 4 times
tempColorTrigger(14, -1, [[selectString(matches[1],1) fg("red")]], 4)

Available in Mudlet3.17+

tempAlias

aliasID = tempAlias(regex, code to do): Creates a temporary alias - temporary in the sense that it won't be saved when Mudlet restarts (unless you re-create it). The alias will go off as many times as it matches, it is not a one-shot alias. The function returns an ID for subsequent enableAlias(), disableAlias() and killAlias() calls.

Parameters

regex: Alias pattern in regex.
code to do: The code to do when the alias fires - wrap it in [[ ]].

Examples

myaliasID = tempAlias("^hi$", [[send ("hi") echo ("we said hi!")]])

-- you can also delete the alias later with:
killAlias(myaliasID)

-- tempAlias also accepts functions (and thus closures) - which can be an easier way to embed variables and make the code for an alias look less messy:

local variable = matches[2]
tempAlias("^hi$", function () send("hello, " .. variable) end)

tempBeginOfLineTrigger

tempBeginOfLineTrigger(part of line, code, expireAfter): Creates a trigger that will go off whenever the part of line it's provided with matches the line right from the start (doesn't matter what the line ends with). The trigger is temporary in the sense that it won't stay when you close Mudlet, and it will go off multiple times until you disable or destroy it. You can also make it be temporary and self-delete after a number of matches with the expireAfter parameter. The function returns the trigger ID for subsequent enableTrigger(), disableTrigger() and killTrigger() calls.

Parameters

part of line: start of the line that you'd like to match. This can also be regex.
code to do: code to do when the trigger runs - wrap it in [[ ]], or give it a Lua function (since Mudlet 3.5.0).
expireAfter: Delete trigger after a specified number of matches (since Mudlet 3.11). You can make a trigger match not count towards expiration by returning true after it fires.

Examples

mytriggerID = tempBeginOfLineTrigger("Hello", [[echo("We matched!")]])

--[[ now this trigger will match on any of these lines:
Hello
Hello!
Hello, Bob!

but not on:
Oh, Hello
Oh, Hello!
]]

-- or as a function:
mytriggerID = tempBeginOfLineTrigger("Hello", function() echo("We matched!") end)

-- you can make the trigger match only a certain amount of times as well, 5 in this example:
tempBeginOfLineTrigger("This is the start of the line", function() echo("We matched!") end, 5)

-- if you want a trigger match not to count towards expiration, return true. In this example it'll match 5 times unless the line is "Start of line and this is the end."
tempBeginOfLineTrigger("Start of line", 
function()
  if line == "Start of line and this is the end." then
    return true
  else
    return false
  end
end, 5)

tempButton

tempButton(toolbar name, button text, orientation): Creates a temporary button. Temporary means, it will disappear when Mudlet is closed.

Parameters

toolbar name: The name of the toolbar to place the button into.
button text: The text to display on the button.
orientation: a number 0 or 1 where 0 means horizontal orientation for the button and 1 means vertical orientation for the button. This becomes important when you want to have more than one button in the same toolbar.

Example

-- makes a temporary toolbar with two buttons at the top of the main Mudlet window 
lua tempButtonToolbar("topToolbar", 0, 0)
lua tempButton("topToolbar", "leftButton", 0)
lua tempButton("topToolbar", "rightButton", 0)

Note: This function is not that useful as there is no function yet to assign a Lua script or command to such a temporary button - though it may have some use to flag a status indication!

tempButtonToolbar

tempButtonToolbar(name, location, orientation): Creates a temporary button toolbar. Temporary means, it will disappear when Mudlet is closed.

Parameters

name: The name of the toolbar.
location: a number from 0 to 3, where 0 means "at the top of the screen", 1 means "left side", 2 means "right side" and 3 means "in a window of its own" which can be dragged and attached to the main Mudlet window if needed.
orientation: a number 0 or 1, where 0 means horizontal orientation for the toolbar and 1 means vertical orientation for the toolbar. This becomes important when you want to have more than one toolbar in the same location of the window.

Example

-- makes a temporary toolbar with two buttons at the top of the main Mudlet window 
lua tempButtonToolbar("topToolbar", 0, 0)
lua tempButton("topToolbar", "leftButton", 0)
lua tempButton("topToolbar", "rightButton", 0)

tempColorTrigger

tempColorTrigger(foregroundColor, backgroundColor, code, expireAfter): Makes a color trigger that triggers on the specified foreground and background color. Both colors need to be supplied in form of these simplified ANSI 16 color mode codes. The function returns the trigger ID for subsequent enableTrigger(), disableTrigger() and killTrigger() calls. The trigger is temporary in the sense that it won't stay when you close Mudlet, and it will go off multiple times until you disable or destroy it. You can also make it be temporary and self-delete after a number of matches with the expireAfter parameter.

tempComplexRegexTrigger

tempComplexRegexTrigger(name, regex, code, multiline, fg color, bg color, filter, match all, highlight fg color, highlight bg color, play sound file, fire length, line delta, expireAfter): Allows you to create a temporary trigger in Mudlet, using any of the UI-available options. The trigger is temporary in the sense that it won't stay when you close Mudlet, and it will go off multiple times until you disable or destroy it. You can also make it be temporary and self-delete after a number of matches with the expireAfter parameter.; Returns the trigger ID or nil and an error message (on error).

Parameters

name - The name you call this trigger. You can use this with killTrigger().
regex - The regular expression you want to match.
code - Code to do when the trigger runs. You need to wrap it in [[ ]], or give a Lua function (since Mudlet 3.5.0).
multiline - Set this to 1, if you use multiple regex (see note below), and you need the trigger to fire only if all regex have been matched within the specified line delta. Then all captures will be saved in multimatches instead of matches. If this option is set to 0, the trigger will fire when any regex has been matched.
fg color - The foreground color you'd like to trigger on - Not currently implemented.
bg color - The background color you'd like to trigger on - Not currently implemented.
filter - Do you want only the filtered content (=capture groups) to be passed on to child triggers? Otherwise also the initial line.
match all - Set to 1, if you want the trigger to match all possible occurrences of the regex in the line. When set to 0, the trigger will stop after the first successful match.
highlight fg color - The foreground color you'd like your match to be highlighted in. e.g. "yellow", "#ff0" or "#ffff00"
highlight bg color - The background color you'd like your match to be highlighted in. e.g. "red", "#f00" or "#ff0000"
play sound file - Set to the name of the sound file you want to play upon firing the trigger. e.g. "C:/windows/media/chord.wav"
fire length - Number of lines within which all condition must be true to fire the trigger.
line delta - Keep firing the script for x more lines, after the trigger or chain has matched.
expireAfter - Delete trigger after a specified number of matches (since Mudlet 3.11). You can make a trigger match not count towards expiration by returning true after it fires.

Note: Set the options starting at multiline to 0, if you don't want to use those options. Otherwise enter 1 to activate or the value you want to use.

Note: If you want to use the color option, you need to provide both fg and bg together. - Not currently implemented.

Examples

-- This trigger will be activated on any new line received.
triggerNumber = tempComplexRegexTrigger("anyText", "^(.*)$", [[echo("Text received!")]], 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, nil)

-- This trigger will match two different regex patterns:
tempComplexRegexTrigger("multiTrigger", "first regex pattern", [[]], 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, nil)
tempComplexRegexTrigger("multiTrigger", "second regex pattern", [[echo("Trigger matched!")]], 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, nil)

Note: For making a multiline trigger like in the second example, you need to use the same trigger name and options, providing the new pattern to add. Note that only the last script given will be set, any others ignored.

tempExactMatchTrigger

tempExactMatchTrigger(exact line, code, expireAfter): Creates a trigger that will go off whenever the line from the game matches the provided line exactly (ends the same, starts the same, and looks the same). You don't need to use any of the regex symbols here (^ and $). The function returns the trigger ID for subsequent enableTrigger(), disableTrigger() and killTrigger() calls. The trigger is temporary in the sense that it won't stay when you close Mudlet, and it will go off multiple times until you disable or destroy it. You can also make it be temporary and self-delete after a number of matches with the expireAfter parameter.

Parameters

exact line: exact line you'd like to match.
code: code to do when the trigger runs - wrap it in [[ ]], or give it a Lua function (since Mudlet 3.5.0).
expireAfter: Delete trigger after a specified number of matches (since Mudlet 3.11). You can make a trigger match not count towards expiration by returning true after it fires.

Examples

mytriggerID = tempExactMatchTrigger("You have recovered balance on all limbs.", [[echo("We matched!")]])

-- as a function:
mytriggerID = tempExactMatchTrigger("You have recovered balance on all limbs.", function() echo("We matched!") end)

-- expire after 4 matches:
tempExactMatchTrigger("You have recovered balance on all limbs.", function() echo("Got balance back!\n") end, 4)

-- you can also avoid expiration by returning true:
tempExactMatchTrigger("You have recovered balance on all limbs.", function() echo("Got balance back!\n") return true end, 4)

tempKey

tempKey([modifier], key code, lua code): Creates a keybinding. This keybinding isn't temporary in the sense that it'll go off only once (it'll go off as often as you use it), but rather it won't be saved when Mudlet is closed.

tempLineTrigger

tempLineTrigger(from, howMany, code): Temporary trigger that will fire on n consecutive lines following the current line. This is useful to parse output that is known to arrive in a certain line margin or to delete unwanted output from the game - the trigger does not require any patterns to match on. The function returns the trigger ID for subsequent enableTrigger(), disableTrigger() and killTrigger() calls. The trigger is temporary in the sense that it won't stay when you close Mudlet, and it will go off multiple times until you disable or destroy it. You can also make it be temporary and self-delete after a number of matches with the expireAfter parameter.

Parameters

from: from which line after this one should the trigger activate - 1 will activate right on the next line.
howMany: how many lines to run for after the trigger has activated.
code: code to do when the trigger runs - wrap it in [[ ]], or give it a Lua function (since Mudlet 3.5.0).

Example

-- Will fire 3 times with the next line from the game
tempLineTrigger(1, 3, function() print(" trigger matched!") end)

-- Will fire 5 lines after the current line and fire twice on 2 consecutive lines
tempLineTrigger(5, 2, function() print(" trigger matched!") end, 7)

tempPromptTrigger

tempPromptTrigger(code, expireAfter): Temporary trigger that will match on the games prompt. The function returns the trigger ID for subsequent enableTrigger(), disableTrigger() and killTrigger() calls. The trigger is temporary in the sense that it won't stay when you close Mudlet, and it will go off multiple times until you disable or destroy it. You can also make it be temporary and self-delete after a number of matches with the expireAfter parameter.

Note: If the trigger is not working, check that the N: bottom-right has a number. This feature requires telnet Go-Ahead to be enabled in the game.

Available in Mudlet3.6+

Parameters

code:

code to do when the trigger runs - wrap it in [[ ]], or give it a Lua function.

expireAfter: (available in Mudlet 3.11+)

Delete trigger after a specified number of matches. You can make a trigger match not count towards expiration by returning true after it fires.

Example

tempPromptTrigger(function()
  echo("hello! this is a prompt!")
end)

-- match only 2 times:
tempPromptTrigger(function()
  echo("hello! this is a prompt!")
end, 2)

-- match only 2 times, unless the prompt is "55 health."
tempPromptTrigger(function()
  if line == "55 health." then return true end
end, 2)

tempRegexTrigger

tempRegexTrigger(regex, code, expireAfter): Creates a temporary regex trigger that executes the code whenever it matches. The function returns the trigger ID for subsequent enableTrigger(), disableTrigger() and killTrigger() calls. The trigger is temporary in the sense that it won't stay when you close Mudlet, and it will go off multiple times until you disable or destroy it. You can also make it be temporary and self-delete after a number of matches with the expireAfter parameter.

Parameters

regex: regular expression that lines will be matched on.
code: code to do when the trigger runs - wrap it in [[ ]], or give it a Lua function (since Mudlet 3.5.0).
expireAfter: Delete trigger after a specified number of matches (since Mudlet 3.11). You can make a trigger match not count towards expiration by returning true after it fires.

Examples

-- create a non-duplicate trigger that matches on any line and calls a function
html5log = html5log or {}
if html5log.trig then killTrigger(html5log.trig) end
html5log.trig = tempRegexTrigger("^", [[html5log.recordline()]])
-- or a simpler variant:
html5log.trig = tempRegexTrigger("^", html5log.recordline)

-- only match 3 times:
tempRegexTrigger("^You prick (.+) twice in rapid succession with", function() echo("Hit "..matches[2].."!\n") end, 3)

-- since Mudlet 4.11+ you can use named capturing groups
tempRegexTrigger("^You see (?<material>\\w+) axe inside chest\\.", function() echo("\nAxe is " .. matches.material) end)

tempTimer

tempTimer(time, code to do[, repeating]): Creates a temporary one-shot timer and returns the timer ID, which you can use with enableTimer(), disableTimer() and killTimer() functions. You can use 2.3 seconds or 0.45 etc. After it has fired, the timer will be deactivated and destroyed, so it will only go off once. Here is a more detailed introduction to tempTimer.

Parameters

time: The time in seconds for which to set the timer for - you can use decimals here for precision. The timer will go off x given seconds after you make it.
code to do: The code to do when the timer is up - wrap it in [[ ]], or provide a Lua function.
repeating: (optional) if true, keep firing the timer over and over until you kill it (available in Mudlet 4.0+).

Examples

-- wait half a second and then run the command
tempTimer(0.5, function() send("kill monster") end)

-- echo between 1 and 5 seconds after creation
tempTimer(math.random(1, 5), function() echo("hi!") end) 

-- or an another example - two ways to 'embed' variable in a code for later:
local name = matches[2]
tempTimer(2, [[send("hello, ]]..name..[[ !")]])
-- or:
tempTimer(2, function()
  send("hello, "..name)
end)

-- create a looping timer
timerid = tempTimer(1, function() display("hello!") end, true)

-- later when you'd like to stop it:
killTimer(timerid)

Note: Double brackets, e.g: [[ ]] can be used to quote strings in Lua. The difference to the usual `" " quote syntax is that `[[ ]] also accepts the character ". Consequently, you don’t have to escape the " character in the above script. The other advantage is that it can be used as a multiline quote, so your script can span several lines.

Note: Lua code that you provide as an argument is compiled from a string value when the timer fires. This means that if you want to pass any parameters by value e.g. you want to make a function call that uses the value of your variable myGold as a parameter you have to do things like this:

tempTimer( 3.8, [[echo("at the time of the tempTimer call I had ]] .. myGold .. [[ gold.")]] )

-- tempTimer also accepts functions (and thus closures) - which can be an easier way to embed variables and make the code for timers look less messy:

local variable = matches[2]
tempTimer(3, function () send("hello, " .. variable) end)

tempTrigger

tempTrigger(substring, code, expireAfter): Creates a substring trigger that executes the code whenever it matches. The function returns the trigger ID for subsequent enableTrigger(), disableTrigger() and killTrigger() calls. The trigger is temporary in the sense that it won't stay when you close Mudlet, and it will go off multiple times until you disable or destroy it. You can also make it be temporary and self-delete after a number of matches with the expireAfter parameter.

Parameters

substring: The substring to look for - this means a part of the line. If your provided text matches anywhere within the line from the game, the trigger will go off.
code: The code to do when the trigger runs - wrap it in [[ ]], or give it a Lua function (since Mudlet 3.5)
expireAfter: Delete trigger after a specified number of matches (since Mudlet 3.11). You can make a trigger match not count towards expiration by returning true after it fires.

Example:

-- this example will highlight the contents of the "target" variable.
-- it will also delete the previous trigger it made when you call it again, so you're only ever highlighting one name
if id then killTrigger(id) end
id = tempTrigger(target, [[selectString("]] .. target .. [[", 1) fg("gold") resetFormat()]])

-- you can also write the same line as:
id = tempTrigger(target, function() selectString(target, 1) fg("gold") resetFormat() end)

-- or like so if you have a highlightTarget() function somewhere
id = tempTrigger(target, highlightTarget)

-- a simpler trigger to replace "hi" with "bye" whenever you see it
tempTrigger("hi", [[selectString("hi", 1) replace("bye")]])

-- this trigger will go off only 2 times
tempTrigger("hi", function() selectString("hi", 1) replace("bye") end, 2)

-- table to store our trigger IDs in
nameIDs = nameIDs or {}
-- delete any existing triggers we've already got
for _, id in ipairs(nameIDs) do killTrigger(id) end

-- create new ones, avoiding lots of ]] [[ to embed the name
for _, name in ipairs{"Alice", "Ashley", "Aaron"} do
  nameIDs[#nameIDs+1] = tempTrigger(name, function() print(" Found "..name.."!") end)
end

Additional Notes

tempTriggers begin matching on the same line they're created on.

If your code deletes and recreates the tempTrigger, or if you send a matching command again, it's possible to get into an infinite loop.

Make use of the expireAfter parameter, disableTrigger(), or killTrigger() to prevent a loop from forming.

Networking Functions

A collection of functions for managing networking.

connectToServer

connectToServer(host, port, [save]): Connects to a given game.

Parameters

host:

Server domain or IP address.

port:

Servers port.

save:

(optional, boolean) if provided, saves the new connection parameters in the profile so they'll be used next time you open it.

Note: save is available in Mudlet 3.2+.

Example

connectToServer("midnightsun2.org", 3000)

-- save to disk so these parameters are used next time when opening the profile
connectToServer("midnightsun2.org", 3000, true)

disconnect

disconnect(): Disconnects you from the game right away. Note that this will not properly log you out of the game - use an ingame command for that. Such commands vary, but typically QUIT will work.

See also: reconnect()
Example

disconnect()

downloadFile

downloadFile(saveto, url): Downloads the resource at the given url into the saveto location on disk. This does not pause the script until the file is downloaded - instead, it lets it continue right away and downloads in the background. When a download is finished, the sysDownloadDone event is raised (with the saveto location as the argument), or when a download fails, the sysDownloadError event is raised with the reason for failure. You may call downloadFile multiple times and have multiple downloads going on at once - but they aren’t guaranteed to be downloaded in the same order that you started them in.

For privacy transparency, URLs accessed are logged in the Central Debug Console

Note: Since Mudlet 3.0, https downloads are supported and the actual url that was used for the download is returned - useful in case of redirects.

Example

-- just download a file and save it in our profile folder
local saveto = getMudletHomeDir().."/dark-theme-mudlet.zip"
local url = "http://www.mudlet.org/wp-content/files/dark-theme-mudlet.zip"
downloadFile(saveto, url)
cecho("<white>Downloading <green>"..url.."<white> to <green>"..saveto.."\n")

A more advanced example that downloads a webpage, reads it, and prints a result from it:

-- create a function to parse the downloaded webpage and display a result
function downloaded_file(_, filename)
  -- is the file that downloaded ours?
  if not filename:find("achaea-who-count.html", 1, true) then return end

  -- read the contents of the webpage in
  local f, s, webpage = io.open(filename)
  if f then webpage = f:read("*a"); io.close(f) end
  -- delete the file on disk, don't clutter
  os.remove(filename)

  -- parse our downloaded file for the player count
  local pc = webpage:match([[Total: (%d+) players online]])
  display("Achaea has "..tostring(pc).." players on right now.")
end

-- register our function to run on the event that something was downloaded
registerAnonymousEventHandler("sysDownloadDone", "downloaded_file")

-- download a list of fake users for a demo
downloadFile(getMudletHomeDir().."/achaea-who-count.html", "https://www.achaea.com/game/who")

Result should look like this:

.

getConnectionInfo

getConnectionInfo(): Returns the server address and port that you're currently connected to, and (in Mudlet 4.12+) true or false indicating if you're currently connected to a game.; See also: connectToServer()

Available in Mudlet4.2+

Example

local host, port, connected = getConnectionInfo()
cecho(string.format("<light_grey>Playing on <forest_green>%s:%s<light_grey>, currently connected? <forest_green>%s\n", host, port, tostring(connected)))

-- echo the new connection parameters whenever we connect to a different host with connectToServer()
function echoInfo()
    local host, port = getConnectionInfo()
    cecho(string.format("<light_grey>Now connected to <forest_green>%s:%s\n", host, port))
  end

registerAnonymousEventHandler("sysConnectionEvent", "echoInfo")

getIrcChannels

getIrcChannels(): Returns a list of channels the IRC client is joined to as a lua table. If the client is not yet started the value returned is loaded from disk and represents channels the client will auto-join when started.; See also: setIrcChannels()

Available in Mudlet3.3+

Example

display(getIrcChannels())
-- Prints: {"#mudlet", "#lua"}

getIrcConnectedHost

getIrcConnectedHost(): Returns true+host where host is a string containing the host name of the IRC server, as given to the client by the server while starting the IRC connection. If the client has not yet started or finished connecting this will return false and an empty string.

This function can be particularly useful for testing if the IRC client has connected to a server prior to sending data, and it will not auto-start the IRC client.

The hostname value this function returns can be used to test if sysIrcMessage events are sent from the server or a user on the network.

Example

local status, hostname = getIrcConnectedHost()

if status == true then
  -- do something with connected IRC, send IRC commands, store 'hostname' elsewhere.
  -- if sysIrcMessage sender = hostname from above, message is likely a status, command response, or an error from the Server.
else 
  -- print a status, change connection settings, or just continue waiting to send IRC data.
end

Available in Mudlet3.3+

getIrcNick

getIrcNick(): Returns a string containing the IRC client nickname. If the client is not yet started, your default nickname is loaded from IRC client configuration.; See also: setIrcNick()

Available in Mudlet3.3+

Example

local nick = getIrcNick()
echo(nick)
-- Prints: "Sheldor"

getIrcServer

getIrcServer(): Returns the IRC client server name and port as a string and a number respectively. If the client is not yet started your default server is loaded from IRC client configuration.; See also: setIrcServer()

Available in Mudlet3.3+

Example

local server, port = getIrcServer()
echo("server: "..server..", port: "..port.."\n")

getNetworkLatency

getNetworkLatency(): Returns the last measured response time between the sent command and the server reply in seconds - e.g. 0.058 (=58 milliseconds lag) or 0.309 (=309 milliseconds). This is the N: number you see bottom-right of Mudlet.

Also known as server lag.

Example

if getNetworkLatency() > 3 then
  send("say This game is soooo laggy!")
end

openUrl

openUrl (url): Opens the default OS browser for the given URL.

Example

openUrl("http://google.com")
openUrl("www.mudlet.org")

reconnect

reconnect(): Force-reconnects (so if you're connected, it'll disconnect) you to the game.

Example

-- you could trigger this on a log out message to reconnect, if you'd like
reconnect()

restartIrc

restartIrc(): Restarts the IRC client connection, reloading configurations from disk before reconnecting the IRC client.

Available in Mudlet3.3+

sendAll

sendAll(list of things to send, [echo back or not]): sends multiple things to the game. If you'd like the commands not to be shown, include false at the end.

sendATCP

sendATCP(message, what): Need description

Parameters

message:

The message that you want to send.

what:

Need description

Example

Need example

sendGMCP

sendGMCP(command): Sends a GMCP message to the server. The IRE document on GMCP has information about what can be sent, and what tables it will use, etcetera.; Note that this function is rarely used in practice. For most GMCP modules, the messages are automatically sent by the server when a relevant event happens in the game. For example, LOOKing in your room prompts the server to send the room description and contents, as well as the GMCP message gmcp.Room. A call to sendGMCP would not be required in this case.

When playing an IRE game, a call to send(" ") afterwards is necessary due to a bug in the game with compression (MCCP) is enabled.

Example

--This would send "Core.KeepAlive" to the server, which resets the timeout
sendGMCP("Core.KeepAlive")

--This would send a request for the server to send an update to the gmcp.Char.Skills.Groups table.
sendGMCP("Char.Skills.Get {}")

--This would send a request for the server to send a list of the skills in the 
--vision group to the gmcp.Char.Skills.List table.

sendGMCP("Char.Skills.Get " .. yajl.to_string{group = "vision"})

--And finally, this would send a request for the server to send the info for 
--hide in the woodlore group to the gmcp.Char.Skills.Info table

sendGMCP("Char.Skills.Get " .. yajl.to_string{group="MWP", name="block"})

sendIrc

sendIrc(target, message): Sends a message to an IRC channel or person. Returns true+status if message could be sent or was successfully processed by the client, or nil+error if the client is not ready for sending, and false+status if the client filtered the message or failed to send it for some reason. If the IRC client hasn't started yet, this function will initiate the IRC client and begin a connection.

To receive an IRC message, check out the sysIrcMessage event.

Note: Since Mudlet 3.3, auto-opens the IRC window and returns the success status.

Parameters

target:

nick or channel name and if omitted will default to the first available channel in the list of joined channels.

message:

The message to send, may contain IRC client commands which start with / and can use all commands which are available through the client window.

Example

-- this would send "hello from Mudlet!" to the channel #mudlet on freenode.net
sendIrc("#mudlet", "hello from Mudlet!")
-- this would send "identify password" in a private message to Nickserv on freenode.net
sendIrc("Nickserv", "identify password")

-- use an in-built IRC command
sendIrc("#mudlet", "/topic")

Note: The following IRC commands are available since Mudlet 3.3:

/ACTION <target> <message...>
/ADMIN (<server>)
/AWAY (<reason...>)
/CLEAR (<buffer>) -- Clears the text log for the given buffer name. Uses the current active buffer if none are given.
/CLOSE (<buffer>) -- Closes the buffer and removes it from the Buffer list. Uses the current active buffer if none are given.
/HELP (<command>) -- Displays some help information about a given command or lists all available commands.
/INFO (<server>)
/INVITE <user> (<#channel>)
/JOIN <#channel> (<key>)
/KICK (<#channel>) <user> (<reason...>)
/KNOCK <#channel> (<message...>)
/LIST (<channels>) (<server>)
/ME [target] <message...>
/MODE (<channel/user>) (<mode>) (<arg>)
/MOTD (<server>)
/MSG <target> <message...> -- Sends a message to target, can be used to send Private messages.
/NAMES (<#channel>)
/NICK <nick>
/NOTICE <#channel/user> <message...>
/PART (<#channel>) (<message...>)
/PING (<user>)
/RECONNECT -- Issues a Quit command to the IRC Server and closes the IRC connection then reconnects to the IRC server. The same as calling ircRestart() in Lua.
/QUIT (<message...>)
/QUOTE <command> (<parameters...>)
/STATS <query> (<server>)
/TIME (<user>)
/TOPIC (<#channel>) (<topic...>)
/TRACE (<target>)
/USERS (<server>)
/VERSION (<user>)
/WHO <mask>
/WHOIS <user>
/WHOWAS <user>

Note: The following IRC commands are available since Mudlet 3.15:

/MSGLIMIT <limit> (<buffer>) -- Sets the limit for messages to keep in the IRC client message buffers and saves this setting. If a specific buffer/channel name is given the limit is not saved and applies to the given buffer until the application is closed or the limit is changed again. For this reason, global settings should be applied first, before settings for specific channels/PM buffers.

sendMSDP

sendMSDP(variable[, value][, value...]): Sends a MSDP message to the server.

Parameters

variable:

The variable, in MSDP terms, that you want to request from the server.

value:

The variables value that you want to request. You can request more than one value at a time.

Example

-- ask for a list of commands, lists, and reportable variables that the server supports
sendMSDP("LIST", "COMMANDS", "LISTS", "REPORTABLE_VARIABLES")

-- ask the server to start keeping you up to date on your health
sendMSDP("REPORT", "HEALTH")

-- or on your health and location
sendMSDP("REPORT", "HEALTH", "ROOM_VNUM", "ROOM_NAME")

sendTelnetChannel102

sendTelnetChannel102(msg): Sends a message via the 102 subchannel back to the game (that's used in Aardwolf). The msg is in a two byte format; see the link below to the Aardwolf Wiki for how that works.

Example

-- turn prompt flags on:
sendTelnetChannel102("\52\1")

-- turn prompt flags off:
sendTelnetChannel102("\52\2")

To see the list of options that Aardwolf supports go to: Using Telnet negotiation to control MUD client interaction.

setIrcChannels

setIrcChannels(channels): Saves the given channels to disk as the new IRC client channel auto-join configuration. This value is not applied to the current active IRC client until it is restarted with restartIrc(); See also: getIrcChannels(), restartIrc()

Parameters

channels:

A table containing strings which are valid channel names. Any channels in the list which aren't valid are removed from the list.

Available in Mudlet3.3+

Example

setIrcChannels( {"#mudlet", "#lua", "irc"} )
-- Only the first two will be accepted, as "irc" is not a valid channel name.

setIrcNick

setIrcNick(nickname): Saves the given nickname to disk as the new IRC client configuration. This value is not applied to the current active IRC client until it is restarted with restartIrc(); See also: getIrcNick(), restartIrc()

Parameters

nickname:

A string with your new desired name in IRC.

Available in Mudlet3.3+

Example

setIrcNick( "Sheldor" )

setIrcServer

setIrcServer(hostname, port[, secure]): Saves the given server's address to disk as the new IRC client connection configuration. These values are not applied to the current active IRC client until it is restarted with restartIrc(); See also: getIrcServer(), restartIrc()

Parameters

hostname:

A string containing the hostname of the IRC server.

port:

(optional) A number indicating the port of the IRC server. Defaults to 6667, if not provided.

secure:

(optional) Boolean, true if server uses Transport Layer Security. Defaults to false.

Available in Mudlet3.3+

Example

setIrcServer("irc.libera.chat", 6667)

getHTTP

getHTTP(url, headersTable): Sends an HTTP GET request to the given URL. Raises sysGetHttpDone on success or sysGetHttpError on failure.; See also: downloadFile().

For privacy transparency, URLs accessed are logged in the Central Debug Console

Parameters

url:

Location to send the request to.

headersTable:

(optional) table of headers to send with your request.

Available in Mudlet4.10+

Examples

function onHttpGetDone(_, url, body)
  cecho(string.format("<white>url: <dark_green>%s<white>, body: <dark_green>%s", url, body))
end

registerAnonymousEventHandler("sysGetHttpDone", onHttpGetDone)

getHTTP("https://httpbin.org/info")
getHTTP("https://httpbin.org/are_you_awesome", {["X-am-I-awesome"] = "yep I am"})

-- Status requests typically use GET requests
local url = "http://postman-echo.com/status"
local header = {["Content-Type"] = "application/json"}

-- first we create something to handle the success, and tell us what we got
registerAnonymousEventHandler('sysGetHttpDone', function(event, rurl, response)
  if rurl == url then display(r) else return true end -- this will show us the response body, or if it's not the right url, then do not delete the handler
end, true) -- this sets it to delete itself after it fires
-- then we create something to handle the error message, and tell us what went wrong
registerAnonymousEventHandler('sysGetHttpError', function(event, response, rurl)
  if rurl == url then display(r) else return true end -- this will show us the response body, or if it's not the right url, then do not delete the handler
end, true) -- this sets it to delete itself after it fires

-- Lastly, we make the request:
getHTTP(url, header)

-- Pop this into an alias and try it yourself!

postHTTP

postHTTP(dataToSend, url, headersTable, file): Sends an HTTP POST request to the given URL, either as text or with a specific file you'd like to upload. Raises sysPostHttpDone on success or sysPostHttpError on failure.; See also: downloadFile(), getHTTP(), putHTTP(), deleteHTTP().

For privacy transparency, URLs accessed are logged in the Central Debug Console

Parameters

dataToSend:

Text to send in the request (unless you provide a file to upload).

url:

Location to send the request to.

headersTable:

(optional) table of headers to send with your request.

file:

(optional) file to upload as part of the POST request. If provided, this will replace 'dataToSend'.

If you use a scripting language (ex. PHP) to handle this post, remember that the file is sent as raw data. Expecially no field name is provided, dispite it works in common html post.

Available in Mudlet4.1+

Examples

function onHttpPostDone(_, url, body)
  cecho(string.format("<white>url: <dark_green>%s<white>, body: <dark_green>%s", url, body))
end

registerAnonymousEventHandler("sysPostHttpDone", onHttpPostDone)

postHTTP("why hello there!", "https://httpbin.org/post")
postHTTP("this us a request with custom headers", "https://httpbin.org/post", {["X-am-I-awesome"] = "yep I am"})
postHTTP(nil, "https://httpbin.org/post", {}, "<fill in file location to upload here, maybe get from invokeFileDialog>")

-- This will create a JSON message body. Many modern REST APIs expect a JSON body. 
local url = "http://postman-echo.com/post"
local data = {message = "I am the banana", user = "admin"}
local header = {["Content-Type"] = "application/json"}

-- first we create something to handle the success, and tell us what we got
registerAnonymousEventHandler('sysPostHttpDone', function(event, rurl, response)
  if rurl == url then display(response) else return true end -- this will show us the response body, or if it's not the right url, then do not delete the handler
end, true) -- this sets it to delete itself after it fires

-- then we create something to handle the error message, and tell us what went wrong
registerAnonymousEventHandler('sysPostHttpError', function(event, response, rurl)
  if rurl == url then display(response) else return true end -- this will show us the response body, or if it's not the right url, then do not delete the handler
end, true) -- this sets it to delete itself after it fires

-- Lastly, we make the request:
postHTTP(yajl.to_string(data), url, header) -- yajl.to_string converts our Lua table into a JSON-like string so the server can understand it

-- Pop this into an alias and try it yourself!

HTTP Basic Authentication Example

If your HTTP endpoint requires authentication to post data, HTTP Basic Authentication is a common method for doing so. There are two ways to do so.

OPTION 1: URL encoding: Many HTTP servers allow you to enter a HTTP Basic Authentication username and password at the beginning of the URL itself, in format: https://username:password@domain.com/path/to/endpoint

OPTION 2: Authorization Header: Some HTTP servers may require you to put your Basic Authentication into the 'Authorization' HTTP header value.

This requires encoding the username:password into base64. For example, if your username is 'user' and your password is '12345', you'd need to run the string "user:12345" through a base64 encoder, which would result in the string: dXNlcjoxMjM0NQ==

Then, you'd need to set the HTTP header 'Authorization' field value to indicate it is using Basic auth and inserting the base64 string as: ['Authorization'] = "Basic dXNlcjoxMjM0NQ=="

As you're encoding your username and password, you probably want to do this encoding locally for security reasons. You also probably want to only use https:// and not http:// when sending usernames and passwords over the internet.

In the HTTP Basic Authentication example below, there is an inline base64Encode() function included:

function base64Encode(data)
  -- Lua 5.1+ base64 v3.0 (c) 2009 by Alex Kloss <alexthkloss@web.de>
  -- licensed under the terms of the LGPL2
  local b = 'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/'
    return ((data:gsub('.', function(x) 
        local r,b='',x:byte()
        for i=8,1,-1 do r=r..(b%2^i-b%2^(i-1)>0 and '1' or '0') end
        return r;
    end)..'0000'):gsub('%d%d%d?%d?%d?%d?', function(x)
        if (#x < 6) then return '' end
        local c=0
        for i=1,6 do c=c+(x:sub(i,i)=='1' and 2^(6-i) or 0) end
        return b:sub(c+1,c+1)
    end)..({ '', '==', '=' })[#data%3+1])
end
-- Example: base64Encode("user:12345") -> dXNlcjoxMjM0NQ== 

function postJSON(url,dataTable,headerTable)
  -- This will create a JSON message body. Many modern REST APIs expect a JSON body. 
  local data = dataTable or {text = "hello world"}
  local header = headerTable or {["Content-Type"] = "application/json"}
  -- first we create something to handle the success, and tell us what we got
  registerAnonymousEventHandler('sysPostHttpDone', function(event, rurl, response)
    if rurl == url then sL("HTTP response success"); echo(response) else return true end -- this will show us the response body, or if it's not the right url, then do not delete the handler
  end, true) -- this sets it to delete itself after it fires
  -- then we create something to handle the error message, and tell us what went wrong
  registerAnonymousEventHandler('sysPostHttpError', function(event, response, rurl)
    if rurl == url then sL("HTTP response error",3); echo(response) else return true end -- this will show us the response body, or if it's not the right url, then do not delete the handler
  end, true) -- this sets it to delete itself after it fires
  -- Lastly, we make the request:
  postHTTP(yajl.to_string(data), url, header) -- yajl.to_string converts our Lua table into a JSON-like string so the server can understand it
end

data = {
    message = "I am the banana",
    user = "admin"
}
header = {
    ["Content-Type"] = "application/json",
    ["Authorization"] = "Basic " .. base64Encode("user:12345")
}
postJSON("http://postman-echo.com/post",data,header)

URL Encoding vs JSON encoding

Some HTTP endpoints may not support JSON encoding, and instead may require URL encoding. Here's an example function to convert your lua data table into a URL encoded string::

-- Example: URLEncodeTable({message="hello",person="world"}) -> "message=hello&person=world"

function URLEncodeTable(Args)
  -- From: https://help.interfaceware.com/code/details/urlcode-lua
  ----------------------------------------------------------------------------
  -- URL-encode the elements of a table creating a string to be used in a
  -- URL for passing data/parameters to another script
  -- @param args Table where to extract the pairs (name=value).
  -- @return String with the resulting encoding.
  ----------------------------------------------------------------------------
  --
  local ipairs, next, pairs, tonumber, type = ipairs, next, pairs, tonumber, type
  local string = string
  local table = table
  
  --helper functions: 
  ----------------------------------------------------------------------------
  -- Decode an URL-encoded string (see RFC 2396)
  ----------------------------------------------------------------------------
  local unescape = function (str)
     str = string.gsub (str, "+", " ")
     str = string.gsub (str, "%%(%x%x)", function(h) return string.char(tonumber(h,16)) end)
     return str
  end
   
  ----------------------------------------------------------------------------
  -- URL-encode a string (see RFC 2396)
  ----------------------------------------------------------------------------
  local escape = function (str)
     str = string.gsub (str, "([^0-9a-zA-Z !'()*._~-])", -- locale independent
        function (c) return string.format ("%%%02X", string.byte(c)) end)
     str = string.gsub (str, " ", "+")
     return str
  end
   
  ----------------------------------------------------------------------------
  -- Insert a (name=value) pair into table [[args]]
  -- @param args Table to receive the result.
  -- @param name Key for the table.
  -- @param value Value for the key.
  -- Multi-valued names will be represented as tables with numerical indexes
  -- (in the order they came).
  ----------------------------------------------------------------------------
  local insertfield = function (args, name, value)
     if not args[name] then
        args[name] = value
     else
        local t = type (args[name])
        if t == "string" then
           args[name] = {args[name],value,}
        elseif t == "table" then
           table.insert (args[name], value)
        else
           error ("CGILua fatal error (invalid args table)!")
        end
     end
  end
  -- end helper functions 
    
  if Args == nil or next(Args) == nil then -- no args or empty args?
    return ""
  end
  local strp = ""
  for key, vals in pairs(Args) do
    if type(vals) ~= "table" then
       vals = {vals}
    end
    for i,val in ipairs(vals) do
       strp = strp.."&"..key.."="..escape(val)
    end
  end
  -- remove first &
  return string.sub(strp,2)
end

putHTTP

putHTTP(dataToSend, url, [headersTable], [file]): Sends an HTTP PUT request to the given URL, either as text or with a specific file you'd like to upload. Raises sysPutHttpDone on success or sysPutHttpError on failure.; See also: downloadFile(), getHTTP(), postHTTP(), deleteHTTP().

For privacy transparency, URLs accessed are logged in the Central Debug Console

Parameters

dataToSend:

Text to send in the request (unless you provide a file to upload).

url:

Location to send the request to.

headersTable:

(optional) table of headers to send with your request.

file:

(optional) file to upload as part of the PUT request. If provided, this will replace 'dataToSend'.

Available in Mudlet4.1+

Example

function onHttpPutDone(_, url, body)
  cecho(string.format("<white>url: <dark_green>%s<white>, body: <dark_green>%s", url, body))
end

registerAnonymousEventHandler("sysPutHttpDone", onHttpPutDone)
putHTTP("this us a request with custom headers", "https://httpbin.org/put", {["X-am-I-awesome"] = "yep I am"})
putHTTP("https://httpbin.org/put", "<fill in file location to upload here>")

deleteHTTP

deleteHTTP(url, headersTable): Sends an HTTP DELETE request to the given URL. Raises sysDeleteHttpDone on success or sysDeleteHttpError on failure.; See also: downloadFile(), getHTTP(), postHTTP(), putHTTP().

For privacy transparency, URLs accessed are logged in the Central Debug Console

Parameters

url:

Location to send the request to.

headersTable:

(optional) table of headers to send with your request.

Available in Mudlet4.1+

Example

function onHttpDeleteDone(_, url, body)
  cecho(string.format("<white>url: <dark_green>%s<white>, body: <dark_green>%s", url, body))
end

registerAnonymousEventHandler("sysDeleteHttpDone", onHttpDeleteDone)

deleteHTTP("https://httpbin.org/delete")
deleteHTTP("https://httpbin.org/delete", {["X-am-I-awesome"] = "yep I am"})

customHTTP

customHTTP(method, url, headersTable): Sends an custom method request to the given URL. Raises sysCustomHttpDone on success or sysCustomHttpError on failure.; See also: downloadFile(), getHTTP(), postHTTP(), putHTTP(), deleteHTTP().

Parameters

method:

Http method to use (eg. PATCH, HEAD etc.)

dataToSend:

Text to send in the request (unless you provide a file to upload).

url:

Location to send the request to.

headersTable:

(optional) table of headers to send with your request.

file:

(optional) file to upload as part of the PUT request. If provided, this will replace 'dataToSend'.

Available in Mudlet4.11+

Example

function onCustomHttpDone(_, url, body, method)
  cecho(string.format("<white>url: <dark_green>%s<white>, body: <dark_green>%s<white>, method: <dark_green>%s", url, body, method))
end

registerAnonymousEventHandler("sysCustomHttpDone", sysCustomHttpDone)

customHTTP("PATCH", "this us a request with custom headers", "https://httpbin.org/put", {["X-am-I-awesome"] = "yep I am"})
customHTTP("PATCH", "https://httpbin.org/put", "<fill in file location to upload here>")

String Functions

A collection of functions used to manipulate strings.

addWordToDictionary

addWordToDictionary(word): Adds the given word to the custom profile or shared dictionary (whichever is selected in preferences).

Returns true on success (the word was actually added to the dictionary by this call) and nil+msg on error - including if the word was already there - this is so that if you have other scripts that you wish to run when a word was added you can make their execution conditional on success here.

cecho2string

plainText = cecho2string(formattedText)

Strips the text formatting from the string passed in, leaving behind only the text.

See also: ansi2string(), hecho2string()

Available in Mudlet4.15+

Parameters

formattedText:

The string you want to strip the formatting codes from

Returns

The string with the formatting codes stripped out.

Example

local exampleString = "<red>Formatted <b>string</b>"
local plainText = cecho2string(exampleString)
-- "Formatted string"

decho2string

plainText = decho2string(formattedText)

Strips the text formatting from the string passed in, leaving behind only the text.

See also: ansi2string(), cecho2string()

Available in Mudlet4.15+

Parameters

formattedText:

The string you want to strip the formatting codes from

Returns

The string with the formatting codes stripped out.

Example

local exampleString = "<255,0,0>Formatted <b>string</b>"
local plainText = decho2string(exampleString)
-- "Formatted string"

f

formattedString = f(str): Allows you to combine variables and functions into text (string interpolation) using {}.

Parameters

str:

The string to perform interpolation against.

Available in Mudlet4.11+

Note: Using f is slower than using concatenation with the '..' operator by a fair bit, due to the way it has to gather scope for supporting local variables. For aliases or single calls this isn't so bad, but if you're looping a large table and building a string then f's slowness will really start to show and bring performance down.

Example

-- old way:
cecho("\nHello, "..matches[2]..", how is it going?")

-- new way:
cecho(f("\nHello {matches[2]}, how is it going?"))

testResult = "successful"
-- old way:
echo("The test was "..testResult.."\n")
-- with f:
echo(f("The test was {testResult}\n"))
-- echoes "The test was successful\n"

local testResult = "a failure"
echo(f("The test was {testResult}\n"))
-- echoes "The test was a failure\n" as it sees the local scope over global.

-- You can also execute simple expressions
echo(f("2 + 2 = {2 + 2}\n"))
-- echoes "2 + 2 = 4\n"

-- Or more complicated ones
local function testFunc(item)
  return item:title()
end

echo(f("You should properly capitalize names, such as {testFunc('marilyn')}\n"))
-- echoes "You should properly capitalize names, such as Marilyn\n"

echo(f("You should properly capitalize names, such as {string.title('robert')}\n")
-- same thing, but uses string.title directly and Robert instead of Marilyn

Caution! When using within closures, might not resolve variables correctly if they go out of a scope when closure is called.

function formatter2000()
  local upvalue = "2000"
  local formatter = function() 
    echo(f("Let's evaluate: {upvalue}\n"))
  end
  formatter() -- here evaulation inside f function will work
  return formatter
end

formatter2000()() -- here evaluation inside f function will return nil
-- result
-- Let's evaluate: 2000
-- Let's evaulate: nil

You can work around this by doing the following

function formatter2000()
  local upvalue = "2000"
  local formatter = function()
    local upvalue = upvalue  -- this keeps upvalue in scope for the function later
    echo(f("Let's evaluate: {upvalue}\n"))
  end
  formatter() -- here evaulation inside f function will work
  return formatter
end

formatter2000()() -- here evaluation inside f function will return 2000 once again

-- result
-- Let's evaluate: 2000
-- Let's evaulate: 2000

getDictionaryWordList

getDictionaryWordList(): Returns the profile or shared custom dictionary word list (whichever is selected in preferences) - that is, words added via right-click "add word to dictionary" or addWordToDictionary().

Returns an indexed table of words.

Available in Mudlet3.18+

Example

display(getDictionaryWordList())

hecho2string

plainText = hecho2string(formattedText)

Strips the text formatting from the string passed in, leaving behind only the text.

See also: ansi2string(), decho2string()

Available in Mudlet4.15+

Parameters

formattedText:

The string you want to strip the formatting codes from

Returns

The string with the formatting codes stripped out.

Example

local exampleString = "#ff0000Formatted #bstring#/b"
local plainText = cecho2string(exampleString)
-- "Formatted string"

removeWordFromDictionary

removeWordFromDictionary(word): Removed the given word to the custom profile or shared dictionary (whichever is selected in preferences).

Returns true on success (if the word was present and removed by this call) and nil+msg on error.

spellCheckWord

spellCheckWord(word, [customDictionary]): Spellchecks the given word against the custom or the system dictionary.

Returns true if the word is spelled correctly or false if it's not, and nil+msg on error.

Parameters

word: word to spellcheck.
customDictionary (optional): dictionary to use. If true, the profile or shared dictionary will be used (depending on your settings). If omitted or false, the system dictionary (the language you have selected in settings) will be used.

Available in Mudlet3.18+

Example

-- spellcheck against the language dictionary
if spellCheckWord("run") then
  echo("'run' is spelled ok!\n")
end

-- spellcheck against the custom 'add word to dictionary'
if spellCheckWord("Darkwind", true) then
  echo("'Darkwind' is spelled OK!\n")
end

spellSuggestWord

spellSuggestWord(word, [customDictionary]): Suggests similar words for the given word.

Returns a table of suggestions or nil+msg on error.

string.byte, utf8.byte

string.byte(string [, i [, j]]) or utf8.byte(string [, i [, j]])
mystring:byte([, i [, j]]): Returns the internal numerical codes of the characters s[i], s[i+1], ···, s[j]. The default value for i is 1; the default value for j is i.; Note that numerical codes are not necessarily portable across platforms.; string.byte() works with English text only, use utf8.byte() for the international version.; See also: string.char, utf8.char

Example

-- the following call will return the ASCII values of "A", "B" and "C"
a, b, c = string.byte("ABC", 1, 3)
echo(a .. " - " .. b .. " - " .. c) -- shows "65 - 66 - 67"

-- same for the international version but with the Unicode values
a, b, c = utf8.byte("дом", 1, 3)
echo(a .. " - " .. b .. " - " .. c) -- shows "1076 - 1086 - 1084"

string.char, utf8.char

string.char(···) or utf8.char(···): Receives zero or more integers. Returns a string with length equal to the number of arguments, in which each character has the internal numerical code equal to its corresponding argument.; Note that numerical codes are not necessarily portable across platforms.; string.char() works with English text only, use utf8.char() for the international version.; See also: string.byte, utf8.byte

Example

-- the following call will return the string "ABC" corresponding to the ASCII values 65, 66, 67
mystring = string.char(65, 66, 67)

-- same for the infernational version which will return text "дом" for the Unicode values 1076, 1086, 1084
mystring = utf8.char(1076,1086,1084)
print(mystring)

string.cut

string.cut(string, maxLen): Cuts string to the specified maximum length.; Returns the modified string.

Parameters

string:

The text you wish to cut. Passed as a string.

maxLen:

The maximum length you wish the string to be. Passed as an integer number.

string.dump

string.dump()

Converts a function into a binary string. You can use the loadstring() function later to get the function back.

string.dump() works with both English and non-English text fine.
Example

testString = string.dump(function() echo("this is a string") end)
--The following should then echo "this is a string"
loadstring(testString)()

string.enclose

string.enclose(string): Wraps a string with [[ ]]; Returns the altered string.

Parameters

String:

The string to enclose. Passed as a string.

Example

--This will echo '[[Oh noes!]]' to the main window
echo("'" .. string.enclose("Oh noes!") .. "'")

string.ends

string.ends(String, Suffix): Test if string is ending with specified suffix.; Returns true or false.; See also: string.starts

Parameters

String:

The string to test. Passed as a string.

Suffix:

The suffix to test for. Passed as a string.

Example

--This will test if the incoming line ends with "in bed" and if not will add it to the end.
if not string.ends(line, "in bed") then
  echo("in bed\n")
end

string.find, utf8.find

string.find(text, pattern [, init [, plain]]) or utf8.find: Looks for the first match of pattern in the string text. If it finds a match, then find returns the indices of text where this occurrence starts and ends; otherwise, it returns nil. A third, optional numerical argument init specifies where to start the search; its default value is 1 and can be negative. A value of true as a fourth, optional argument plain turns off the pattern matching facilities, so the function does a plain "find substring" operation, with no characters in pattern being considered "magic". Note that if plain is given, then init must be given as well.

If the pattern has captures, then in a successful match the captured values are also returned, after the two indices.

string.find() works with English text only, use utf8.find() for the international version.
Example

-- check if the word appears in a variable
if string.find(matches[2], "rabbit") then
  echo("Found a rabbit!\n")
end

-- the following example will print: "3, 4"
local start, stop = string.find("This is a test.", "is")
if start then
   print(start .. ", " .. stop)
end
-- note that here "is" is being found at the end of the word "This", rather than the expected second word

-- to make it match the word on its own, prefix %f[%a] and suffix %f[%A]
if string.find("This is a test", "%f[%a]is%f[%A]") then
  echo("This 'is' is the actual stand-alone word\n")
end

Return value:

nil or start and stop position of the first matched text, followed by any captured text.

string.findPattern

string.findPattern(text, pattern): Return first matching substring or nil.

Parameters

text:

The text you are searching the pattern for.

pattern:

The pattern you are trying to find in the text.

Example

Following example will print: "I did find: Troll" string.

local match = string.findPattern("Troll is here!", "Troll")
if match then
   echo("I did find: " .. match)
end

This example will find substring regardless of case.

local match = string.findPattern("Troll is here!", string.genNocasePattern("troll"))
if match then
    echo("I did find: " .. match)
end

Return value:

nil or first matching substring

string.format

string.format(formatstring,...): Returns a formatted version of its variable number of arguments following the description given in its first argument (which must be a string). The format string follows the same rules as the printf family of standard C functions. The only differences are that the options/modifiers *, l, L, n, p, and h are not supported and that there is an extra option, q. The q option formats a string in a form suitable to be safely read back by the Lua interpreter: the string is written between double quotes, and all double quotes, newlines, embedded zeros, and backslashes in the string are correctly escaped when written. For instance, the call

string.format('%q', 'a string with "quotes" and \n new line')

will produce the string:

     "a string with \"quotes\" and \
      new line"

The options c, d, E, e, f, g, G, i, o, u, X, and x all expect a number as argument, whereas q and s expect a string.

This function does not accept string values containing embedded zeros, except as arguments to the q option.

string.format() works fine with both English and non-English text.

Example

some_data = "MudletUser1"

-- pad data 20 characters wide to the left
display(string.format("%20s", some_data))
-- result: "         MudletUser1"

-- pad same data but instead to the the right
display(string.format("%-20s", some_data))
-- result: "MudletUser1         "

-- pad but first truncate data to 6 characters
display(string.format("%20s", string.sub(some_data, 1, 6)))
-- result: "              Mudlet"

string.genNocasePattern

string.genNocasePattern(template): Generate case insensitive search pattern from string.

Parameters

template: The original string to be used as the base.

Example

echo(string.genNocasePattern("123abc"))
-- result: "123[aA][bB][cC]"

string.gfind

string.gfind(): This is an old version of what is now string.gmatch. Use string.gmatch instead.

string.gmatch, utf8.gmatch

string.gmatch(text, pattern) or utf8.gmatch: Returns an iterator function that, each time it is called, returns the next captures from pattern over string text. If pattern specifies no captures, then the whole match is produced in each call.

Example

As an example, the following loop

     s = "hello world from Lua"
     for w in string.gmatch(s, "%a+") do
       print(w)
     end

will iterate over all the words from string s, printing one per line. The next example collects all pairs key=value from the given string into a table:

     t = {}
     s = "from=world, to=Lua"
     for k, v in string.gmatch(s, "(%w+)=(%w+)") do
       t[k] = v
     end

For this function, a '^' at the start of a pattern does not work as an anchor, as this would prevent the iteration.

string.gmatch() works with English text only, use utf8.gmatch() for the international version.

string.gsub, utf8.gsub

string.gsub(text, pattern, repl [, n]) or utf8.gsub: Returns a copy of text in which all (or the first n, if given) occurrences of the pattern have been replaced by a replacement string specified by repl, which can be a string, a table, or a function. gsub also returns, as its second value, the total number of matches that occurred.

If repl is a string, then its value is used for replacement. The character % works as an escape character: any sequence in repl of the form %n, with n between 1 and 9, stands for the value of the n-th captured substring (see below). The sequence %0 stands for the whole match. The sequence %% stands for a single %.

If repl is a table, then the table is queried for every match, using the first capture as the key; if the pattern specifies no captures, then the whole match is used as the key.

If repl is a function, then this function is called every time a match occurs, with all captured substrings passed as arguments, in order; if the pattern specifies no captures, then the whole match is passed as a sole argument.

If the value returned by the table query or by the function call is a string or a number, then it is used as the replacement string; otherwise, if it is false or nil, then there is no replacement (that is, the original match is kept in the string).

string.gsub() works with English text only, use utf8.gsub() for the international version.
Example

     x = string.gsub("hello world", "(%w+)", "%1 %1")
     --> x="hello hello world world"
     
     x = string.gsub("hello world", "%w+", "%0 %0", 1)
     --> x="hello hello world"
     
     x = string.gsub("hello world from Lua", "(%w+)%s*(%w+)", "%2 %1")
     --> x="world hello Lua from"
     
     x = string.gsub("home = $HOME, user = $USER", "%$(%w+)", os.getenv)
     --> x="home = /home/roberto, user = roberto"
     
     x = string.gsub("4+5 = $return 4+5$", "%$(.-)%$", function (s)
           return loadstring(s)()
         end)
     --> x="4+5 = 9"
     
     local t = {name="lua", version="5.1"}
     x = string.gsub("$name-$version.tar.gz", "%$(%w+)", t)
     --> x="lua-5.1.tar.gz"

string.len, utf8.len

string.len(string) or utf8.len(string)
mystring:len(): Receives a string and returns its length. The empty string "" has length 0. Embedded zeros are counted, so "a\000bc\000" has length 5.; string.len() works with English text only, use utf8.len() for the international version.

Parameters

string:

The string (text) you want to find the length of.

Example

-- prints 5 for the 5 letters in our word
print(string.len("hello"))

-- international version
print(utf8.len("слово"))

string.lower, utf8.lower

string.lower(string) or utf8.lower(string)
mystring:lower(): Receives a string and returns a copy of this string with all uppercase letters changed to lowercase. All other characters are left unchanged. The definition of what an uppercase letter is depends on the current locale.; string.lower() works with English text only, use utf8.lower() for the international version.; See also: string.upper, utf8.upper

Example

-- prints an all-lowercase version
print(string.lower("No way! This is AWESOME!"))

-- international version
print(utf8.lower("Класс! Ето ОТЛИЧНО!"))

string.match, utf8.match

string.match(text, pattern [, init]) or utf8.match(): Looks for the first match of pattern in the string text. If it finds one, then match returns the captures from the pattern; otherwise it returns nil. If pattern specifies no captures, then the whole match is returned. A third, optional numerical argument init specifies where to start the search; its default value is 1 and can be negative.; string.match() works with English text only, use utf8.match() for the international version.
Example

-- match some numbers
local age = string.match("I am 100 years old.", "%d+"))
echo("Wow, " .. age .. " years old.")

string.patternEscape, utf8.patternEscape

escapedString = string.patternEscape(str) or escapedString = utf8.patternEscape(str)

Returns a version of str with all Lua pattern characters escaped to ensure string.match/find/etc look for the original str.

See also: string.trim(), string.genNocasePattern()

Available in Mudlet4.15+

Parameters

str:

The string to escape lua pattern characters in.

Returns

The string with all special Lua pattern characters escaped.

Example

-- searching for a url inside of a string. 
local helpString = [[
This feature can be accessed by going to https://some-url.com/athing.html?param=value and
retrieving the result!
]]
local url = "https://some-url.com/"
display(helpString:find(url))
-- nil
display(helpString:find(string.patternEscape(url)))
-- 42
-- 62
display(url:patternEscape())
-- "https://some%-url%.com/"

string.rep

string.rep(String, n)
mystring:rep(n): Returns a string that is the concatenation of n copies of the string String.; string.rep() works with both English and non-English text fine.

Example

-- repeat * 10 times
display(string.rep("*", 10))
-- results in:
**********

-- do the same thing, but this time calling from a variable
s = "*"
display(s:rep(10))
-- results in:
**********

string.reverse, utf8.reverse

string.reverse(string) or utf8.reverse(string)
mystring:reverse()

Returns a string that is the string string reversed.

string.reverse() works with English text only, use utf8.reverse() for the international version.

Parameters

string:

The string to reverse. Passed as a string.

Example

mystring = "Hello from Lua"
echo(mystring:reverse()) -- displays 'auL morf olleH'

-- international version.
mystring = "Привет от Луа!"
echo(utf8.reverse(mystring)) -- displays '!ауЛ то тевирП', which probably looks the same to you

string.split

string.split(string, delimiter)
myString:split(delimiter): Splits a string into a table by the given delimiter. Can be called against a string (or variable holding a string) using the second form above.; Returns a table containing the split sections of the string.

Parameters

string:

The string to split. Parameter is not needed if using second form of the syntax above. Passed as a string.

delimiter:

The delimiter to use when splitting the string. Passed as a string, and allows for Lua pattern types. Use % to escape here (and %% to escape a stand-alone %).

Version Information

Note: as of Mudlet 4.7+, delimiter will default to " " if not provided.

Note: as of Mudlet 4.7+, using "" (empty string) for the delimiter will return the string as a table of characters. IE string.split("This","") will return as {"T", "h", "i", "s"}. Prior to 4.7 using empty string as the delimiter would error after hanging temporarily.

Example

-- This will split the string by ", " delimiter and print the resulting table to the main window.
names = "Alice, Bob, Peter"
name_table = string.split(names, ", ")
display(name_table)

--The alternate method
names = "Alice, Bob, Peter"
name_table = names:split(", ")
display(name_table)

Either method above will print out:

table {

1: 'Alice'

2: 'Bob'

3: 'Peter'

}

string.starts

string.starts(string, prefix): Test if string is starting with specified prefix.; Returns true or false; See also: string.ends

Parameters

string:

The string to test. Passed as a string.

prefix:

The prefix to test for. Passed as a string.

Example

--The following will see if the line begins with "You" and if so will print a statement at the end of the line
if string.starts(line, "You") then
  echo("====oh you====\n")
end

string.sub, utf8.sub

string.sub(text, i [, j]) or utf8.sub(): Returns the substring of text that starts at i and continues until j; i and j can be negative. If j is absent, then it is assumed to be equal to -1 (which is the same as the string length). In particular, the call string.sub(text,1,j) returns a prefix of text with length j, and string.sub(text, -i) returns a suffix of text with length i.; string.sub() works with English text only, use utf8.sub() for the international version.
Example

local sub = string.sub("Twinkle, twinkle, little star.", 19)  -- returns: little star.
echo(sub)

sub = string.sub("Twinkle, twinkle, little star.", 10, 16)  -- returns: twinkle
echo(sub)

string.title

string.title(string)
mystring:title(): Capitalizes the first character in a string.; Returns the altered string.

Parameters

string:

The string to modify. Not needed if you use the second form of the syntax above.

Example

--Variable testname is now Anna.
testname = string.title("anna")
--Example will set test to "Bob".
test = "bob"
test = test:title()

string.trim

string.trim(string): Trims string, removing all 'extra' white space at the beginning and end of the text.; Returns the altered string.

Parameters

string:

The string to trim. Passed as a string.

Example

--This will print 'Troll is here!', without the extra spaces.
local str = string.trim("  Troll is here!  ")
echo("'" .. str .. "'")

string.upper, utf8.upper

string.upper(string) or utf8.upper(string)
mystring:upper(): Receives a string and returns a copy of this string with all lowercase letters changed to uppercase. All other characters are left unchanged. The definition of what a lowercase letter is depends on the current locale.; string.upper() works with English text only, use utf8.upper() for the international version.

utf8.charpos

utf8.charpos(string[[, charpos], offset]): Converts UTF-8 position to byte offset, returns the character position and code point. If only offset is given, returns byte offset of this UTF-8 char index. If charpos and offset is given, a new charpos will be calculated by adding/subtracting UTF-8 char offset to current charpos. In all cases, it return a new char position, and code point (a number) at this position.

Parameters

string:

The input string to work on.

charpos:

(optional) character position to work on.

offset:

(optional) offset (as a number) to work on.

utf8.escape

utf8.escape(string): Escape a string to UTF-8 format string. It support several escape formats:

%ddd - which ddd is a decimal number at any length:

      change Unicode code point to UTF-8 format.

%{ddd} - same as %nnn but has bracket around. %uddd - same as %ddd, u stands Unicode %u{ddd} - same as %{ddd} %xhhh - hexadigit version of %ddd %x{hhh} same as %xhhh. %? - '?' stands for any other character: escape this character.

Parameters

string:

The string you want to escape

Example

local u = utf8.escape
print(u"%123%u123%{123}%u{123}%xABC%x{ABC}")
print(u"%%123%?%d%%u")

utf8.fold

utf8.fold(string): Returns the lowercase version of the string for use in case-insensitive comparisons. If string is a number, it's treated as a code point and the converted code point is returned (as a number).

Parameters

string:

The string to lowercase.

Example

print(utf8.fold("ПРИВЕТ")) -- 'привет'
print(utf8.fold("Привет")) -- 'привет'

utf8.insert

utf8.insert(string[, idx], substring): Inserts the substring into the given string. If idx is given, inserts substring before the character at this index, otherwise the substring will append onto the end of string. idx can be negative.

Parameters

string:

The input string to work on.

idx:

(optional) character position to insert the string at.

substring:

text to insert into the substring.

Example

-- inserts letter я before the 2nd letter and prints 'мясо'
print(utf8.insert("мсо", 2, "я"))

utf8.ncasecmp

utf8.ncasecmp(a, b): Compares a and b without case. Return -1 means a < b, 0 means a == b and 1 means a > b.

Parameters

a:

String to compare.

b:

String to compare against.

utf8.next

utf8.next(string[, charpos[, offset]]): Iterates though the UTF-8 string.

Parameters

string:

The input string to work on.

charpos:

(optional) character position to work on.

offset:

(optional) offset (as a number) to work on.

Example

-- prints location and code point of every letter
for pos, code in utf8.next, "тут есть текст" do
   print(pos, code)
end

utf8.remove

utf8.remove(string[, start[, stop]]): Removes characters from the given string. Deletes characters from the given start to the end of the string. If stop is given, deletes characters from start to stop (including start and stop). start and stop can be negative.

Parameters

string:

The input string to work on.

start:

position to start deleting characters from.

stop:

(optional) posititon to stop deleting characters at.

Example

-- delete everything from the 3rd character including the character itself
print(utf8.remove("мясо", 3)) -- 'мя'

-- delete the last character, use negative to count backwards
print(utf8.remove("мясо", -1)) -- 'мяс'

-- delete everything from the 2nd to the 4th character
print(utf8.remove("вкусное", 2,4)) -- 'вное'

utf8.title

utf8.title(string): Returns the uppercase version of the string for use in case-insensitive comparisons. If string is a number, it's treated as a code point and the converted code point is returned (as a number).

Parameters

string:

The string to uppercase.

Example

print(utf8.title("привет")) -- 'ПРИВЕТ'
print(utf8.title("Привет")) -- 'ПРИВЕТ'

utf8.width

utf8.width(string[, ambi_is_double[, default_width]]): Calculate the widths of the given string. If the string is a code point, return the width of this code point.

Parameters

string:

The input string to work on.

ambi_is_double:

(optional) if provided, the ambiguous width character's width is 2, otherwise it's 1.

default_width:

(optional) if provided, this will be the width of unprintable character, used display a non-character mark for these characters.

utf8.widthindex

utf8.widthindex(string, location[, ambi_is_double[, default_width]]): Returns the character index at the location in the given string as well as the offset and the width. This is a reverse operation of utf8.width().

Parameters

string:

The input string to work on.

location:

location to get the width of.

ambi_is_double:

(optional) if provided, the ambiguous width character's width is 2, otherwise it's 1.

default_width:

(optional) if provided, this will be the width of unprintable character, used display a non-character mark for these characters.

Manual:Text Functions

Table Functions

These functions are used to manipulate tables. Through them you can add to tables, remove values, check if a value is present in the table, check the size of a table, and more.

spairs

spairs(tbl, sortFunction): Returns an iterator similar to pairs(tbl) but sorts the keys before iterating through them.

Parameters

tbl:

The table to iterate over

sortFunction:

The function to use for determining what order to iterate the items in the table. Defaults to alphanumeric sorting by key. Similar to table.sort. See example for more info.

Available in Mudlet4.10+

Example

local tbl = { Tom = 40, Mary = 50, Joe = 23 }

-- This iterates, sorting based on the key (which is the name in this case)
for name, thingies in spairs(tbl) do
  echo(string.format("%s has %d thingies\n", name, thingies))
end
--[[
Joe has 23 thingies
Mary has 50 thingies
Tom has 40 thingies
--]]

-- The function used below sorts based on the value. 
for name, thingies in spairs(tbl, function(t,a,b) return t[a] < t[b] end) do --iterate from lowest value to highest
  echo(string.format("%s has %d thingies\n", name, thingies))
end
--[[
Joe has 23 thingies
Tom has 40 thingies
Mary has 50 thingies
--]]

-- This function can be used to sort a group of Geyser gauges based on their value (what percentage of the gauge is filled)
local gaugeSort = function(t,a,b)
    local avalue = t[a].value or 100 -- treat non-gauges as though they are full gauges. If you know for -sure- the table only has gauges the 'or 100' is not needed.
    local bvalue = t[b].value or 100
    return avalue < bvalue
end
for _,gauge in spairs(tblOfGauges, gaugeSort) do
  -- do what you want with the gauges. First one will be the least full, then the next least full, until the last which will be the most full. 
  -- If you replace the < with a > it will go from most full to least full instead.
end

table.collect

table.collect(tbl, func): Returns a table that is every key-value pair from tbl for which func(key,value) returns true

Parameters

tbl:

The table to collect items from

func:

the function to use for testing if an item should be collected or not

Available in Mudlet4.8+

Example

local vitals = { hp = 3482, maxhp = 5000, mana = 3785, maxmana = 5000 }
local pullHpKeys = function(key, value)
  if string.match(key, "hp") then return true end
end
local hp_values = table.collect(vitals, pullHpKeys)
display(hp_values)

This prints the following:

{
  hp = 3482,
  maxhp = 5000
}

Returns: A table containing all the key/value pairs from tbl that cause func(key,value) to return true

table.complement

table.complement (set1, set2): Returns a table that is the relative complement of the first table with respect to the second table. Returns a complement of key/value pairs.

Parameters

table1:
table2:

Example

local t1 = {key = 1,1,2,3}
local t2 = {key = 2,1,1,1}
local comp = table.complement(t1,t2)
display(comp)

This prints the following:

  key = 1,
  [2] = 2,
  [3] = 3

Returns: A table containing all the key/value pairs from table1 that do not match the key/value pairs from table2.

table.concat

table.concat(table, delimiter, startingindex, endingindex): Joins a table into a string. Each item must be something which can be transformed into a string.; Returns the joined string.; See also: string.split

Parameters

table:

The table to concatenate into a string. Passed as a table.

delimiter:

Optional string to use to separate each element in the joined string. Passed as a string.

startingindex:

Optional parameter to specify which index to begin the joining at. Passed as an integer.

endingindex:

Optional parameter to specify the last index to join. Passed as an integer.

Examples

--This shows a basic concat with none of the optional arguments
testTable = {1,2,"hi","blah",}
testString = table.concat(testTable)
--testString would be equal to "12hiblah"

--This example shows the concat using the optional delimiter
testString = table.concat(testTable, ", ")
--testString would be equal to "1, 2, hi, blah"

--This example shows the concat using the delimiter and the optional starting index
testString = table.concat(testTable, ", ", 2)
--testString would be equal to "2, hi, blah"

--And finally, one which uses all of the arguments
testString = table.concat(testTable, ", ", 2, 3)
--testString would be equal to "2, hi"

table.contains

table.contains (t, value): Determines if a table contains a value as a key or as a value (recursive as of Mudlet 4.8+).; Returns true or false

See also: table.index_of

Note: This tests for the 'value' parameter as either a key or value in the table. That means this will return true: table.contains({"Bob"}, 1)

Parameters

t:

The table in which you are checking for the presence of the item as key or value..

value:

The value you are checking for within the table.

Example

local test_table = {"value1", "value2", "value3", "value4", "value5", "value6", "value7"}
if table.contains(test_table, "value1") then 
   print("Got value 1!")
else
   print("Don't have it. Sorry!")
end

-- if the table has just a few values, you can skip making a local, named table:
if table.contains({"Anna", "Alanna", "Hanna"}, "Anna") then 
   print("Have 'Anna' in the list!")
else
   print("Don't have the name. Sorry!")
end

-- don't forget, it will return true if the item is a key in the table as well
display(table.contains({"bob"}, 1) -- displays true, as 1 is the key/index for "bob"
-- If you really only want to check values, try table.index_of, which returns the key a value is found at, or nil if it is not found.

table.deepcopy

table.deepcopy (table): Returns a complete copy of the table.

Parameters

table:

The table which you'd like to get a copy of.

Example

local test_table = { "value1", "value2", "value3", "value4" }

-- by just doing:
local newtable = test_table
-- you're linking newtable to test_table. Any change in test_table will be reflected in newtable.

-- however, by doing:
local newtable = table.deepcopy(test_table)
-- the two tables are completely separate now.

table.intersection

table.intersection (set1, set2): Returns a table that is the relative intersection of the first table with respect to the second table. Returns a intersection of key/value pairs.

Parameters

table1:
table2:

Example

local t1 = {key = 1,1,2,3}
local t2 = {key = 1,1,1,1}
local intersect = table.intersection(t1,t2)
display(intersect)

This prints the following:

  key = 1,
  1

Returns: A table containing all the key/value pairs from table1 that match the key/value pairs from table2.

table.insert

table.insert(table, [pos,] value): Inserts element value at position pos in table, shifting up other elements to open space, if necessary. The default value for pos is n+1, where n is the length of the table, so that a call table.insert(t,x) inserts x at the end of table t.; See also: table.remove

Parameters

table:

The table in which you are inserting the value

pos:

Optional argument, determining where the value will be inserted.

value:

The variable that you are inserting into the table. Can be a regular variable, or even a table or function*.

Examples

--it will insert whats inside the variable of matches[2] into at the end of table of 'test_db_name'. 
table.insert(test_db_name, matches[2])
--it will insert other thing at the first position of this table.
table.insert(test_db_name, 1, "jgcampbell300")

--[=[

This results:

test_db_name = {
    "jgcampbell300",
    "SlySven"
}
]=]

table.index_of

table.index_of(table, value)

Returns the index (location) of an item in an indexed table, or nil if it's not found. Think of it as a table.find function (although it is called table.index_of).

Parameters

table:

The table in which you are searching the value

value:

The variable that you are searching for in the table.

Examples

-- will return 1, because 'hi' is the first item in the list
table.index_of({"hi", "bye", "greetings"}, "hi")

-- will return 3, because 'greetings' is third in the list
table.index_of({"hi", "bye", "greetings"}, "greetings")

-- you can also use this in combination with table.remove(), which requires the location of the item to delete
local words = {"hi", "bye", "greetings"}
table.remove(words, table.index_of(words, "greetings"))

-- however that won't work if the word isn't present, table.remove(mytable, nil (from table.index_of)) will give an error
-- so if you're unsure, confirm with table.contains first
local words = {"hi", "bye", "greetings"}
if table.contains(words, "greetings") then
  table.remove(words, table.index_of(words, "greetings"))
end

table.is_empty

table.is_empty(table): Check if a table is devoid of any values.

Parameters

table:

The table you are checking for values.

table.keys

table.keys(table): return a table that is the collection of the keys in use by the table passed in

Parameters

table:

The table you are collecting keys from.

Available in Mudlet4.1+

Example

   local testTable = {
     name = "thing",
     type = "test",
     malfunction = "major"
   }
   local keys = table.keys(testTable)
   -- key is now a table { "name", "type", "malfunction" } but the order cannot be guaranteed
   -- as pairs() does not iterate in a guaranteed order. If you want the keys in alphabetical
   -- run table.sort(keys) and keys == { "malfunction", "name", "type" }

table.load

table.load(location, table): Load a table from an external file into mudlet.; See also: table.save

Tip: you can load a table from anywhere on your computer, but it's preferable to have them consolidated somewhere connected to Mudlet, such as the current profile.

Parameters

location:

Where you are loading the table from. Can be anywhere on your computer.

table:

The table that you are loading into - it must exist already.

Example:

-- This will load the table mytable from the lua file mytable present in your Mudlet Home Directory.
mytable = mytable or {}
if io.exists(getMudletHomeDir().."/mytable.lua") then
  table.load(getMudletHomeDir().."/mytable.lua", mytable) -- using / is OK on Windows too.
end

table.matches

table.matches(tbl, pattern, [pattern2], [pattern_n], [check_keys]): Returns a table of key-value pairs from tbl which match one of the supplied patterns when checked via string.match. This function is not recursive - nested tables within tbl will not be checked, only the top-level.

Parameters

tbl:

the table you want to check over using string.match

pattern:

the pattern you want to use to check each key-value pair. You may specify multiple patterns, separated by commas

check_keys:

boolean argument, set to true if you want to include a key-value pair if the key or value string.matches. If you do not set this, only the value will be checked

Available in Mudlet4.8+

Example

local items = { this = "that", hp = 400, [4] = "toast", something = "else", more = "keypairs" }
local matches = table.matches(items, "%d")
-- here matches will be { hp = 400 }
local matches = table.matches(items, "%d", "that", true)
-- here matches will be { hp = 400, this = "that", [4] = "toast" }

table.maxn

table.maxn(table): Returns the largest positive numerical index of the given table, or zero if the table has no positive numerical indices. (To do its job this function does a linear traversal of the whole table.)

table.n_collect

table.n_collect(tbl, func(value)): returns a table which contains every unique value from tbl for which func(value) returns true. Ignores keys. Table returned is ipairs iterable.

Parameters

tbl:

the table you want to collect values from

func(value):

the function to check each value against

Available in Mudlet4.8+

Example

local items = { 
  this = "that",
  other = "thing",
  otter = "potato",
  honey = "bee"
}
local beginsWithTH = function(value)
  if string.match(value, "^th") then return true end
end
local nmatches = table.n_collect(items, beginsWithTH)
-- nmatches will be { "that", "thing" }
-- the order will not necessarily be preserved

table.n_filter

table.n_filter(table, function(element[, index[, table]])): Returns a new table with all elements that pass the test implemented by the provided function. If no elements pass the test, an empty table will be returned.

Parameters

table: the table you wish to filter values out of.
function: the function to test each element of the array. Return true to keep the element, false otherwise. It accepts three arguments:
- element: The current element being processed in the table.
- index: (optional) The index of the current element being processed in the table.
- table: (optional) The table n_filter was called upon.

Examples

Filter out small values:

local function isBigEnough(value) return value >= 10 end
local filtered = table.n_filter({12, 5, 8, 130, 44}, isBigEnough)
-- filtered: {12, 130, 44}

Filter out invalid entries:

local invalidEntries = 0
local entries = {
  { id = 15 }, { id = -1 }, { id = 0 }, { id = 3 },
  { id = 12.2 }, { }, { id = nil }, { id = false },
  { id = 'not a number' }
}

local function isNumber(t) return t and type(t) == 'number' end
local function filterByID(item)
  if isNumber(item.id) and item.id ~= 0 then
    return true
  end
  invalidEntries = invalidEntries + 1
  return false
end

local entriesByID = table.n_filter(entries, filterByID)
-- invalidEntries: 5
-- entriesByID: { { id = 15 }, { id = -1 }, { id = 3 }, { id = 12.2 } }

Filter out content based on search criteria:

local fruits = {'apple', 'banana', 'grapes', 'mango', 'orange'}
local function filterItems(t, query)
  return table.n_filter(t, function(item)
    return item:lower():find(query:lower())
  end)
end
filterItems(fruits, 'ap') -- {'apple', 'grapes'}
filterItems(fruits, 'an') -- {'banana', 'mango', 'orange'}

table.n_flatten

table.n_flatten(table): Returns a new table with the sub-table elements concatenated into it.

Parameters

table: A table of nested sub-tables you wish to flatten.

Example

local t1 = {1, 2, {3, 4}};
local t2 = {1, 2, {3, 4, {5, 6}}};
local t3 = {1, 2, {3, 4, {5, 6, {7, 8, {9, 10}}}}};
table.n_flatten(t1) -- {1, 2, 3, 4}
table.n_flatten(t2) -- {1, 2, 3, 4, 5, 6}
table.n_flatten(t3) -- {1, 2, 3, 4, 5, 6, 7, 8, 9, 10}

table.n_matches

table.n_matches(tbl, pattern, [pattern2], [patternN]): Returns a table of unique values within tbl which one of the supplied patterns matches using string.match

Parameters

tbl:

The table you want to search for values

pattern:

The pattern you want to check each value with, using string.match. You can supply multiple patterns, separated by commas

Available in Mudlet4.8+

Example

local items = { this = "that", [4] = "other", hp = 500, mana = 40 }
local matches = table.n_matches(items, "%a")
-- matches will be { "that", "other" }
-- order is not preserved/guaranteed

table.n_union

table.n_union (table1, table2): Returns a numerically indexed table that is the union of the provided tables (that is - merges two indexed lists together). This is a union of unique values. The order and keys of the input tables are not preserved.

Parameters

table1: the first table as an indexed list.
table2: the second table as an indexed list.

Example

display(table.n_union({"bob", "mary"}, {"august", "justinian"}))

{
  "bob",
  "mary",
  "august",
  "justinian"
}

table.n_complement

table.n_complement (set1, set2): Returns a table that is the relative complement of the first numerically indexed table with respect to the second numerically indexed table. Returns a numerically indexed complement of values.

Parameters

table1:
table2:

Example

local t1 = {1,2,3,4,5,6}
local t2 = {2,4,6}
local comp = table.n_complement(t1,t2)
display(comp)

This prints the following:

  1,
  3,
  5

Returns: A table containing all the values from table1 that do not match the values from table2.

table.n_intersection

table.n_intersection (...): Returns a numerically indexed table that is the intersection of the provided tables. This is an intersection of unique values. The order and keys of the input tables are not preserved

Example

local t1 = {1,2,3,4,5,6}
local t2 = {2,4,6}
local intersect = table.n_intersection(t1,t2)
display(intersect)

This prints the following:

  2,
  4,
  6

Returns: A table containing the values that are found in every one of the tables.

table.pickle

table.pickle( t, file, tables, lookup ): Internal function used by table.save() for serializing data.

table.remove

table.remove(table, value_position): Remove a value from an indexed table, by the values position in the table.; See also: table.insert

Parameters

table

The indexed table you are removing the value from.

value_position

The indexed number for the value you are removing.

Example

testTable = { "hi", "bye", "cry", "why" }
table.remove(testTable, 1) -- will remove hi from the table
-- new testTable after the remove
testTable = { "bye", "cry", "why" }
-- original position of hi was 1, after the remove, position 1 has become bye
-- any values under the removed value are moved up, 5 becomes 4, 4 becomes 3, etc

Note: To remove a value from a key-value table, it's best to simply change the value to nil.

testTable = { test = "testing", go = "boom", frown = "glow" }
table.remove(testTable, "test") -- this will error
testTable.test = nil -- won't error
testTable["test"] = nil -- won't error

table.save

table.save(location, table): Save a table into an external file in location.; See also: table.load

Parameters

location:

Where you want the table file to be saved. Can be anywhere on your computer.

table:

The table that you are saving to the file.

Example:

-- Saves the table mytable to the lua file mytable in your Mudlet Home Directory
table.save(getMudletHomeDir().."/mytable.lua", mytable)

table.sort

table.sort(Table [, comp]): Sorts table elements in a given order, in-place, from Table[1] to Table[n], where n is the length of the table.

If comp is given, then it must be a function that receives two table elements, and returns true when the first is less than the second (so that not comp(a[i+1],a[i]) will be true after the sort). If comp is not given, then the standard Lua operator < is used instead.

The sort algorithm is not stable; that is, elements considered equal by the given order may have their relative positions changed by the sort.

See https://www.lua.org/pil/19.3.html for more info

table.size

table.size (t): Returns the size of a key-value table (this function has to iterate through all of the table to count all elements).; Returns a number.

Parameters

t:

The table you are checking the size of.

Note: For index based tables you can get the size with the # operator: This is the standard Lua way of getting the size of index tables i.e. ipairs() type of tables with numerical indices. To get the size of tables that use user defined keys instead of automatic indices (pairs() type) you need to use the function table.size() referenced above.

local test_table = { "value1", "value2", "value3", "value4" }
myTableSize = #test_table
-- This would return 4.
local myTable = { 1 = "hello", "key2" = "bye", "key3" = "time to go" }
table.size(myTable)
-- This would return 3.

table.unpickle

table.unpickle( t, tables, tcopy, pickled ): Internal function used by table.load() for deserialization.

table.update

table.update(table1, table2): Returns a table in which key/value pairs from table2 are added to table1, and any keys present in both tables are assigned the value from table2, so that the resulting table is table1 updated with information from table2.

Example

display(table.update({a = 1, b = 2, c = 3}, {b = 4, d = 5}))
{
   a = 1,
   b = 4,
   c = 3,
   d = 5
}

-- to just set a table to new values, assign it directly:
mytable = {key1 = "newvalue"}

table.union

table.union(...): Returns a table that is the union of the provided tables. This is a union of key/value pairs. If two or more tables contain different values associated with the same key, that key in the returned table will contain a subtable containing all relevant values. See table.n_union() for a union of values. Note that the resulting table may not be reliably traversable with ipairs() due to the fact that it preserves keys. If there is a gap in numerical indices, ipairs() will cease traversal.

Examples

tableA = {
   [1] = 123,
   [2] = 456,
   ["test"] = "test",
}
---
tableB = {
   [1] = 23,
   [3] = 7,
   ["test2"] = function() return true end,
}
---
tableC = {
   [5] = "c",
}
---
table.union(tableA, tableB, tableC)
-- will return the following:
{
   [1] = {
      123,
      23,
   },
   [2] = 456,
   [3] = 7,
   [5] = "c",
   ["test"] = "test",
   ["test2"] = function() return true end,
}

Text to Speech Functions

These functions can make Mudlet talk for you (audible sound from written words). Check out the Text-To-Speech Manual for more detail on how this all works together.

Available in Mudlet3.17+

Several Mudlet events are available functionality as well:

ttsSpeechStarted
ttsSpeechReady
ttsSpeechQueued
ttsSpeechPaused
ttsSpeechError
ttsPitchChanged
ttsRateChanged
ttsVoiceChanged
ttsVolumeChanged

ttsClearQueue

ttsClearQueue([index]): This function will help, if you have already queued a few lines of text to speak, and now want to remove some or all of them.; Returns false if an invalid index is given.

ttsGetCurrentLine

ttsGetCurrentLine(): If you want to analyse if or what is currently said, this function is for you.; Returns the text being spoken, or false if not speaking.

ttsGetCurrentVoice

ttsGetCurrentVoice(): If you have multiple voices available on your system, you may want to check which one is currently in use.; Returns the name of the voice used for speaking.

ttsGetPitch

ttsGetPitch(): If you want to analyse the pitch or tone of your current speech.; Returns the current pitch as a number between 1 (high) and -1 (deep).

ttsGetQueue

ttsGetQueue([index]): This function can be used to show your current queue of texts, or any single text thereof.; Returns a single text or a table of texts, or false. See index parameter for details.

ttsGetRate

ttsGetRate(): If you want to analyse the rate or speed of your current speech.; Returns the current rate as a number between 1 (fast) and -1 (slow).

ttsGetState

ttsGetState(): With this function you can find the current state of the speech engine.; Returns one of: ttsSpeechReady, ttsSpeechPaused, ttsSpeechStarted, ttsSpeechError, ttsUnknownState.

See also: ttsSpeak, ttsPause, ttsResume, ttsQueue

Available in Mudlet3.17+

Example

ttsQueue("We begin with some text")
ttsQueue("And we continue it without interruption")
echo(ttsGetState())
-- ttsSpeechStarted

ttsGetVoices

ttsGetVoices(): Lists all voices available to your current operating system and language settings. Currently uses the default system locale.; Returns a table of names.

Available in Mudlet3.17+

Example

display(ttsGetVoices())
-- for example returns the following on Windows (US locale)
-- {
--   "Microsoft Zira Desktop"
-- }

ttsGetVolume

ttsGetVolume(): If you want to analyse the volume of your current speech.; Returns the current volume as a number between 1 (loud) and 0 (quiet).

ttsPause

ttsPause(): Pauses the speech which is currently spoken, if any. Engines on different OS's (Windows/macOS/Linux) behave differently - pause may not work at all, it may take several seconds before it takes effect, or it may pause instantly. Some engines will look for a break that they can later resume from, such as a sentence end.

ttsQueue

ttsQueue(text to queue, [index]): This function will add the given text to your speech queue. Text from the queue will be spoken one after the other. This is opposed to ttsSpeak which will interrupt any spoken text immediately. The queue can be reviewed and modified, while their content has not been spoken.

Parameters

text to queue:

Any written text which you would like to hear spoken to you. You can write literal text, or put in string variables, maybe taken from triggers or aliases, etc.

index

(optional) number. The text will be inserted to the queue at this index position. If no index is provided, the text will be added to the end of the queue.

Available in Mudlet3.17+

Example

ttsQueue("We begin with some text")
ttsQueue("And we continue it without interruption")
display(ttsGetQueue())
-- will show the queued texts as follows
-- (first line ignored because it's being spoken and is not in queue):
-- {
--   "And we continue it without interruption"
-- }

ttsResume

ttsResume(): Resumes the speech which was previously spoken, if any has been paused.

ttsSpeak

ttsSpeak(text to speak): This will speak the given text immediately with the currently selected voice. Any currently spoken text will be interrupted (use the speech queue to queue a voice instead).

ttsSetPitch

ttsSetPitch(pitch): Sets the pitch or tone of speech playback.

Parameters

pitch:

Number. Should be between 1 and -1, will be limited otherwise.

Available in Mudlet3.17+

Example

-- talk deeply first, after 2 seconds talk highly, after 4 seconds normally again
ttsSetPitch(-1)
ttsQueue("Deep voice")

tempTimer(2, function()
  ttsSetPitch(1)
  ttsQueue("High voice")
end)

tempTimer(4, function()
  ttsSetPitch(0)
  ttsQueue("Normal voice")
end)

ttsSetRate

ttsSetRate(rate): Sets the rate or speed of speech playback. On macOS and Windows, adjusting the system rate adjusts this value automatically.

Parameters

rate:

Number. Should be between 1 and -1, will be limited otherwise.

Available in Mudlet3.17+

Example

-- talk slowly first, after 2 seconds talk quickly, after 4 seconds normally again
ttsSetRate(-1)
ttsQueue("Slow voice")

tempTimer(2, function ()
  ttsSetRate(1)
  ttsQueue("Quick voice")
end)

tempTimer(4, function ()
  ttsSetRate(0)
 ttsQueue("Normal voice")
end)

ttsSetVolume

ttsSetVolume(volume): Sets the volume of speech playback. On macOS, adjusting the system rate adjusts this value automatically.

Parameters

volume:

Number. Should be between 1 and 0, will be limited otherwise.

Available in Mudlet3.17+

Example

-- talk quietly first, after 2 seconds talk a bit louder, after 4 seconds normally again
ttsSetVolume(0.2)
ttsSpeak("Quiet voice")

tempTimer(2, function ()
  ttsSetVolume(0.5)
  ttsSpeak("Low voice")
end)

tempTimer(4, function () 
  ttsSetVolume(1)
  ttsSpeak("Normal voice")
end)

ttsSetVoiceByIndex

ttsSetVoiceByIndex(index): If you have multiple voices available, you can switch them with this function by giving their index position as seen in the table you receive from ttsGetVoices(). If you know their name, you can also use ttsSetVoiceByName. On macOS and Windows, adjusting the system voice adjusts this value automatically.; Returns true, if the setting was successful, errors otherwise.

ttsSetVoiceByName

ttsSetVoiceByName(name): If you have multiple voices available, and know their name already, you can switch them with this function. On macOS and Windows, adjusting the system voice adjusts this value automatically.; Returns true, if the setting was successful, false otherwise.

ttsSkip

ttsSkip(): Skips the current line of text.

UI Functions

All functions that help you construct custom GUIs. They deal mainly with miniconsole/label/gauge creation and manipulation as well as displaying or formatting information on the screen.

addCommandLineMenuEvent

addCommandLineMenuEvent([window,] label, eventName)

Adds item to right click menu associated with command line.

Available in Mudlet4.14+

See also: removeCommandLineMenuEvent()

Parameters

window:

Window that command line belongs to. Optional, will default to "main" (main window console)

label:

Label of item

eventName:

Event name that will be fired when clicked.

Returns

Returns true if the mouse event was added successfully.

Example

addCommandLineMenuEvent("My very own special paste from clipboard", "pasteFromClipboardWithoutLineBreaks" )
registerAnonymousEventHandler("pasteFromClipboardWithoutLineBreaks", function()
  local text = string.gsub(getClipboardText(), "[\r|\n]", "")
  appendCmdLine(text)
end)

addMouseEvent

addMouseEvent(uniqueName, eventName, [displayName, tooltipText])

Registers a new context menu option when right-clicked on a console window. Will return true if the event was added successfully, otherwise nil+message will be returned. If the displayName isn't set, uniqueName will be used for the menu label. eventName should be a Mudlet event that will handle the click data that includes event, unique name, window name, selection upper left column and row and selection bottom right column and row in that order. This is intended to be used with available cursor functions for any selection or processing needs.

Available in Mudlet4.13+

See also: getMouseEvents(), moveCursor()

Parameters

uniqueName:

A unique identifier for the mouse event.

eventName:

Name of the Mudlet event that will handle the data.

displayName:

(optional) Label text for the mouse context menu. If not set, the label defaults to uniqueName.

tooltipText:

(optional) Tooltip text when mouse is hovered on the option. If not set, no tooltip will be visible.

Returns

Returns true if the mouse event was added successfully.

Example

-- An example showing implementing a hecho-friendly copy option:

addMouseEvent("hecho copy", "onMouseCopyExample")

function rgbToHex(r,g,b)
    local rgb = (r * 0x10000) + (g * 0x100) + b
    return string.format("#%x", rgb)
end

function onMouseCopyExample(event, menu, window, startCol, startRow, endCol, endRow)
  -- Check whether there's an actual selection
  if startCol == endCol and startRow == endRow then return end
  local parsed = ""
  local lastColor = nil
  -- Loop through each symbol within the range
  for l = startRow, endRow do
    local cStart = l == startRow and startCol or 0
    moveCursor(window, cStart, l)
    local cEnd = l == endRow and endCol or #getCurrentLine() - 1
    for c = cStart, cEnd do
      selectSection(window, c, 1)
      local symbol = getSelection(window) or ""
      -- Convert the foreground color to a hex format, suitable for hecho
      local color = rgbToHex(getFgColor(window))
      -- Don't repeat the color if previous one was the same
      if color == lastColor then
        parsed = parsed .. symbol
      else
        lastColor = color
        parsed = parsed .. color .. symbol
      end
    end
    if l ~= endRow then parsed = parsed .. "\n" end
  end
  setClipboardText(parsed)
end

registerAnonymousEventHandler("onMouseCopyExample", "onMouseCopyExample")

ansi2decho

ansi2decho(text, default_colour): Converts ANSI colour sequences in text to colour tags that can be processed by the decho() function.; See also: decho()

Available in Mudlet3.0+

Note: ANSI bold is available since Mudlet 3.7.1+.

Note: underline, italics, overline, and strikethrough supported since Mudlet 4.15+

Parameters

text:

String that contains ANSI colour sequences that should be replaced.

default_colour:

Optional - ANSI default colour code (used when handling orphan bold tags).

Return values

string text:

The decho-valid converted text.

string colour:

The ANSI code for the last used colour in the substitution (useful if you want to colour subsequent lines according to this colour).

Example

local replaced = ansi2decho('\27[0;1;36;40mYou say in a baritone voice, "Test."\27[0;37;40m')
-- 'replaced' should now contain <r><0,255,255:0,0,0>You say in a baritone voice, "Test."<r><192,192,192:0,0,0>
decho(replaced)

Or show a complete colourful squirrel! It's a lotta code to do all the colours, so click the Expand button on the right to show it:

decho(ansi2decho([[
                                                  �[38;5;95m▄�[48;5;95;38;5;130m▄▄▄�[38;5;95m█�[49m▀�[0m    �[0m
╭───────────────────────╮          �[38;5;95m▄▄�[0m          �[38;5;95m▄�[48;5;95;38;5;130m▄▄�[48;5;130m█�[38;5;137m▄�[48;5;137;38;5;95m▄�[49m▀�[0m      �[0m
│                       │         �[48;5;95;38;5;95m█�[48;5;137;38;5;137m██�[48;5;95m▄�[49;38;5;95m▄▄▄�[48;5;95;38;5;137m▄▄▄�[49;38;5;95m▄▄�[48;5;95;38;5;130m▄�[48;5;130m███�[38;5;137m▄�[48;5;137m█�[48;5;95;38;5;95m█�[0m       �[0m
│  Encrypt everything!  │       �[38;5;95m▄�[48;5;187;38;5;16m▄�[48;5;16;38;5;187m▄�[38;5;16m█�[48;5;137;38;5;137m███�[38;5;187m▄�[38;5;16m▄▄�[38;5;137m██�[48;5;95;38;5;95m█�[48;5;130;38;5;130m█████�[48;5;137;38;5;137m██�[48;5;95;38;5;95m█�[0m       �[0m
│                       ├────  �[38;5;95m▄�[48;5;95;38;5;137m▄�[48;5;16m▄▄▄�[48;5;137m███�[48;5;16;38;5;16m█�[48;5;187m▄�[48;5;16m█�[48;5;137;38;5;137m█�[48;5;95;38;5;95m█�[48;5;130;38;5;130m██████�[48;5;137;38;5;137m███�[48;5;95;38;5;95m█�[0m      �[0m
╰───────────────────────╯      �[48;5;95;38;5;95m█�[48;5;137;38;5;137m██�[48;5;16m▄�[38;5;16m█�[38;5;137m▄�[48;5;137m██████�[48;5;95;38;5;95m█�[48;5;130;38;5;130m██████�[48;5;137;38;5;137m████�[48;5;95m▄�[49;38;5;95m▄�[0m    �[0m
                                �[38;5;95m▀�[48;5;137m▄�[38;5;137m███████�[38;5;95m▄�[49m▀�[0m �[48;5;95;38;5;95m█�[48;5;130;38;5;130m██████�[48;5;137;38;5;137m████�[48;5;95m▄�[49;38;5;95m▄�[0m   �[0m
                                  �[48;5;95;38;5;187m▄▄▄�[38;5;137m▄�[48;5;137m██�[48;5;95;38;5;95m█�[0m    �[48;5;95;38;5;95m█�[48;5;130;38;5;130m███████�[48;5;137;38;5;137m███�[48;5;95m▄�[49;38;5;95m▄�[0m  �[0m
                                 �[38;5;187m▄�[48;5;187m███�[48;5;137;38;5;137m████�[48;5;95;38;5;95m█�[0m   �[48;5;95;38;5;95m█�[48;5;130;38;5;130m█████████�[48;5;137;38;5;137m███�[48;5;95;38;5;95m█�[0m �[0m
                                �[38;5;187m▄�[48;5;187m███�[38;5;137m▄�[48;5;137m█�[48;5;95;38;5;95m█�[48;5;137;38;5;137m███�[48;5;95m▄�[49;38;5;95m▄�[0m  �[38;5;95m▀�[48;5;130m▄�[38;5;130m███████�[48;5;137;38;5;137m████�[48;5;95;38;5;95m█�[0m�[0m
                               �[48;5;95;38;5;95m█�[48;5;187;38;5;187m████�[48;5;137;38;5;137m██�[48;5;95m▄�[48;5;137;38;5;95m▄�[38;5;137m██�[38;5;95m▄�[38;5;137m█�[48;5;95m▄�[49;38;5;95m▄�[0m �[48;5;95;38;5;95m█�[48;5;130;38;5;130m███████�[48;5;137;38;5;137m████�[48;5;95;38;5;95m█�[0m�[0m
                              �[38;5;95m▄�[48;5;95;38;5;137m▄�[48;5;187;38;5;187m████�[48;5;137;38;5;137m███�[48;5;95;38;5;95m█�[48;5;137;38;5;137m██�[48;5;95;38;5;95m█�[48;5;137;38;5;137m██�[48;5;95m▄�[49;38;5;95m▄�[0m �[48;5;95;38;5;95m█�[48;5;130;38;5;130m██████�[48;5;137;38;5;137m████�[48;5;95;38;5;95m█�[0m�[0m
                           �[38;5;95m▄�[48;5;95m██�[48;5;137m▄▄�[48;5;187;38;5;187m████�[48;5;137;38;5;95m▄▄�[48;5;95;38;5;137m▄�[48;5;137m█�[38;5;95m▄�[48;5;95;38;5;137m▄�[48;5;137m████�[48;5;95;38;5;95m█�[0m �[48;5;95;38;5;95m█�[48;5;130;38;5;130m██████�[48;5;137;38;5;137m████�[48;5;95;38;5;95m█�[0m�[0m
                                �[48;5;187;38;5;187m███�[48;5;95m▄�[38;5;137m▄▄▄▄�[48;5;137m██████�[48;5;95;38;5;95m█�[49m▄�[48;5;95;38;5;130m▄�[48;5;130m██████�[48;5;137;38;5;137m███�[38;5;95m▄�[49m▀�[0m�[0m
                                �[48;5;187;38;5;95m▄�[38;5;187m████�[48;5;137;38;5;137m█�[38;5;95m▄�[48;5;95;38;5;137m▄�[48;5;137m█████�[48;5;95;38;5;95m█�[48;5;130;38;5;130m███████�[38;5;137m▄�[48;5;137m████�[48;5;95;38;5;95m█�[0m �[0m
                                �[48;5;95;38;5;95m█�[48;5;187;38;5;137m▄�[38;5;187m███�[48;5;95;38;5;95m█�[48;5;137;38;5;137m██████�[48;5;95m▄▄�[48;5;130m▄▄▄▄▄�[48;5;137m██████�[48;5;95;38;5;95m█�[0m  �[0m
                              �[38;5;95m▄▄▄�[48;5;95;38;5;137m▄�[48;5;187m▄�[38;5;187m██�[48;5;95m▄�[48;5;137;38;5;95m▄�[38;5;137m█████�[38;5;95m▄�[38;5;137m███████████�[48;5;95;38;5;95m█�[0m   �[0m
                            �[38;5;95m▀▀▀▀▀▀▀▀�[48;5;187m▄▄▄�[48;5;95;38;5;137m▄�[48;5;137m██�[38;5;95m▄�[49m▀�[0m �[38;5;95m▀▀�[48;5;137m▄▄▄▄▄▄�[49m▀▀▀�[0m    �[0m
                                  �[38;5;95m▀▀▀▀▀▀▀▀▀�[0m                 �[0m
                                                                    ]]))

ansi2string

ansi2string(text): Strips ANSI colour sequences from a string (text); See also: ansi2decho()

Available in Mudlet4.10+

Parameters

text:

String that contains ANSI colour sequences that should be removed.

Return values

string text:

The plain text without ANSI colour sequences.

Example

local replaced = ansi2string('\27[0;1;36;40mYou say in a baritone voice, "Test."\27[0;37;40m')
-- 'replaced' should now contain You say in a baritone voice, "Test."
print(replaced)

appendBuffer

appendBuffer(name): Pastes the previously copied rich text (including text formats like color etc.) into user window name.; See also: selectCurrentLine(), copy(), paste()

Parameters

name:

The name of the user window to paste into. Passed as a string.

Example

--selects and copies an entire line to user window named "Chat"
selectCurrentLine()
copy()
appendBuffer("Chat")

bg

bg([window, ]colorName): Changes the background color of the text. Useful for highlighting text.; See Also: fg(), setBgColor()

Parameters

window:

The miniconsole to operate on - optional. If you'd like it to work on the main window, don't specify anything, or use main (since Mudlet 3.0).

colorName:

The name of the color to set the background to.

Example

--This would change the background color of the text on the current line to magenta
selectCurrentLine()
bg("magenta")

-- or echo text with a green background to a miniconsole
bg("my window", "green")
echo("my window", "some green text\n")

calcFontSize

calcFontSize(window_or_fontsize, [fontname]): Returns the average height and width of characters in a particular window, or a font name and size combination. Helpful if you want to size a miniconsole to specific dimensions.; Returns two numbers, width/height; See also: setMiniConsoleFontSize(), getMainWindowSize()

Parameters

window_or_fontsize:

The miniconsole or font size you are wanting to calculate pixel sizes for.

fontname:

Specific font name (along with the size as the first argument) to calculate for.

Note: Window as an argument is available in Mudlet 3.10+, and font name in Mudlet 4.1+.

Example

--this snippet will calculate how wide and tall a miniconsole designed to hold 4 lines of text 20 characters wide
--would need to be at 9 point font, and then changes miniconsole Chat to be that size
local width,height = calcFontSize(9)
width = width * 20
height = height * 4
resizeWindow("Chat", width, height)

cecho

cecho([window], text): Echoes text that can be easily formatted with colour and the below tags. You can also include unicode art in it - try some examples from 1lineart.

Formatting

<b>  - bold
</b> - bold off
<i>  - italics
</i> - italics off
<u>  - underline
</u> - underline off
<o>  - overline
</o> - overline off
<s>  - strikethrough
</s> - strikethrough off

See also: decho(), hecho(), creplaceLine()

Note: Support for labels added in Mudlet 4.15; however, it does not turn a label into a miniconsole and every time you cecho it will erase any previous echo sent to the label.

Parameters

window:

Optional - the window name to echo to - can either be none or "main" for the main window, or a miniconsole, userwindow, or label name.

text:

The text to display, with color names inside angle brackets <>, ie <red>. If you'd like to use a background color, put it after a colon : - <:red>. You can use the <reset> tag to reset to the default color. You can select any from this list:

Example

cecho("Hi! This text is <red>red, <blue>blue, <green> and green.")

cecho("<:green>Green background on normal foreground. Here we add an <ivory>ivory foreground.")

cecho("<blue:yellow>Blue on yellow text!")

cecho("\n<red>Red text with <i>italics</i>, <u>underline</u>, <s>strikethrough</s>, <o>overline</o>, and <b>bold</b>.")

cecho("\n<green><o><u>Green text with over and underline at the same time.</o></u>")

-- \n adds a new line
cecho("<red>one line\n<green>another line\n<blue>last line")

cecho("myinfo", "<green>All of this text is green in the myinfo miniconsole.")

cecho("<green>(╯°□°）<dark_green>╯︵ ┻━┻")

cecho("°º¤ø,¸¸,ø¤º°`°º¤ø,¸,ø¤°º¤ø,¸¸,ø¤º°`°º¤ø,¸")

cecho([[
 ██╗    ██╗     ██╗███╗   ██╗███████╗     █████╗ ██████╗ ████████╗
███║    ██║     ██║████╗  ██║██╔════╝    ██╔══██╗██╔══██╗╚══██╔══╝
╚██║    ██║     ██║██╔██╗ ██║█████╗      ███████║██████╔╝   ██║
 ██║    ██║     ██║██║╚██╗██║██╔══╝      ██╔══██║██╔══██╗   ██║
 ██║    ███████╗██║██║ ╚████║███████╗    ██║  ██║██║  ██║   ██║
 ╚═╝    ╚══════╝╚═╝╚═╝  ╚═══╝╚══════╝    ╚═╝  ╚═╝╚═╝  ╚═╝   ╚═╝
]])

cechoLink

cechoLink([windowName], text, command, hint, true): Echos a piece of text as a clickable link, at the end of the current selected line - similar to cecho(). This version allows you to use colours within your link text.

See also: echoLink(), dechoLink(), hechoLink()

Parameters

windowName:

optional parameter, allows selection between sending the link to a miniconsole or the main window.

text:

text to display in the echo. Same as a normal cecho().

command:

Lua code to do when the link is clicked, as text or a function (since Mudlet 4.11).

hint:

text for the tooltip to be displayed when the mouse is over the link.

true:

requires argument for the colouring to work.

Example

-- echo a link named 'press me!' that'll send the 'hi' command to the game
cechoLink("<red>press <brown:white>me!", function() send("hi") end, "This is a tooltip", true)

-- alternatively, put command as text (in [[ and ]] to use quotation marks inside)
cechoLink("<red>press <brown:white>me!", [[send("hi")]], "This is a tooltip", true)

cecho2ansi

ansiFormattedString = cecho2ansi(text)

Converts cecho formatted text to ansi formatted text. Used by cfeedTriggers, but useful if you want ansi formatted text for any other reason.

See also: cecho(), cfeedTriggers()

Available in Mudlet4.15+

Note: This function uses the ansi short colors (0-15) for color names which have base 16 ansi equivalents, such as 'red', 'blue', "lightBlue", "cyan", etc rather than the values defined in the color_table. If there is no base ansi equivalent then it will use the rgb values from the color_table for the color.

Parameters

text:

The cecho formatted text for conversion

Returns

String converted to ansi formatting

Example

-- replicates the functionality of cfeedTriggers() for a single line.
-- you would most likely just use cfeedTriggers, but it makes for a tidy example.
feedTriggers(cecho2ansi("\n<red>This is red.<reset> <i>italic</i>, <b>bold</b>, <s>strikethrough</s>, <u>underline</u>\n"))

cechoPopup

cechoPopup([windowName], text, {commands}, {hints}, [useCurrentFormatElseDefault]): Creates text with a left-clickable link, and a right-click menu for more options at the end of the current line, like cecho(). The added text, upon being left-clicked, will do the first command in the list. Upon being right-clicked, it'll display a menu with all possible commands. The menu will be populated with hints, one for each line.

Available in Mudlet4.1+

Parameters

windowName:

(optional) name of the window to echo to. Use either main or omit for the main window, or the miniconsoles name otherwise.

text:

the text to display

{commands}:

a table of lua code to do, in text strings or as functions (since Mudlet 4.11), i.e. {[[send("hello")]], function() echo("hi!") end}

{hints}:

a table of strings which will be shown on the popup and right-click menu. ie, {"send the hi command", "echo hi to yourself"}

useCurrentFormatElseDefault:

(optional) a boolean value for using either the current formatting options (colour, underline, italic) or the link default (blue underline).

Example

-- Create some text as a clickable with a popup menu:
cechoPopup("<red>activities<reset> to do", {function() send "sleep" end, function() send "sit" end, function() send "stand" end}, {"sleep", "sit", "stand"}, true)

-- alternatively, put command as text (in [[ and ]] to use quotation marks inside)
cechoPopup("<red>activities<reset> to do", {[[send "sleep"]], [[send "sit"]], [[send "stand"]]}, {"sleep", "sit", "stand"}, true)

cinsertLink

cinsertLink([windowName], text, command, hint, true): Echos a piece of text as a clickable link, at the end of the current cursor position - similar to cinsertText(). This version allows you to use colours within your link text.

cinsertPopup

cinsertPopup([windowName], text, {commands}, {hints}, [useCurrentFormatElseDefault]): Creates text with a left-clickable link, and a right-click menu for more options at the end of the current cursor position, like cinsertText(). The added text, upon being left-clicked, will do the first command in the list. Upon being right-clicked, it'll display a menu with all possible commands. The menu will be populated with hints, one for each line.

Available in Mudlet4.1+

Parameters

windowName:

(optional) name of the window to echo to. Use either main or omit for the main window, or the miniconsoles name otherwise.

text:

the text to display

{commands}:

a table of lua code to do, in text strings or as functions (since Mudlet 4.11), i.e. {[[send("hello")]], function() echo("hi!") end}

{hints}:

a table of strings which will be shown on the popup and right-click menu. ie, {"send the hi command", "echo hi to yourself"}

useCurrentFormatElseDefault:

(optional) a boolean value for using either the current formatting options (colour, underline, italic) or the link default (blue underline).

Example

-- Create some text as a clickable with a popup menu:
cinsertPopup("<red>activities<reset> to do", {function() send "sleep" end, function() send "sit" end, function() send "stand" end}, {"sleep", "sit", "stand"}, true)

-- Create some text as a clickable with a popup menu:
cinsertPopup("<red>activities<reset> to do", {[[send "sleep"]], [[send "sit"]], [[send "stand"]]}, {"sleep", "sit", "stand"}, true)

cinsertText

cinsertText([window], text): inserts text at the current cursor position, with the possibility for color tags.; See Also: cecho(), creplaceLine()

Parameters

window:

Optional - the window name to echo to - can either be none or "main" for the main window, or the miniconsoles name.

text:

The text to display, with color names inside angle brackets <>, ie <red>. If you'd like to use a background color, put it after a double colon : - <:red>. You can use the <reset> tag to reset to the default color. You can select any from this list:

Example

cinsertText("Hi! This text is <red>red, <blue>blue, <green> and green.")

cinsertText("<:green>Green background on normal foreground. Here we add an <ivory>ivory foreground.")

cinsertText("<blue:yellow>Blue on yellow text!")

cinsertText("myinfo", "<green>All of this text is green in the myinfo miniconsole.")

clearUserWindow

clearUserWindow([name]): This is (now) identical to clearWindow().

clearWindow

clearWindow([windowName]): Clears the label, mini console, or user window with the name given as argument (removes all text from it). If you don't give it a name, it will clear the main window.

Parameters

windowName:

(optional) The name of the label, mini console, or user window to clear. Passed as a string.

Example

--This would clear a label, user window, or miniconsole with the name "Chat"
clearWindow("Chat")

-- this can clear your whole main window
clearWindow()

closestColor

closestColor(colorOrR[,G,B])

Returns the closest color from the color_table to the one provided for use in cecho and associated functions.

Available in Mudlet4.13+

Parameters

colorOrR:

Either the string representation of a color from decho or hecho (IE "#ff0077" or "<255,0,128>"), a table of color values (IE {255,0,18}), or the Red component of RGB when followed by two next optional parameters

G:

(optional) green component of RGB coordinates. Only needed if first parameter sent as the Red component only

B:

(optional) blue component of RGB coordinates. Only needed if first parameter sent as the Red component only

Returns

The closest color name from the color_table to the one supplied on success
nil + error if it cannot parse the parameters into a color.

Example

local colorName = closestColor(255, 0, 0) -- "ansi_light_red"
local colorName = closestColor({127, 255, 127}) -- "ansi_120"
local colorName = closestColor("<127, 127, 127>") -- "ansi_008"
local colorName = closestColor("#a020e6") -- "purple"
local colorName = closestColor("blue") -- "blue" (you wouldn't necessarily do this on purpose, but during automated color conversions this might occur)

copy

copy([windowName]): Copies the current selection to the lua virtual clipboard. This function operates on rich text, i. e. the selected text including all its format codes like colors, fonts etc. in the lua virtual clipboard until it gets overwritten by another copy operation.; See also: selectString(), selectCurrentLine(), paste(), appendBuffer(), replace(), createMiniConsole(), openUserWindow()

Parameters

windowName (optional):

the window from which to copy text - use the main console if not specified.

Example

-- This script copies the current line on the main screen to a window (miniconsole or userwindow) called 'chat' and gags the output on the main screen.
selectString(line, 1)
copy()
appendBuffer("chat")
replace("This line has been moved to the chat window!")

copy2decho

copy2decho([window], [stringToCopy], [instanceToCopy]): Copies a string from the current line of window, including color information in decho format.; See also: decho()

Available in Mudlet4.8+

Parameters

window (optional):

the window to copy the text from. Defaults to "main".

stringToCopy (optional):

the string to copy. Defaults to copying the entire line.

instanceToCopy (optional):

the instance of the string to copy. Defaults to 1.

Example

-- This copies the current line on the main console and dechos it to a miniconsole named "test"
decho("test", copy2decho())

-- This when put into a trigger would copy matches[2] with color information and decho it to a Geyser miniconsole stored as the variable enemylist
enemylist:decho(copy2decho(matches[2]))

copy2html

copy2html([window], [stringToCopy], [instanceToCopy]): Copies a string from the current line of window, including color information in html format for echoing to a label.

Available in Mudlet4.8+

Parameters

window (optional):

the window to copy the text from. Defaults to "main"

stringToCopy (optional):

the string to copy. Defaults to copying the entire line

instanceToCopy (optional):

the instance of the string to copy. Defaults to 1

Example

-- This copies the current line on the main console and echos it to a label named "TestLabel"
echo("TestLabel", copy2html())

-- This when put into a trigger would copy matches[2] with color information and echo it to a Geyser label stored as the variable enemylist
enemylist:echo(copy2html(matches[2]))

createBuffer

createBuffer(name): Creates a named buffer for formatted text, much like a miniconsole, but the buffer is not intended to be shown on the screen - use it for formatting text or storing formatted text.

Parameters

name:

The name of the buffer to create.

Example

--This creates a named buffer called "scratchpad"
createBuffer("scratchpad")

createCommandLine

createCommandLine([name of userwindow], name, x, y, width, height): Creates a new command line inside the main window of Mudlet. If only a command line inside a miniConsole/UserWindow is needed see enableCommandLine().; You can use appendCmdLine() / getCmdLine() and other command line functions to customize the input.

Note: setCmdLineAction allows you to attach an action to your command line input.

Returns true or false.

Parameters

name of userwindow:

Name of userwindow the command line is created in. Optional, defaults to the main window if not provided.

name:

The name of the command line. Must be unique. Passed as a string.

x, y, width, height

Parameters to set the command line size and location - it is also possible to set them by using moveWindow() and resizeWindow(), as createCommandLine() will only set them once.

Available in Mudlet4.10+

createConsole

createConsole([name of userwindow], consoleName, fontSize, charsPerLine, numberOfLines, Xpos, Ypos): Makes a new miniconsole which can be sized based upon the width of a 'W' character and the extreme top and bottom positions any character of the font should use. The background will be black, and the text color white.

Parameters

name of userwindow:

Name of userwindow your new miniconsole is created in. Optional, defaults to the main window if not provided.

consoleName:

The name of your new miniconsole. Passed as a string.

fontSize:

The font size to use for the miniconsole. Passed as an integer number.

charsPerLine:

How many characters wide to make the miniconsole. Passed as an integer number.

numberOfLines:

How many lines high to make the miniconsole. Passed as an integer number.

Xpos:

X position of miniconsole. Measured in pixels, with 0 being the very left. Passed as an integer number.

Ypos:

Y position of miniconsole. Measured in pixels, with 0 being the very top. Passed as an integer number.

Note: userwindow argument only available in 4.6.1+

Example

-- this will create a console with the name of "myConsoleWindow", font size 8, 80 characters wide,
-- 20 lines high, at coordinates 300x,400y
createConsole("myConsoleWindow", 8, 80, 20, 200, 400)

Note:

(For Mudlet Makers) This function is implemented outside the application's core via the GUIUtils.lua file of the Mudlet supporting Lua code using createMiniConsole() and other functions to position and size the mini-console and configure the font.

createGauge

createGauge([name of userwindow], name, width, height, Xpos, Ypos, gaugeText, r, g, b, orientation)
createGauge([name of userwindow], name, width, height, Xpos, Ypos, gaugeText, colorName, orientation): Creates a gauge that you can use to express completion with. For example, you can use this as your healthbar or xpbar.; See also: moveGauge(), setGauge(), setGaugeText(), setGaugeStyleSheet()

Parameters

name of userwindow:

Name of userwindow the gauge is created in. Optional, defaults to the main window if not provided.

name:

The name of the gauge. Must be unique, you can not have two or more gauges with the same name. Passed as a string.

width:

The width of the gauge, in pixels. Passed as an integer number.

height:

The height of the gauge, in pixels. Passed as an integer number.

Xpos:

X position of gauge. Measured in pixels, with 0 being the very left. Passed as an integer number.

Ypos:

Y position of gauge. Measured in pixels, with 0 being the very top. Passed as an integer number.

gaugeText:

Text to display on the gauge. Passed as a string, unless you do not wish to have any text, in which case you pass nil

r:

The red component of the gauge color. Passed as an integer number from 0 to 255

g:

The green component of the gauge color. Passed as an integer number from 0 to 255

b:

The blue component of the gauge color. Passed as an integer number from 0 to 255

colorName:

the name of color for the gauge. Passed as a string.

orientation:

the gauge orientation. Can be horizontal (fills from left to right), vertical (fills bottom to top), goofy (fills right to left), or batty (fills top to bottom).

Note: userwindow argument only available in 4.6.1+

Example

-- This would make a gauge at that's 300px width, 20px in height, located at Xpos and Ypos and is green.
-- The second example is using the same names you'd use for something like [[fg]]() or [[bg]]().
createGauge("healthBar", 300, 20, 30, 300, nil, 0, 255, 0)
createGauge("healthBar", 300, 20, 30, 300, nil, "green")


-- If you wish to have some text on your label, you'll change the nil part and make it look like this:
createGauge("healthBar", 300, 20, 30, 300, "Now with some text", 0, 255, 0)
-- or
createGauge("healthBar", 300, 20, 30, 300, "Now with some text", "green")

Note:

If you want to put text on the back of the gauge when it's low, use an echo with the <gauge name>_back.

echo("healthBar_back", "This is a test of putting text on the back of the gauge!")

createLabel

createLabel([name of userwindow], name, Xpos, Ypos, width, height, fillBackground, [enableClickthrough]): Creates a highly manipulable overlay which can take some css and html code for text formatting. Labels are clickable, and as such can be used as a sort of button. Labels are meant for small variable or prompt displays, messages, images, and the like. You should not use them for larger text displays or things which will be updated rapidly and in high volume, as they are much slower than miniconsoles.; Returns true or false.; See also: hideWindow(), showWindow(), resizeWindow(), setLabelClickCallback(), setTextFormat(), getTextFormat(), moveWindow(), setBackgroundColor(), getMainWindowSize(), calcFontSize(), deleteLabel()

Parameters

name of userwindow: Name of userwindow label is created in. Optional, defaults to the main window if not provided.
name: name of the label. Must be unique, you can not have two or more labels with the same name. Passed as a string.
Xpos: X position of the label. Measured in pixels, with 0 being the very left. Passed as an integer number.
Ypos: Y position of the label. Measured in pixels, with 0 being the very top. Passed as an integer number.
width: width of the label, in pixels. Passed as an integer number.
height: height of the label, in pixels. Passed as an integer number.
fillBackground: whether or not to display the background. Passed as integer number (1 or 0) or as boolean (true, false). 1 or true will display the background color, 0 or false will not.
enableClickthrough: whether or not enable clickthrough on this label. Passed as integer number (1 or 0) or as boolean (true, false). 1 or true will enable clickthrough, 0 or false will not. Optional, defaults to clickthrough not enabled if not provided.

Note: userwindow argument only available in 4.6.1+

Example

-- a label situated at x=300 y=400 with dimensions 100x200
createLabel("a very basic label",300,400,100,200,1)

-- this example creates a transparent overlay message box to show a big warning message "You are under attack!" in the middle
-- of the screen. Because the background color has a transparency level of 150 (0-255, with 0 being completely transparent
-- and 255 opaque) the background text can still be read through.
local width, height = getMainWindowSize()
createLabel("messageBox",(width/2)-300,(height/2)-100,250,150,1)
resizeWindow("messageBox",500,70)
moveWindow("messageBox", (width/2)-300,(height/2)-100 )
setBackgroundColor("messageBox", 255, 204, 0, 200)
echo("messageBox", [[<p style="font-size:35px"><b><center><font color="red">You are under attack!</font></center></b></p>]])

-- you can also make it react to clicks!
mynamespace = {
  messageBoxClicked = function()
    echo("hey you've clicked the box!\n")
  end
}

setLabelClickCallback("messageBox", "mynamespace.messageBoxClicked")


-- uncomment code below to make it also hide after a short while
-- tempTimer(2.3, [[hideWindow("messageBox")]] ) -- close the warning message box after 2.3 seconds

createMiniConsole

createMiniConsole([name of userwindow], name, x, y, width, height): Opens a miniconsole window inside the main window of Mudlet. This is the ideal fast colored text display for everything that requires a bit more text, such as status screens, chat windows, etc. Unlike labels, you cannot have transparency in them.; You can use clearWindow() / moveCursor() and other functions for this window for custom printing as well as copy & paste functions for colored text copies from the main window. setWindowWrap() will allow you to set word wrapping, and move the main window to make room for miniconsole windows on your screen (if you want to do this as you can also layer mini console and label windows) see setBorderSizes(), setBorderColor() functions.

Returns true or false.

Parameters

name of userwindow: (available in Mudlet 4.6.1+)

(Optional) name of userwindow the miniconsole is created in. Defaults to the main window if not provided.

name:

The name of the miniconsole. Must be unique. Passed as a string.

x, y, width, height

Parameters to set set the window size and location - in Mudlet version 2.1 and below it's best to set them via moveWindow() and resizeWindow(), as createMiniConsole() will only set them once. Starting with Mudlet version 3.0, however, that is fine and calling createMiniConsole() will re-position your miniconsole appropriately.

createScrollBox

createScrollBox([name of parent window], name, x, y, width, height)

creates a graphical elements able to hold other graphical elements such as labels, miniconsoles, command lines etc. in it.

If the added elements don't fit into the ScrollBox scrollbars appear and allow scrolling.

Returns true or false.

Available in Mudlet4.15+

Parameters

name of parent window:

(Optional) name of the parent window the scrollBox is created in. Defaults to the main window if not provided.

name:

The name of the scrollBox. Must be unique. Passed as a string.

x, y, width, height

Parameters to set set the window size and location

Example

-- create a ScrollBox with the name sBox
createScrollBox("SBox",0,0,300,200)

-- create 3 Labels and put them into the ScrollBox
createLabel("SBox","SBoxLabel",0,0,200,200,1)
createLabel("SBox","SBoxLabel2",200,0,200,200,1)
createLabel("SBox","SBoxLabel3",400,0,200,200,1)

-- put some text on the labels
echo("SBoxLabel","Label")
echo("SBoxLabel2","Label2")
echo("SBoxLabel3","Label3")

-- change the colours of the labels to make it easier to distinguish them
setBackgroundColor("SBoxLabel",255,0,0)
setBackgroundColor("SBoxLabel2",0,255,0)
setBackgroundColor("SBoxLabel3",0,0,255)

creplace

creplace([window, ]text): Replaces the output line from the game with a colour-tagged string.

creplaceLine

creplaceLine ([window], text): Replaces the output line from the game with a colour-tagged string.

decho

decho ([name of console,] text): Color changes can be made using the format <FR,FG,FB:BR,BG,BB,[BA]> where each field is a number from 0 to 255. The background portion can be omitted using <FR,FG,FB> or the foreground portion can be omitted using <:BR,BG,BB,[BA]>. Arguments 2 and 3 set the default fore and background colors for the string using the same format as is used within the string, sans angle brackets, e.g. decho("<50,50,0:0,255,0>test").; You can also include the below tags.

Formatting

<b>  - bold
</b> - bold off
<i>  - italics
</i> - italics off
<u>  - underline
</u> - underline off
<o>  - overline
</o> - overline off
<s>  - strikethrough
</s> - strikethrough off
<r> - reset formatting

Note: Support for labels added in Mudlet 4.15; however, it does not turn a label into a miniconsole and every time you decho it will erase any previous echo sent to the label.

See also: cecho(), hecho(), copy2decho()

Parameters

name of console

(Optional) Name of the console to echo to. If no name is given, this will defaults to the main window.

text:

The text that you’d like to echo with embedded color tags. Tags take the RGB values only, see below for an explanation.

Note: Optional background transparancy parameter (BA) available in Mudlet 4.10+

Example

decho("<50,50,0:0,255,0>test")

decho("miniconsolename", "<50,50,0:0,255,0>test")

decho("\n<255,0,0>Red text with <i>italics</i>, <u>underline</u>, <s>strikethrough</s>, and <b>bold</b> formatting.")

decho("<\n<0,128,0><o><u>Green text with both over and underlines.</u></o>")

decho2ansi

ansiFormattedString = decho2ansi(text)

Converts decho formatted text to ansi formatted text. Used by dfeedTriggers, but useful if you want ansi formatted text for any other reason.

See also: decho(), dfeedTriggers()

Available in Mudlet4.10++

Note: non-color formatting added in Mudlet 4.15+

Parameters

text:

The decho formatted text for conversion

Returns

String converted to ansi formatting

Example

-- replicates the functionality of dfeedTriggers() for a single line.
-- you would most likely just use dfeedTriggers, but it makes for a tidy example.
feedTriggers(decho2ansi("\n<128,0,0>This is red.<r> <i>italic</i>, <b>bold</b>, <s>strikethrough</s>, <u>underline</u>\n"))

dechoLink

dechoLink([windowName], text, command, hint, true): Echos a piece of text as a clickable link, at the end of the current selected line - similar to decho(). This version allows you to use colours within your link text.

Parameters

windowName:

(optional) allows selection between sending the link to a miniconsole or the "main" window.

text:

text to display in the echo. Same as a normal decho().

command:

Lua code to do when the link is clicked, as text or a function (since Mudlet 4.11).

hint:

text for the tooltip to be displayed when the mouse is over the link.

true:

requires argument for the colouring to work.

Example

-- echo a link named 'press me!' that'll send the 'hi' command to the game
dechoLink("<50,50,0:0,255,0>press me!", function() send("hi") end, "This is a tooltip", true)

-- alternatively, put command as text (in [[ and ]] to use quotation marks inside)
dechoLink("<50,50,0:0,255,0>press me!", [[send("hi")]], "This is a tooltip", true)

dechoPopup

dechoPopup([windowName], text, {commands}, {hints}, [useCurrentFormatElseDefault]): Creates text with a left-clickable link, and a right-click menu for more options at the end of the current line, like decho(). The added text, upon being left-clicked, will do the first command in the list. Upon being right-clicked, it'll display a menu with all possible commands. The menu will be populated with hints, one for each line.

Available in Mudlet4.1+

Parameters

windowName:

(optional) name of the window to echo to. Use either main or omit for the main window, or the miniconsoles name otherwise.

text:

the text to display

{commands}:

a table of lua code strings to do or a functions (since Mudlet 4.11). ie, {[[send("hello")]], function() echo("hi!") end}

{hints}:

a table of lua code to do, in text strings or as functions (since Mudlet 4.11), i.e. {"send the hi command", "echo hi to yourself"}

useCurrentFormatElseDefault:

(optional) a boolean value for using either the current formatting options (colour, underline, italic) or the link default (blue underline).

Example

-- Create some text as a clickable with a popup menu:
dechoPopup("<255,0,0>activities<r> to do", {function() send "sleep" end, function() send "sit" end, function() send "stand" end}, {"sleep", "sit", "stand"}, true)

-- alternatively, put command as text (in [[ and ]] to use quotation marks inside)
dechoPopup("<255,0,0>activities<r> to do", {[[send "sleep"]], [[send "sit"]], [[send "stand"]]}, {"sleep", "sit", "stand"}, true)

dinsertLink

dinsertLink([windowName], text, command, hint, true): Echos a piece of text as a clickable link, at the end of the current cursor position - similar to dinsertText(). This version allows you to use colours within your link text.

dinsertPopup

dinsertPopup([windowName], text, {commands}, {hints}, [useCurrentFormatElseDefault]): Creates text with a left-clickable link, and a right-click menu for more options at the end of the current cursor position, like dinsertText(). The added text, upon being left-clicked, will do the first command in the list. Upon being right-clicked, it'll display a menu with all possible commands. The menu will be populated with hints, one for each line.

Available in Mudlet4.1+

Parameters

windowName:

(optional) name of the window to echo to. Use either main or omit for the main window, or the miniconsoles name otherwise.

text:

the text to display

{commands}:

a table of lua code to do, in text strings or as functions (since Mudlet 4.11), i.e. {[[send("hello")]], function() echo("hi!") end}

{hints}:

a table of strings which will be shown on the popup and right-click menu. ie, {"send the hi command", "echo hi to yourself"}

useCurrentFormatElseDefault:

(optional) a boolean value for using either the current formatting options (colour, underline, italic) or the link default (blue underline).

Example

-- Create some text as a clickable with a popup menu:
dinsertPopup("<255,0,0>activities<r> to do", {function() send "sleep" end, function() send "sit" end, function() send "stand" end}, {"sleep", "sit", "stand"}, true)

-- alternatively, put command as text (in [[ and ]] to use quotation marks inside)
dinsertPopup("<255,0,0>activities<r> to do", {[[send "sleep"]], [[send "sit"]], [[send "stand"]]}, {"sleep", "sit", "stand"}, true)

deleteLabel

deleteLabel(labelName)

Deletes and removes a label from the screen. Note that if you'd like to show the label again, it is much more performant to hide/show it instead.

Note that you shouldn't use the Geyser label associated with the label you delete afterwards - that doesn't make sense and Geyser right now wouldn't know that it's been deleted, either.

Parameters

labelName: name of the label to delete.

createLabel("a very basic label",300,400,100,200,1)
setBackgroundColor("a very basic label", 255, 204, 0, 200)

-- delete the label after 3 seconds
tempTimer(3, function()
  deleteLabel("a very basic label")
end)

Available in Mudlet4.5+

deleteLine

deleteLine([windowName]): Deletes the current line under the user cursor. This is a high speed gagging tool and is very good at this task, but is only meant to be use when a line should be omitted entirely in the output. If you echo() to that line it will not be shown, and lines deleted with deleteLine() are simply no longer rendered. This is purely visual - triggers will still fire on the line as expected.; See also: replace(), wrapLine()

Parameters

windowName:

(optional) name of the window to delete the line in. If no name is given, it just deletes the line it is used on.

Note: for replacing text, replace() is the proper option; doing the following: selectCurrentLine(); replace(""); cecho("new line!\n") is better.

Example

-- deletes the line - just put this command into the big script box. Keep the case the same -
-- it has to be deleteLine(), not Deleteline(), deleteline() or anything else
deleteLine()

--This example creates a temporary line trigger to test if the next line is a prompt, and if so gags it entirely.
--This can be useful for keeping a pile of prompts from forming if you're gagging chat channels in the main window
--Note: isPrompt() only works on servers which send a GA signal with their prompt.
tempLineTrigger(1, 1, [[if isPrompt() then deleteLine() end]])

-- example of deleting multiple lines:
deleteLine()                            -- delete the current line
moveCursor(0,getLineNumber()-1)         -- move the cursor back one line
deleteLine()                            -- delete the previous line now

deselect

deselect([window name]): This is used to clear the current selection (to no longer have anything selected). Should be used after changing the formatting of text, to keep from accidentally changing the text again later with another formatting call.; See also: selectString(), selectCurrentLine()

Parameters

window name:

(optional) The name of the window to stop having anything selected in. If name is not provided the main window will have its selection cleared.

Example

--This will change the background on an entire line in the main window to red, and then properly clear the selection to keep further
--changes from effecting this line as well.
selectCurrentLine()
bg("red")
deselect()

disableClickthrough

disableClickthrough(label): Disables clickthrough for a label - making it act 'normal' again and receive clicks, doubleclicks, onEnter, and onLeave events. This is the default behaviour for labels.; See also: enableClickthrough()

Parameters

label:

Name of the label to restore clickability on.

Available in Mudlet3.17+

disableCommandLine

disableCommandLine(windowName): Disables the command line for the miniConsole named windowName; See Also: enableCommandLine()

Parameters

windowName:

The name of the miniConsole to disable the command line in.

Available in Mudlet4.10+

disableHorizontalScrollBar

disableHorizontalScrollBar([windowName]): Disables the horizontal scroll bar for the miniConsole/userwindow windowName or the main window; See Also: enableHorizontalScrollBar()

Parameters

windowName:

The name of the window to disable the scroll bar in. If "main" or not provided it is the main console.

Available in Mudlet4.10+

disableScrollBar

disableScrollBar([windowName]): Disables the scroll bar for the miniConsole/userwindow windowName or the main window; See Also: enableScrollBar()

Parameters

windowName:

(optional) The name of the window to disable the scroll bar in. If "main" or not provided it is the main console.

dreplace

dreplace([window, ]text): Replaces the output line from the game with a colour-tagged string.

dreplaceLine

dreplaceLine ([window], text): Replaces the output line from the game with a colour-tagged string.

Available in Mudlet4.12+

echoLink

echoLink([windowName], text, command, hint, [useCurrentFormatElseDefault]): Echos a piece of text as a clickable link, at the end of the current selected line - similar to echo().

echoUserWindow

echoUserWindow(windowName, text): This function will print text to both mini console windows, dock windows and labels. It is outdated however - echo() instead.

echoPopup

echoPopup([windowName], text, {commands}, {hints}, [useCurrentFormatElseDefault]): Creates text with a left-clickable link, and a right-click menu for more options at the end of the current line, like echo. The added text, upon being left-clicked, will do the first command in the list. Upon being right-clicked, it'll display a menu with all possible commands. The menu will be populated with hints, one for each line.

Parameters

windowName:

(optional) name of the window to echo to. Use either main or omit for the main window, or the miniconsoles name otherwise.

text:

the text to display

{commands}:

a table of lua code to do, in text strings or as functions (since Mudlet 4.11), i.e. {[[send("hello")]], function() echo("hi!") end}

{hints}:

a table of strings which will be shown on the popup and right-click menu. i.e. {"send the hi command", "echo hi to yourself"}

useCurrentFormatElseDefault:

(optional) a boolean value for using either the current formatting options (colour, underline, italic) or the link default (blue underline).

Example

-- Create some text as a clickable with a popup menu:
echoPopup("activities to do", {function() send "sleep" end, function() send "sit" end, function() send "stand" end}, {"sleep", "sit", "stand"})

-- alternatively, put commands as text (in [[ and ]] to use quotation marks inside)
echoPopup("activities to do", {[[send "sleep"]], [[send "sit"]], [[send "stand"]]}, {"sleep", "sit", "stand"})

enableClickthrough

enableClickthrough(label): Make a label 'invisible' to clicks - so if you have another label underneath, it'll be clicked on instead of this one on top.; This affects clicks, double-clicks, right-clicks, as well as the onEnter/onLeave events.; See also: disableClickthrough()

Parameters

label:

The name of the label to enable clickthrough on.

Available in Mudlet3.17+

enableCommandLine

enableCommandLine(windowName): Enables the command line for the miniConsole named windowName; See Also: disableCommandLine()

Parameters

windowName:

The name of the miniConsole to enable the command line in.

Note: The command line name is the same as the miniConsole name

Available in Mudlet4.10+

enableHorizontalScrollBar

enableHorizontalScrollBar([windowName]): Enables the horizontal scroll bar for the miniConsole/userwindow windowName or the main window; See Also: disableHorizontalScrollBar()

Parameters

windowName:

The name of the window to enable the scroll bar in. If "main" or not provided it is the main console.

Available in Mudlet4.10+

enableScrollBar

enableScrollBar([windowName]): Enables the scroll bar for the miniConsole/userwindow windowName or the main window; See Also: disableScrollBar()

Parameters

windowName:

The name of the window to enable the scroll bar in. If "main" or not provided it is the main console.

fg

fg([window], colorName): If used on a selection, sets the foreground color to colorName - otherwise, it will set the color of the next text-inserting calls (echo(), insertText, echoLink(), and others); See Also: bg(), setBgColor()

Parameters

window:

(optional) name of the miniconsole to operate on. If you'd like it to work on the main window, don't specify anything or use main (since Mudlet 3.0).

colorName:

The name of the color to set the foreground to - list of possible names:

Example

--This would change the color of the text on the current line to green
selectCurrentLine()
fg("green")
resetFormat()

--This will echo red, green, blue in their respective colors
fg("red")
echo("red ")
fg("green")
echo("green ")
fg("blue")
echo("blue ")
resetFormat()

-- example of working on a miniconsole
fg("my console", "red")
echo("my console", "red text")

getAvailableFonts

getAvailableFonts(): This returns a "font - true" key-value list of available fonts which you can use to verify that Mudlet has access to a given font.; To install a new font with your package, include the font file in your zip/mpackage and it'll be automatically installed for you.

getBackgroundColor

getBackgroundColor([windowName]): Gets the background for the given label, miniconsole, or userwindow.; Returns 4 values - red, green, blue, transparency. Colors returned are from 0 to 255 (0 being black), and transparency is from 0 to 255 (0 being completely transparent).

Parameters

windowName:

(optional) name of the label/miniconsole/userwindow to getthe background color from, or "main" for the main window.

Available in Mudlet4.15+

Example

local r, g, b, a = getBackgroundColor()
local rW, gW, bW, aW = getBackgroundColor("myWindow")

getBgColor

getBgColor(windowName): This function returns the rgb values of the background color of the first character of the current selection on mini console (window) windowName. If windowName is omitted Mudlet will use the main screen.

getBorderBottom

getBorderBottom(): Returns the size of the bottom border of the main window in pixels.; See also: getBorderSizes(), setBorderBottom()

Available in Mudlet4.0+

Example

setBorderBottom(150)
getBorderBottom()
-- returns: 150

getBorderLeft

getBorderLeft(): Returns the size of the left border of the main window in pixels.; See also: getBorderSizes(), setBorderLeft()

Available in Mudlet4.0+

Example

setBorderLeft(5)
getBorderLeft()
-- returns: 5

getBorderRight

getBorderRight(): Returns the size of the right border of the main window in pixels.; See also: getBorderSizes(), setBorderRight()

Available in Mudlet4.0+

Example

setBorderRight(50)
getBorderRight()
-- returns: 50

getBorderSizes

getBorderSizes(): Returns the a named table with the sizes of all borders of the main window in pixels.; See also: setBorderSizes(), getBorderTop(), getBorderRight(),getBorderBottom(), getBorderLeft()

Available in Mudlet4.0+

Example

setBorderSizes(100, 50, 150, 0)
getBorderSizes()
-- returns: { top = 100, right = 50, bottom = 150, left = 0 }
getBorderSizes().right
-- returns: 50

getBorderTop

getBorderTop(): Returns the size of the top border of the main window in pixels.; See also: getBorderSizes(), setBorderTop()

Available in Mudlet4.0+

Example

setBorderTop(100)
getBorderTop()
-- returns: 100

getClipboardText

getClipboardText(): Returns any text that is currently present in the clipboard.; See also: setClipboardText()

Note: Note: Available in Mudlet 4.10+

Example

local clipboardContents = getClipboardText()
echo("Clipboard: " .. clipboardContents)

getColorWildcard

getColorWildcard(ansi color number): This function, given an ANSI color number (list), will return all strings on the current line that match it.

See also: isAnsiFgColor(), isAnsiBgColor()

Parameters

ansi color number:

A color number (list) to match.

Example

-- we can run this script on a line that has the players name coloured differently to easily capture it from
-- anywhere on the line
local match = getColorWildcard(14) -- this will be a table of every match

if match then -- if there's a table, then we try and print it on the screen!
  echo("\nFound "..table.concat(match, ", ").."!") -- this will combine all captured strings and separate them with a comma so it's easy to read.
else -- if there isn't something in match, then we haven't found anything to print on the screen!
  echo("\nDidn't find anyone.") 
end

getColumnCount

getColumnCount([windowName]): Gets the maximum number of columns (characters) that a given window can display on a single row, taking into consideration factors such as window width, font size, spacing, etc.

Parameters

windowName:

(optional) name of the window whose number of columns we want to calculate. By default it operates on the main window.

Available in Mudlet3.7+

Example

print("Maximum number of columns on the main window "..getColumnCount())

getColumnNumber

getColumnNumber([windowName]): Gets the absolute column number of the current user cursor.

Parameters

windowName:

(optional) either be none or "main" for the main console, or a miniconsole / userwindow name.

Note: the argument is available since Mudlet 3.0.

Example

HelloWorld = Geyser.MiniConsole:new({
  name="HelloWorld",
  x="70%", y="50%",
  width="30%", height="50%",
})

HelloWorld:echo("hello!\n")
HelloWorld:echo("hello!\n")
HelloWorld:echo("hello!\n")

moveCursor("HelloWorld", 3, getLastLineNumber("HelloWorld"))
-- should say 3, because we moved the cursor in the HellWorld window to the 3rd position in the line
print("getColumnNumber: "..tostring(getColumnNumber("HelloWorld")))

moveCursor("HelloWorld", 1, getLastLineNumber("HelloWorld"))
-- should say 3, because we moved the cursor in the HellWorld window to the 1st position in the line
print("getColumnNumber: "..tostring(getColumnNumber("HelloWorld")))

getCurrentLine

getCurrentLine([windowName]): Returns the content of the current line under the user cursor in the buffer. The Lua variable line holds the content of getCurrentLine() before any triggers have been run on this line. When triggers change the content of the buffer, the variable line will not be adjusted and thus hold an outdated string. line = getCurrentLine() will update line to the real content of the current buffer. This is important if you want to copy the current line after it has been changed by some triggers. selectString( line,1 ) will return false and won't select anything because line no longer equals getCurrentLine(). Consequently, selectString( getCurrentLine(), 1 ) is what you need.

Parameters

windowName:

(optional) name of the window in which to select text.

Example

print("Currently selected line: "..getCurrentLine())

getFgColor

getFgColor(windowName): This function returns the rgb values of the color of the first character of the current selection on mini console (window) windowName. If windowName is omitted Mudlet will use the main screen.

Parameters

windowName:

A window to operate on - either a miniconsole or the main window.

Example

selectString("troll",1)
local r,g,b = getFgColor()
if r == 255 and g == 0 and b == 0 then
  echo("HELP! troll is written in red letters, the monster is aggressive!\n")
end

getFont

getFont([windowName]): Gets the current font of the given window or console name. Can be used to get font of the main console, dockable userwindows and miniconsoles.; See also: setFont(), setFontSize(), openUserWindow(), getAvailableFonts()

Available in Mudlet3.4+

Note: Since Mudlet 3.10, returns the actual font that was used in case you didn't have the required font when using setFont().

Parameters

windowName:

The window name to get font size of - can either be none or "main" for the main console, or a miniconsole/userwindow name.

Example

-- The following will get the "main" console font size.
display("Font in the main window: "..getFont())

display("Font in the main window: "..getFont("main"))

-- This will get the font size of a user window named "user window awesome".
display("Font size: " .. getFont("user window awesome"))

getFontSize

getFontSize([windowName]): Gets the current font size of the given window or console name. Can be used to get font size of the Main console as well as dockable UserWindows.; See also: setFontSize(), openUserWindow()

Parameters

windowName:

The window name to get font size of - can either be none or "main" for the main console, or a UserWindow name.

Available in Mudlet3.4+

Example

-- The following will get the "main" console font size.
local mainWindowFontSize = getFontSize()
if mainWindowFontSize then
    display("Font size: " .. mainWindowFontSize)
end

local mainWindowFontSize = getFontSize("main")
if mainWindowFontSize then
    display("Font size: " .. fs2)
end

-- This will get the font size of a user window named "user window awesome".
local awesomeWindowFontSize = getFontSize("user window awesome")
if awesomeWindowFontSize then
    display("Font size: " .. awesomeWindowFontSize)
end

getHTMLformat

spanTag = getHTMLformat(formatTable)

Takes in a table of formatting options in the same style as getTextFormat() and returns a span tag which will format text after it as the table describes.

See also: getTextFormat(), getLabelFormat()

Available in Mudlet4.15+

Parameters

formatTable:

Table with formatting options configured. Keys are foreground, background, bold, underline, overline, strikeout, italic, and reverse. All except for foreground and background should be boolean (true/false) values. Foreground and background are either { r, g, b, a } tables, or strings with QSS formatting directives

Returns

A string with the html span tag to format text in accordance with the format table.

Example

-- Returns a span tag for bold, red text on a green background
local span = getHTMLformat({
  foreground = { 255, 0, 0 },
  background = "#00FF00",
  bold = true
})

-- span will be '<span style="color: rgb(255, 0, 0);background-color: #00FF00; font-weight: bold; font-style: normal; text-decoration: none;">'

getImageSize

getImageSize(imageLocation): Returns the width and the height of the given image. If the image can't be found, loaded, or isn't a valid image file - nil+error message will be returned instead.; See also: createLabel()

Parameters

imageLocation:

Path to the image.

Available in Mudlet4.5+

Example

local path = getMudletHomeDir().."/my-image.png"

cecho("Showing dimensions of the picture in: "..path.."\n")

local width, height = getImageSize(path)

if not width then
  -- in case of an problem, we don't get a height back - but the error message
  cecho("error: "..height.."\n")
else
  cecho(string.format("They are: %sx%s", width, height))
end

getLabelFormat

formatTable = getLabelFormat(labelName)

Returns a format table like the one returned by getTextFormat and suitable for getHTMLformat which will format text the same way as simply doing an echo to the label would

See also: getTextFormat(), getHTMLformat()

Available in Mudlet4.15+

Parameters

labelName:

The name of the label to scan the format of

Returns

A table with all the formatting options to achieve a default text format for label labelName.

Example

-- creates a test label, sets a stylesheet, and then returns the default format table for that label.
createLabel("testLabel", 10, 10, 300, 200, 1)
setLabelStyleSheet([[
  color: rgb(0,0,180);
  border-width: 1px;
  border-style: solid;
  border-color: gold;
  border-radius: 10px;
  font-size: 12.0pt;
  background: QLinearGradient( x1: 0, y1: 0, x2: 0, y2: 1, stop: 0 #98f041, stop: 0.1 #8cf029, stop: 0.49 #66cc00, stop: 0.5 #52a300, stop: 1 #66cc00);
]])
local fmt = getLabelFormat("testLabel"))

--[[
{
  background = "rgba(0, 0, 0, 0)", -- this is transparent
  bold = false,
  foreground = "rgb(0,0,180)",
  italic = false,
  overline = false,
  reverse = false,
  strikeout = false,
  underline = false
}
--]]

getLabelSizeHint

width, height = getLabelSizeHint(labelName)

Returns the suggested labelsize as width and height

See also: getTextFormat(), getHTMLformat()

Available in Mudlet4.15+

Parameters

labelName:

The name of the label to get the suggested size from

Returns

suggested width and height (to fit text and/or an image on a label)

Example

-- text resizing example
-- create the label
createLabel("textLabel",400,400,300,300,1)
-- put some text on it
echo("textLabel", "This is my Test.\nAnother Test")
-- resizes the label to fit the text
resizeWindow("textLabel", getLabelSizeHint("textLabel"))

-- image resizing example
-- create the label
createLabel("imageLabel",400,400,300,300,1)
-- put some image on it
setBackgroundImage("imageLabel", getMudletHomeDir.."/myLabelImage.png")
-- resizes the label to fit the image
resizeWindow("imageLabel", getLabelSizeHint("imageLabel"))

getLabelStyleSheet

getLabelStyleSheet(labelName): Returns the stylesheet set on a given label, which is used to customise the labels look and feel.

See also: getTextFormat()

Available in Mudlet4.15+

Parameters

labelName:

The name of the label to get the stylesheet from

Returns

stylesheet as a string

Example

createLabel("test", 50, 50, 100, 100, 0)
setLabelStyleSheet("test", [[
  background-color: white;
  border: 10px solid green;
  font-size: 12px;
  ]])
echo("test", "test")

-- now retrieve it and display:
local stylesheet = getLabelStyleSheet("test")
cecho(f"<green>the label's stylesheet is now: \n<white>{stylesheet}\n")

getLastLineNumber

getLastLineNumber(windowName): Returns the latest line's number in the main window or the miniconsole. This could be different from getLineNumber() if the cursor was moved around.

Parameters

windowName:

name of the window to use. Either use main for the main window, or the name of the miniconsole.

Example

-- get the latest line's # in the buffer
local latestline = getLastLineNumber("main")

getLineCount

getLineCount([windowName]): Gets the absolute amount of lines in the current console buffer

Parameters

windowName

Optional name of the window to get the line count of. Defaults to the main window.

Example

echo("Main window has " .. getLineCount() .. " lines of text in it.")

getLines

getLines([windowName,] from_line_number, to_line_number): Returns a section of the content of the screen text buffer. Returns a Lua table with the content of the lines on a per line basis. The form value is result = {relative_linenumber = line}.

Absolute line numbers are used.

Parameters

windowName

(optional) name of the miniconsole/userwindow to get lines for, or "main" for the main window (Mudlet 3.17+)

from_line_number:

First line number

to_line_number:

End line number

Example

-- retrieve & echo the last line:
echo(getLines(getLineNumber()-1, getLineNumber())[1])

-- find out which server and port you are connected to (as per Mudlet settings dialog):
local t = getLines(0, getLineNumber())

local server, port

for i = 1, #t do
  local s, p = t[i]:match("looking up the IP address of server:(.-):(%d+)")
  if s then server, port = s, p break end
end

display(server)
display(port)

getLineNumber

getLineNumber([windowName]): Returns the absolute line number of the current user cursor (the y position). The cursor by default is on the current line the triggers are processing - which you can move around with moveCursor() and moveCursorEnd(). This function can come in handy in combination when using with moveCursor() and getLines().

Parameters

windowName:

(optional) name of the miniconsole to operate on. If you'd like it to work on the main window, don't specify anything.

Note: The argument is available since Mudlet 3.0.

Example

-- use getLines() in conjuction with getLineNumber() to check if the previous line has a certain word
if getLines(getLineNumber()-1, getLineNumber())[1]:find("attacks") then echo("previous line had the word 'attacks' in it!\n") end

-- check how many lines you've got in your miniconsole after echoing some text.
-- Note the use of moveCursorEnd() to update getLineNumber()'s output
HelloWorld = Geyser.MiniConsole:new({
  name="HelloWorld",
  x="70%", y="50%",
  width="30%", height="50%",
})

print(getLineNumber("HelloWorld"))

HelloWorld:echo("hello!\n")
HelloWorld:echo("hello!\n")
HelloWorld:echo("hello!\n")

-- update the cursors position, as it seems to be necessary to do
moveCursorEnd("HelloWorld")
print(getLineNumber("HelloWorld"))

getMainConsoleWidth

getMainConsoleWidth(): Returns a single number; the width of the main console (game output) in pixels. This also accounts for any borders that have been set.

getMouseEvents

events = getMouseEvents()

Returns a table of registered mouse events, including any of the additional arguments they may have.

Available in Mudlet4.13+

See also: addMouseEvent(), removeMouseEvent()

Returns

Returns a table with mouse event uniqueName as indexes, containing all the creation arguments as the sub-table members.

getMousePosition

getMousePosition(): Returns the coordinates of the mouse's position, relative to the Mudlet window itself.

Parameters: None

Available in Mudlet3.1+

Example

-- Retrieve x and y position of the mouse to determine where to create a new label, then use that position to create a new label
local x, y = getMousePosition()
createLabel("clickGeneratedLabel", x, y, 100, 100, 1)
-- if the label already exists, just move it
moveWindow("clickGeneratedLabel", x, y)
-- and make it easier to notice
setBackgroundColor("clickGeneratedLabel", 255, 204, 0, 200)

getProfileTabNumber

getProfileTabNumber(): Returns the current tab number you're in. If you have just one profile loaded, it'll always return 1 - otherwise it'll be the nth tab that is currently open.

Parameters: None

Available in Mudlet4.11+

Example

print(f"Current playing in tab #{getProfileTabNumber()}.")

getMainWindowSize

getMainWindowSize(): Returns two numbers, the width and height in pixels of the main window.; See also: getUserWindowSize(), setMainWindowSize(), getMainConsoleWidth()

Parameters: None

Example

--this will get the size of your main mudlet window and save them
--into the variables mainHeight and mainWidth
mainWidth, mainHeight = getMainWindowSize()

getRowCount

getRowCount([windowName]): Gets the maximum number of rows that a given window can display at once, taking into consideration factors such as window height, font type, spacing, etc.

Parameters

windowName:

(optional) name of the window whose maximum number of rows we want to calculate. By default it operates on the main window.

Available in Mudlet3.7+

Example

print("Maximum of rows on the main window "..getRowCount())

getScroll

getScroll([windowName]): Returns line that the window is currently scrolled to.; See also: scrollTo, scrollUp, scrollDown

Parameters

windowName:

(optional) name of the window to ask about. Default is the main window.

Available in Mudlet4.17.0+

Example

-- button to jump to next instance of "Timbo"
local current = getScroll()
local data = getLines(current, getLineCount())
for count, line in ipairs(data) do
  local match = string.findPattern(line, "Timbo")
  if match then
    scrollTo(current + count)
    break
  end
end

getSelection

getSelection([windowName]): Returns the text currently selected with selectString(), selectSection(), or selectCurrentLine(). Note that this isn't the text currently selected with the mouse.; Also returns the start offset and length of the selection as second and third value.

Parameters

windowName:

(optional) name of the window to get the selection from. By default it operates on the main window.

Available in Mudlet3.16+

Example

selectCurrentLine()
print("Current line contains: "..getSelection())

retrieving the selection

text,offset,len = getSelection()
-- manipulate the selection, e.g. to discover the color of characters other than the first
-- then restore it
selectSection(offset, len)

getTextFormat

getTextFormat([windowName]): Gets the current text format of the currently selected text. May be used with other console windows. The returned values come in a table containing text attribute names and their values. The values given will be booleans for: bold, italics, underline, overline, strikeout, and reverse - followed by color triplet tables for the foreground and background colors.; See Also: setTextFormat()

Parameters

windowName

(optional) Specify name of selected window. If no name or "main" is given, the format will be gathered from the main console.

Available in Mudlet3.20+

Example

-- A suitable test for getTextFormat()
-- (copy it into an alias or a script)

clearWindow()

echo("\n")

local SGR = string.char(27)..'['
feedTriggers("Format attributes: '"..SGR.."1mBold"..SGR.."0m' '"..SGR.."3mItalic"..SGR.."0m' '"..SGR.."4mUnderline"..SGR.."0m' '"..SGR.."5mBlink"..SGR.."0m' '"..SGR.."6mF.Blink"..SGR.."0m' '"..SGR.."7mReverse"..SGR.."0m' '"..SGR.."9mStruckout"..SGR.."0m' '"..SGR.."53mOverline"..SGR.."0m'.\n")

moveCursor(1,1)
selectSection(1,1)

local results = getTextFormat()
echo("For first character in test line:\nBold detected: " .. tostring(results["bold"]))
echo("\nItalic detected: " .. tostring(results["italic"]))
echo("\nUnderline detected: " .. tostring(results["underline"]))
echo("\nReverse detected: " .. tostring(results["reverse"]))
echo("\nStrikeout detected: " .. tostring(results["strikeout"]))
echo("\nOverline detected: " .. tostring(results["overline"]))
echo("\nForeground color: (" .. results["foreground"][1] .. ", " .. results["foreground"][2] .. ", " .. results["foreground"][3] .. ")")
echo("\nBackground color: (" .. results["background"][1] .. ", " .. results["background"][2] .. ", " .. results["background"][3] .. ")")

selectSection(21,1)
echo("\n\nFor individual parts of test text:")
echo("\nBold detected (character 21): " .. tostring(results["bold"]))

selectSection(28,1)
echo("\nItalic detected (character 28): " .. tostring(results["italic"]))

selectSection(37,1)
echo("\nUnderline detected (character 37): " .. tostring(results["underline"]))

selectSection(67,1)
echo("\nReverse detected (character 67): " .. tostring(results["reverse"]))

selectSection(77,1)
echo("\nStrikeout detected (character 77): " .. tostring(results["strikeout"]))

selectSection(89,1)
echo("\nOverline detected (character 89): " .. tostring(results["overline"]))
echo("\n")

getUserWindowSize

getUserWindowSize(windowName): Returns two numbers, the width and height in pixels. This is useful for calculating the given userwindow dimensions.; See also: getMainWindowSize()

Parameters

windowName

the name of the userwindow we will get the dimensions from

Available in Mudlet4.6.1+

Example

--this will get the size of your userwindow named "ChatWindow" and save them
--into the variables mainHeight and mainWidth
mainWidth, mainHeight = getUserWindowSize("ChatWindow")

getWindowWrap

getWindowWrap(windowName): gets at what position in the line the will start word wrap.

Parameters

windowName:

Name of the "main" console or user-created miniconsole which you want to be wrapped differently. If you want to wrap the main window, use windowName "main" or leave empty.

Example

setWindowWrap("main", 10)
display(getWindowWrap("main"))

-- The following output will result in the main window console:
-- 10

Practical Example

-- display ======== line with maximum possible width without wrapping
echo(string.rep("=", getWindowWrap("main")))

Available in Mudlet4.11+

handleWindowResizeEvent

handleWindowResizeEvent(): (deprecated) This function is deprecated and should not be used; it's only documented here for historical reference - use the sysWindowResizeEvent event instead.

The standard implementation of this function does nothing. However, this function gets called whenever the main window is being manually resized. You can overwrite this function in your own scripts to handle window resize events yourself and e. g. adjust the screen position and size of your mini console windows, labels or other relevant GUI elements in your scripts that depend on the size of the main Window. To override this function you can simply put a function with the same name in one of your scripts thus overwriting the original empty implementation of this.

Parameters: None

Example

function handleWindowResizeEvent()
   -- determine the size of your screen
   WindowWidth=0;
   WindowHeight=0;
   WindowWidth, WindowHeight = getMainWindowSize();

   -- move mini console "sys" to the far right side of the screen whenever the screen gets resized
   moveWindow("sys",WindowWidth-300,0)
end

hasFocus

hasFocus(): Returns true or false depending if Mudlet's main window is currently in focus (ie, the user isn't focused on another window, like a browser). If multiple profiles are loaded, this can also be used to check if a given profile is in focus.

Parameters: None

Example

if attacked and not hasFocus() then
  runaway()
else
  fight()
end

hecho

hecho([windowName], text): Echoes text that can be easily formatted with colour tags in the hexadecimal format. You can also add the below tags.

Formatting

#b or |b   - bold
#/b or |/b - bold off
#i or |i   - italics
#/i or |/i - italics off
#u or |u   - underline
#/u or |/u - underline off
#o or |o   - overline
#/o or |/o - overline off
#s or |s   - strikethrough
#/s or |/s - strikethrough off
#r or |r   - reset to default

hecho2ansi

ansiFormattedString = hecho2ansi(text)

Converts hecho formatted text to ansi formatted text. Used by hfeedTriggers, but useful if you want ansi formatted text for any other reason.

See also: hecho(), hfeedTriggers()

Available in Mudlet4.10++

Note: non-color formatting added in Mudlet 4.15+

Parameters

text:

The hecho formatted text for conversion

Returns

String converted to ansi formatting

Example

-- replicates the functionality of hfeedTriggers() for a single line.
-- you would most likely just use hfeedTriggers, but it makes for a tidy example.
feedTriggers(hecho2ansi("\n#800000This is red.#r #iitalic#/i, #bbold#/b, #sstrikethrough#/s, #uunderline#/u\n"))

hechoLink

hechoLink([windowName], text, command, hint, true): Echos a piece of text as a clickable link, at the end of the current selected line - similar to hecho(). This version allows you to use colours within your link text.

hechoPopup

hechoPopup([windowName], text, {commands}, {hints}, [useCurrentFormatElseDefault]): Creates text with a left-clickable link, and a right-click menu for more options at the end of the current line, like hecho(). The added text, upon being left-clicked, will do the first command in the list. Upon being right-clicked, it'll display a menu with all possible commands. The menu will be populated with hints, one for each line.

Available in Mudlet4.1+

Parameters

windowName:

(optional) name of the window to echo to. Use either main or omit for the main window, or the miniconsoles name otherwise.

text:

the text to display

{commands}:

a table of lua code to do, in text strings or as functions (since Mudlet 4.11), i.e. {[[send("hello")]], function() echo("hi!") end}

{hints}:

a table of strings which will be shown on the popup and right-click menu. ie, {"send the hi command", "echo hi to yourself"}

useCurrentFormatElseDefault:

(optional) a boolean value for using either the current formatting options (colour, underline, italic) or the link default (blue underline).

Example

-- Create some text as a clickable with a popup menu:
hechoPopup("#ff0000activities#r to do", {function() send "sleep" end, function() send "sit" end, function() send "stand" end}, {"sleep", "sit", "stand"}, true)

-- alternatively, put command as text (in [[ and ]] to use quotation marks inside)
hechoPopup("#ff0000activities#r to do", {[[send "sleep"]], [[send "sit"]], [[send "stand"]]}, {"sleep", "sit", "stand"}, true)

hideGauge

hideGauge(gaugeName): hides the given gauge.

hinsertLink

hinsertLink([windowName], text, command, hint, true): Echos a piece of text as a clickable link, at the end of the current cursor position - similar to hinsertText(). This version allows you to use colours within your link text.

hinsertPopup

hinsertPopup([windowName], text, {commands}, {hints}, [useCurrentFormatElseDefault]): Creates text with a left-clickable link, and a right-click menu for more options at the end of the current cursor position, like hinsertText(). The added text, upon being left-clicked, will do the first command in the list. Upon being right-clicked, it'll display a menu with all possible commands. The menu will be populated with hints, one for each line.

Available in Mudlet4.1+

Parameters

windowName:

(optional) name of the window to echo to. Use either main or omit for the main window, or the miniconsoles name otherwise.

text:

the text to display

{commands}:

a table of lua code strings to do or a functions (since Mudlet 4.11). ie, {[[send("hello")]], function() echo("hi!") end}

{hints}:

a table of lua code to do, in text strings or as functions (since Mudlet 4.11), i.e. {"send the hi command", "echo hi to yourself"}

useCurrentFormatElseDefault:

(optional) a boolean value for using either the current formatting options (colour, underline, italic) or the link default (blue underline).

Example

-- Create some text as a clickable with a popup menu:
hinsertPopup("#ff0000activities#r to do", {function() send "sleep" end, function() send "sit" end, function() send "stand" end}, {"sleep", "sit", "stand"}, true)

-- alternatively, put command as text (in [[ and ]] to use quotation marks inside)
hinsertPopup("#ff0000activities#r to do", {[[send "sleep"]], [[send "sit"]], [[send "stand"]]}, {"sleep", "sit", "stand"}, true)

hreplaceLine

hreplaceLine ([window], text): Replaces the output line from the game with a colour-tagged string.

Available in Mudlet4.12+

hreplace

hreplace([window, ]text): Replaces the output line from the game with a colour-tagged string.

hideToolBar

hideToolBar(name): Hides the toolbar with the given name name and makes it disappear. If all toolbars of a tool bar area (top, left, right) are hidden, the entire tool bar area disappears automatically.

Parameters

name:

name of the button group to hide

Example

hideToolBar("my offensive buttons")

hideWindow

hideWindow(name): This function hides a mini console, a user window or a label with the given name. To show it again, use showWindow().

Parameters

name

specifies the label or console you want to hide.

Example

function miniconsoleTest()
  local windowWidth, windowHeight = getMainWindowSize()

  -- create the miniconsole
  createMiniConsole("sys", windowWidth-650,0,650,300)
  setBackgroundColor("sys",255,69,0,255)
  setMiniConsoleFontSize("sys", 8)
  -- wrap lines in window "sys" at 40 characters per line - somewhere halfway, as an example
  setWindowWrap("sys", 40)

  print("created red window top-right")

  tempTimer(1, function()
    hideWindow("sys")
    print("hid red window top-right")
  end)

  tempTimer(3, function()
    showWindow("sys")
    print("showed red window top-right")
  end)
end

miniconsoleTest()

insertLink

insertLink([windowName], text, command, hint, [useCurrentLinkFormat]): Inserts a piece of text as a clickable link at the current cursor position - similar to insertText().

Parameters

windowName:

(optional) the window to insert the link in - use either "main" or omit for the main window.

text:

text to display in the window. Same as a normal echo().

command:

Lua code to do when the link is clicked, as text or a function (since Mudlet 4.11).

hint:

text for the tooltip to be displayed when the mouse is over the link.

useCurrentLinkFormat:

(optional) true or false. If true, then the link will use the current selection style (colors, underline, etc). If missing or false, it will use the default link style - blue on black underlined text.

Example

-- link with the default blue on white colors
insertLink("hey, click me!", function() echo("you clicked me!\n") end, "Click me popup")

-- alternatively, put command as text (in [[ and ]] to use quotation marks inside)
insertLink("hey, click me!", [[echo("you clicked me!\n")]], "Click me popup")

-- use current cursor colors by adding true at the end
fg("red")
insertLink("hey, click me!", function() echo("you clicked me!\n") end, "Click me popup", true)
resetFormat()

Note: The hint can contain the same sort of "rich-text" as can be used for "labels" - and if the command is set to be the empty string "" then this can be a means to show extra information for the text when the mouse is hovered over it but without a command being run should it be clicked upon, e.g.:

Screenshot showing example of fancy visual link

insertPopup

insertPopup([windowName,] text, {commands}, {hints}[, useCurrentLinkFormat]): Creates text with a left-clickable link, and a right-click menu for more options exactly where the cursor position is, similar to insertText(). The inserted text, upon being left-clicked, will do the first command in the list. Upon being right-clicked, it'll display a menu with all possible commands. The menu will be populated with hints, one for each line.

Parameters

windowName:

(optional) name of the window to echo to - use either main or omit for the main window, or the miniconsoles name otherwise.

text:

the text inserted for the popup to be applied to.

{commands}:

a table of lua code commands to do, in text strings or as functions (since Mudlet 4.11), i.e. {[[send("hello")]], function() echo("hi!") end}.

{hints}:

a table of strings which will be shown when the pointer hovers over the popup's text and on the right-click menu. ie, {"send the hi command", "echo hi to yourself"}.

useCurrentLinkFormat:

(optional) boolean value for using either the current formatting options (colour, underline, italic) or the link default (blue underline).

Example

-- Create some text as a clickable with a popup menu:
insertPopup("activities to do", {function() send "sleep" end, function() send "sit" end, function() send "stand" end}, {"sleep", "sit", "stand"})

-- alternatively, put command as text (in [[ and ]] to use quotation marks inside)
insertPopup("activities to do", {[[send "sleep"]], [[send "sit"]], [[send "stand"]]}, {"sleep", "sit", "stand"})

insertText

insertText([windowName], text): Inserts text at cursor postion in window - unlike echo(), which inserts the text at the end of the last line in the buffer (typically the one being processed by the triggers). You can use moveCursor() to move the cursor into position first.

insertHTML() also does the same thing as insertText, if you ever come across it.

ioprint

ioprint(text, some more text, ...): Prints text to the to the stdout. This is only available if you launched Mudlet from cmd.exe on Windows, from the terminal on Mac, or from the terminal on a Linux OS (launch the terminal program, type mudlet and press enter).

Similar to echo(), but does not require a "\n" at the end for a newline and can print several items given to it. It cannot print whole tables. This function works similarly to the print() you will see in guides for Lua.

This function is useful in working out potential crashing problems with Mudlet due to your scripts - as you will still see whatever it printed when Mudlet crashes.

Parameters

text:

The information you want to display.
Example

ioprint("hi!")
ioprint(1,2,3)
ioprint(myvariable, someothervariable, yetanothervariable)

isAnsiBgColor

isAnsiBgColor(bgColorCode): This function tests if the first character of the current selection in the main console has the background color specified by bgColorCode.

Parameters

bgColorCode:

A color code to test for, possible codes are:

0 = default text color
1 = light black
2 = dark black
3 = light red
4 = dark red
5 = light green
6 = dark green
7 = light yellow
8 = dark yellow
9 = light blue
10 = dark blue
11 = light magenta
12 = dark magenta
13 = light cyan
14 = dark cyan
15 = light white
16 = dark white

Example

selectString( matches[1], 1 )
if isAnsiBgColor( 5 ) then
    bg( "red" );
    resetFormat();
    echo( "yes, the background of the text is light green" )
else
    echo( "no sorry, some other background color" )
end

Note: The variable named matches[1] holds the matched trigger pattern - even in substring, exact match, begin of line substring trigger patterns or even color triggers that do not know about the concept of capture groups. Consequently, you can always test if the text that has fired the trigger has a certain color and react accordingly. This function is faster than using getBgColor() and then handling the color comparison in Lua.

Also note that the color code numbers are Mudlet specific, though they do represent the colors in the 16 ANSI color-set for the main console they are not in the same order and they additionally have the default background color in the zeroth position.

isAnsiFgColor

isAnsiFgColor(fgColorCode): This function tests if the first character of the current selection in the main console has the foreground color specified by fgColorCode.

Parameters

fgColorCode:

A color code to test for, possible codes are:

0 = default text color
1 = light black
2 = dark black
3 = light red
4 = dark red
5 = light green
6 = dark green
7 = light yellow
8 = dark yellow
9 = light blue
10 = dark blue
11 = light magenta
12 = dark magenta
13 = light cyan
14 = dark cyan
15 = light white
16 = dark white

Example

selectString( matches[1], 1 )
if isAnsiFgColor( 5 ) then
    bg( "red" );
    resetFormat();
    echo( "yes, the text is light green" )
else
    echo( "no sorry, some other foreground color" )
end

Note: The variable named matches[1] holds the matched trigger pattern - even in substring, exact match, begin of line substring trigger patterns or even color triggers that do not know about the concept of capture groups. Consequently, you can always test if the text that has fired the trigger has a certain color and react accordingly. This function is faster than using getFgColor() and then handling the color comparison in Lua.

Also note that the color code numbers are Mudlet specific, though they do represent the colors in the 16 ANSI color-set for the main console they are not in the same order and they additionally have the default foreground color in the zeroth position.

loadWindowLayout

loadWindowLayout(): Resets the layout of userwindows (floating miniconsoles) to the last saved state.

Available in Mudlet3.2+

Example

loadWindowLayout()

lowerWindow

lowerWindow(labelName): Moves the referenced label/console below all other labels/consoles. For the opposite effect, see: raiseWindow().

Parameters

labelName:

the name of the label/console you wish to move below the rest.

Available in Mudlet3.1+

Example

createLabel("blueLabel", 300, 300, 100, 100, 1)   --creates a blue label
setBackgroundColor("blueLabel", 50, 50, 250, 255)

createLabel("redLabel", 350, 350, 100, 100, 1)    --creates a red label which is placed on TOP of the blue label, as the last made label will sit at the top of the rest
setBackgroundColor("redLabel", 250, 50, 50, 255)

lowerWindow("redLabel")                          --lowers redLabel, causing blueLabel to be back on top

moveCursor

moveCursor([windowName], x, y): Moves the user cursor of the window windowName, or the main window, to the absolute point (x,y). This function returns false if such a move is impossible e.g. the coordinates don’t exist. To determine the correct coordinates use getLineNumber(), getColumnNumber() and getLastLineNumber(). The trigger engine will always place the user cursor at the beginning of the current line before the script is run. If you omit the windowName argument, the main screen will be used.

Returns true or false depending on if the cursor was moved to a valid position. Check this before doing further cursor operations - because things like deleteLine() might invalidate this.

Parameters

windowName:

(optional) The window you are going to move the cursor in.

x:

The horizontal axis in the window - that is, the letter position within the line.

y:

The vertical axis in the window - that is, the line number.

Example

-- move cursor to the start of the previous line and insert -<(
-- the first 0 means we want the cursor right at the start of the line,
-- and getLineNumber()-1 means we want the cursor on the current line# - 1 which
-- equals to the previous line
moveCursor(0, getLineNumber()-1)
insertText("-<(")

-- now we move the cursor at the end of the previous line. Because the
-- cursor is on the previous line already, we can use #getCurrentLine()
-- to see how long it is. We also just do getLineNumber() because getLineNumber()
-- returns the current line # the cursor is on
moveCursor(#getCurrentLine(), getLineNumber())
insertText(")>-")

-- finally, reset it to the end where it was after our shenaningans - other scripts
-- could expect the cursor to be at the end
moveCursorEnd()

-- a more complicated example showing how to work with Mudlet functions

-- set up the small system message window in the top right corner
-- determine the size of your screen
local WindowWidth, WindowHeight = getMainWindowSize()

-- define a mini console named "sys" and set its background color
createMiniConsole("sys",WindowWidth-650,0,650,300)
setBackgroundColor("sys",85,55,0,255)

-- you *must* set the font size, otherwise mini windows will not work properly
setMiniConsoleFontSize("sys", 12)
-- wrap lines in window "sys" at 65 characters per line
setWindowWrap("sys", 60)
-- set default font colors and font style for window "sys"
setTextFormat("sys",0,35,255,50,50,50,0,0,0)
-- clear the window
clearUserWindow("sys")

moveCursorEnd("sys")
setFgColor("sys", 10,10,0)
setBgColor("sys", 0,0,255)
echo("sys", "test1---line1\n<this line is to be deleted>\n<this line is to be deleted also>\n")
echo("sys", "test1---line2\n")
echo("sys", "test1---line3\n")
setTextFormat("sys",158,0,255,255,0,255,0,0,0);
--setFgColor("sys",255,0,0);
echo("sys", "test1---line4\n")
echo("sys", "test1---line5\n")
moveCursor("sys", 1,1)

-- deleting lines 2+3
deleteLine("sys")
deleteLine("sys")

-- inserting a line at pos 5,2
moveCursor("sys", 5,2)
setFgColor("sys", 100,100,0)
setBgColor("sys", 255,100,0)
insertText("sys","############## line inserted at pos 5/2 ##############")

-- inserting a line at pos 0,0
moveCursor("sys", 0,0)
selectCurrentLine("sys")
setFgColor("sys", 255,155,255)
setBold( "sys", true );
setUnderline( "sys", true )
setItalics( "sys", true )
insertText("sys", "------- line inserted at: 0/0 -----\n")

setBold( "sys", true )
setUnderline( "sys", false )
setItalics( "sys", false )
setFgColor("sys", 255,100,0)
setBgColor("sys", 155,155,0)
echo("sys", "*** This is the end. ***\n")

moveCursorDown

moveCursorDown([windowName,] [lines,] [keepHorizontal]): Moves the cursor in the given window down a specified number of lines.; See also: moveCursor(), moveCursorUp(), moveCursorEnd()

Parameters

windowName:

(optional) name of the miniconsole/userwindow, or "main" for the main window.

lines:

(optional) number of lines to move cursor down by, or 1 by default.

keepHorizontal:

(optional) true/false to specify if horizontal position should be retained, or reset to the start of the line otherwise.

Available in Mudlet3.17+

Example

Need example

moveCursorUp

moveCursorUp([windowName,] [lines,] [keepHorizontal]): Moves the cursor in the given window up a specified number of lines.; See also: moveCursor(), moveCursorDown(), moveCursorEnd()

Parameters

windowName:

(optional) name of the miniconsole/userwindow, or "main" for the main window.

lines:

(optional) number of lines to move cursor up by, or 1 by default.

keepHorizontal:

(optional) true/false to specify if horizontal position should be retained, or reset to the start of the line otherwise.

Available in Mudlet3.17+

Example

Need example

moveCursorEnd

moveCursorEnd([windowName]): Moves the cursor to the end of the buffer. "main" is the name of the main window, otherwise use the name of your user window.; See Also: moveCursor()

Returns true or false

Parameters

windowName:

(optional) name of the miniconsole/userwindow, or "main" for the main window.

Example

Need example

moveGauge

moveGauge(gaugeName, newX, newY): Moves a gauge created with createGauge to the new x,y coordinates. Remember the coordinates are relative to the top-left corner of the output window.

Parameters

gaugeName:

The name of your gauge

newX:

The horizontal pixel location

newY:

The vertical pixel location

Example

-- This would move the health bar gauge to the location 1200, 400
moveGauge("healthBar", 1200, 400)

moveWindow

moveWindow(name, x, y): This function moves window name to the given x/y coordinate. The main screen cannot be moved. Instead you’ll have to set appropriate border values → preferences to move the main screen e.g. to make room for chat or information mini consoles, or other GUI elements. In the future moveWindow() will set the border values automatically if the name parameter is omitted.

Parameters

name:

The name of your window

newX:

The horizontal pixel location

newY:

The vertical pixel location

Note: Since Mudlet 3.7 this method can also be used on UserWindow consoles.

openUserWindow

openUserWindow(windowName, [restoreLayout], [autoDock], [dockingArea]): Opens a user dockable console window for user output e.g. statistics, chat etc. If a window of such a name already exists, nothing happens. You can move these windows (even to a different screen on a system with a multi-screen display), dock them on any of the four sides of the main application window, make them into notebook tabs or float them.

Parameters

windowName:

name of your window, it must be unique across ALL profiles if more than one is open (for multi-playing).

restoreLayout: (available in Mudlet 3.2+)

(optional) - only relevant, if false is provided. Then the window won't be restored to its last known position.

autoDock: (available in Mudlet 4.7+)

(optional) - only relevant, if false is provided. Then the window won't dock automatically at the corners.

dockingArea: (available in Mudlet 4.7+)

(optional) - the area your UserWindow will be docked at. possible docking areas your UserWindow will be created in (f" floating "t" top "b" bottom "r" right and "l" left). Docking area is "right" if not given any value.

Note: Since Mudlet version 3.2, Mudlet will automatically remember the window's last position.

Examples

openUserWindow("My floating window")
cecho("My floating window", "<red>hello <blue>bob!")

-- if you don't want Mudlet to remember its last position:
openUserWindow("My floating window", false)

paste

paste(windowName): Pastes the previously copied text including all format codes like color, font etc. at the current user cursor position. The copy() and paste() functions can be used to copy formated text from the main window to a user window without losing colors e. g. for chat windows, map windows etc.

Parameters

windowName:

The name of your window

pauseMovie

pauseMovie(label name)

Pauses the gif animation on the label

Returns true

Available in Mudlet4.15+

Parameters

label name:

name of the gif label

Example

-- create a label with the name myMovie
createLabel("myMovie",0,0,200,200,0)

-- puts the gif on the label and animates it
setMovie("myMovie", getMudletHomeDir().."/movie.gif")
--stops the animation
pauseMovie("myMovie")

prefix

prefix(text, [writingFunction], [foregroundColor], [backgroundColor], [windowName]): Prefixes text at the beginning of the current line when used in a trigger.

Parameters

text:

the information you want to prefix

"writingFunction:"

optional parameter, allows the selection of different functions to be used to write the text, valid options are: echo, cecho, decho, and hecho.

"foregroundColor:"

optional parameter, allows a foreground color to be specified if using the echo function using a color name, as with the fg() function

"backgroundColor:"

optional parameter, allows a background color to be specified if using the echo function using a color name, as with the bg() function

"windowName:"

optional parameter, allows the selection a miniconsole or the main window for the line that will be prefixed
Example

-- Prefix the hours, minutes and seconds onto our prompt even though Mudlet has a button for that
prefix(os.date("%H:%M:%S "))
-- Prefix the time in red into a miniconsole named "my_console"
prefix(os.date("<red>%H:%M:%S<reset>", cecho, nil, nil, "my_console"))

print

print(text, some more text, ...): Prints text to the main window. Similar to echo(), but does not require a "\n" at the end for a newline and can print several items given to it. It cannot print whole tables - use display() for those. This function works similarly to the print() you will see in guides for Lua.

Parameters

text:

The information you want to display.
Example

print("hi!")
print(1,2,3)
print(myvariable, someothervariable, yetanothervariable)

raiseWindow

raiseWindow(labelName): Raises the referenced label/console above all over labels/consoles. For the opposite effect, see: lowerWindow().

Parameters

labelName:

the name of the label/console you wish to bring to the top of the rest.

Available in Mudlet3.1+

Example

createLabel("blueLabel", 300, 300, 100, 100, 1)   --creates a blue label
setBackgroundColor("blueLabel", 50, 50, 250, 255)

createLabel("redLabel", 350, 350, 100, 100, 1)    --creates a red label which is placed on TOP of the bluewindow, as the last made label will sit at the top of the rest
setBackgroundColor("redLabel", 250, 50, 50, 255)

raiseWindow("blueLabel")                          --raises blueLabel back at the top, above redLabel

removeCommandLineMenuEvent

removeCommandLineMenuEvent([window,] label)

Removes an existing command line menu event.

Parameters

window:

Window that item is associated with. Optional, defaults to "main" (main window console).

label:

Label under which element is registered

Returns

Returns True If the mouse event was removed successfully.

removeMouseEvent

removeMouseEvent(uniqueName)

Removes an existing mouse event. Returns True If the event exists and was removed successfully, throws a warning if the event doesn't exist.

Available in Mudlet4.13+

See also: getMouseEvents(), addMouseEvent()

Parameters

uniqueName:

A unique identifier that the mouse event was registered under.

Returns

Returns True If the mouse event was removed successfully.

replace

replace([windowName], with, [keepcolor]): Replaces the currently selected text with the new text. To select text, use selectString(), selectSection() or a similar function.

Note: If you’d like to delete/gag the whole line, use deleteLine() instead.

Note: when used outside of a trigger context (for example, in a timer instead of a trigger), replace() won't trigger the screen to refresh. Instead, use replace("") and insertText("new text") as insertText() does.

replaceAll

replaceAll(what, with, [keepcolor]): Replaces all occurrences of what in the current line with with.

Parameters

what:

the text to replace

Note: This accepts Lua patterns

with:

the new text to have in place

keepcolor:

setting this to true will keep the existing colors.

Note: keepcolor is available in Mudlet 4.10+

Examples

-- replace all occurrences of the word "south" in the line with "north"
replaceAll("south", "north")

-- replace all occurrences of the text that the variable "target" has
replaceAll(target, "The Bad Guy")

replaceLine

replaceLine ([window], text): Replaces the output line from the game with your own text.

replaceWildcard

replaceWildcard(which, replacement, [keepcolor]): Replaces the given wildcard (as a number) with the given text. Equivalent to doing:

selectString(matches[2], 1)
replace("text")

Parameters

which:

Wildcard to replace.

replacement:

Text to replace the wildcard with.

keepcolor:

setting this to true will keep the existing colors

Note: keepcolor available in Mudlet 4.10+

Example

replaceWildcard(2, "hello") -- on a perl regex trigger of ^You wave (goodbye)\.$, it will make it seem like you waved hello

resetCmdLineAction

resetCmdLineAction(commandLineName): Resets the action on the command line so the it behaves like the main command line again.
Parameters

commandLineName

The name of the command line the action will be resetet.

resetBackgroundImage

resetBackgroundImage([windowName]): Resets the console background-image
Parameters

windowName

(optional) name of the console the image will be reset

resetFormat

resetFormat([windowName]): Resets the colour/bold/italics formatting. Always use this function when done adjusting formatting, so make sure what you've set doesn't 'bleed' onto other triggers/aliases.

Parameters

windowName

(optional) name of the console to reset formatting. Defaults to "main" if missing.

Example

-- select and set the 'Tommy' to red in the line
if selectString("Tommy", 1) ~= -1 then fg("red") end

-- now reset the formatting, so our echo isn't red
resetFormat()
echo(" Hi Tommy!")

-- another example: just highlighting some words
for _, word in ipairs{"he", "she", "her", "their"} do
  if selectString(word, 1) ~= -1 then
    bg("blue")
  end
end
resetFormat()

resetLabelCursor

resetLabelCursor(labelName): Resets your mouse cursor to the default one.

Available in Mudlet4.8+

Parameters

labelName: label for which to reset the cursor for.

Example

resetLabelCursor("myLabel")
-- This will reset the mouse cursor over myLabel to the default one

resetLabelToolTip

resetLabelToolTip(labelName): Resets the tooltip on the given label.

Available in Mudlet4.6.1+

Parameters

labelName:

The name of the label the tooltip will be reseted.

resetMapWindowTitle

resetMapWindowTitle(): resets the title of the popped out map window to default.

Available in Mudlet4.8+

resetUserWindowTitle

resetUserWindowTitle(windowName): resets the title of the UserWindow windowName

Parameters

windowName:

Name of the userwindow for which the title will be resetet

Available in Mudlet4.8+

resizeWindow

resizeWindow(windowName, width, height): Resizes a mini console, label, or floating User Windows.; See also: createMiniConsole(), createLabel(), handleWindowResizeEvent(), resizeWindow(), setBorderSizes(), openUserWindow()

Parameters

windowName:

The name of your window

width:

The new width you want

height:

The new height you want

Note: Since Mudlet 3.7 this method can also be used on User Window consoles if they are floating.

saveWindowLayout

saveWindowLayout(): Saves the layout of userwindows (floating miniconsoles), in case you'd like to load them again later.

Available in Mudlet3.2+

Example

saveWindowLayout()

scaleMovie

scaleMovie(label name, [autoscale]): Resizes the gif to fill the full size of its label

selectCaptureGroup

selectCaptureGroup(groupNumber): Selects the content of the capture group number in your Perl regular expression (from matches[]). Also works with named capture group. It does not work with multimatches.

selectCmdLineText

selectCmdLineText([commandLine]): Selects the text in your command line. You can specify which one, if you got many.

selectCurrentLine

selectCurrentLine([windowName]): Selects the content of the current line that the cursor at. By default, the cursor is at the start of the current line that the triggers are processing, but you can move it with the moveCursor() function.

Note: This selects the whole line, including the linebreak - so it has a subtle difference from the slightly slower selectString(line, 1) selection method.

Parameters

windowName:

(optional) name of the window in which to select text.

Example

-- color the whole line green!
selectCurrentLine()
fg("green")
deselect()
resetFormat()

-- to select the previous line, you can do this:
moveCursor(0, getLineNumber()-1)
selectCurrentLine()

-- to select two lines back, this:
moveCursor(0, getLineNumber()-2)
selectCurrentLine()

selectSection

selectSection( [windowName], fromPosition, length ): Selects the specified parts of the line starting from the left and extending to the right for however how long. The line starts from 0.; Returns true if the selection was successful, and false if the line wasn't actually long enough or the selection couldn't be done in general.

Parameters

"windowName:"

(optional) name of the window in which to select text. By default the main window, if no windowName is given.

Will not work if "main" is given as the windowName to try to select from the main window.

fromPosition:

number to specify at which position in the line to begin selecting

length:

number to specify the amount of characters you want to select

Example

-- select and colour the first character in the line red
if selectSection(0,1) then fg("red") end

-- select and colour the second character green (start selecting from the first character, and select 1 character)
if selectSection(1,1) then fg("green") end

-- select and colour three character after the first two grey (start selecting from the 2nd character for 3 characters long)
if selectSection(2,3) then fg("grey") end

selectString

selectString([windowName], text, number_of_match): Selects a substring from the line where the user cursor is currently positioned - allowing you to edit selected text (apply colour, make it be a link, copy to other windows or other things).

Note: You can move the user cursor with moveCursor(). When a new line arrives from the game, the user cursor is positioned at the beginning of the line. However, if one of your trigger scripts moves the cursor around you need to take care of the cursor position yourself and make sure that the cursor is in the correct line if you want to call one of the select functions. To deselect text, see deselect().

setAppStyleSheet

setAppStyleSheet(stylesheet [, tag]): Sets a stylesheet for the entire Mudlet application and every open profile. Because it affects other profiles that might not be related to yours, it's better to use setProfileStyleSheet() instead of this function.

Raises the sysAppStyleSheetChange event which comes with two arguments in addition to the event name. The first is the optional tag which was passed into the function, or "" if nothing was given. The second is the profile which made the stylesheet changes.

setBackgroundColor

setBackgroundColor([windowName], r, g, b, [transparency]): Sets the background for the given label, miniconsole, or userwindow. Colors are from 0 to 255 (0 being black), and transparency is from 0 to 255 (0 being completely transparent).

Parameters

windowName:

(optional) name of the label/miniconsole/userwindow to change the background color on, or "main" for the main window.

r:

Amount of red to use, from 0 (none) to 255 (full).

g:

Amount of green to use, from 0 (none) to 255 (full).

b:

Amount of red to use, from 0 (none) to 255 (full).

transparency:

(optional) amount of transparency to use, from 0 (fully transparent) to 255 (fully opaque). Defaults to 255 if omitted.

Note: Transparency also available for main/miniconsoles in Mudlet 4.10+

Example

-- make a red label that's somewhat transparent
setBackgroundColor("some label",255,0,0,200)

setBackgroundImage

setBackgroundImage(labelName, imageLocation)
setBackgroundImage([windowname], imageLocation, [mode]): Loads an image file (png) as a background image for a label or console. This can be used to display clickable buttons in combination with setLabelClickCallback() and such.

Note: You can also load images on labels via setLabelStyleSheet().

Parameters (label)

labelName:

The name of the label to change it's background color.

imageLocation:

The full path to the image location. It's best to use [[ ]] instead of "" for it - because for Windows paths, backslashes need to be escaped.

Parameters (consoles)

windowName:

(optional) name of the miniconsole/userwindow to change the background image on, or "main" for the main window.

imageLocation:

The full path to the image location. It's best to use [[ ]] instead of "" for it - because for Windows paths, backslashes need to be escaped.

mode:

(optional) allows different modes for drawing the background image. Possible modes areː

- border - the background image is stretched (1)
- center - the background image is in the center (2),
- tile - the background image is 'tiled' (3)
- style - choose your own background image stylesheet, see example below (4)

setBgColor

setBgColor([windowName], r, g, b, [transparency]): Sets the current text background color in the main window unless windowName parameter given. If you have selected text prior to this call, the selection will be highlighted otherwise the current text background color will be changed. If you set a foreground or background color, the color will be used until you call resetFormat() on all further print commands.

If you'd like to change the background color of a window, see setBackgroundColor().

See also: cecho(), setBackgroundColor()

Parameters

windowName:

(optional) either be none or "main" for the main console, or a miniconsole / userwindow name.

r:

The red component of the gauge color. Passed as an integer number from 0 to 255

g:

The green component of the gauge color. Passed as an integer number from 0 to 255

b:

The blue component of the gauge color. Passed as an integer number from 0 to 255

transparency:

Amount of transparency to use, from 0 (fully transparent) to 255 (fully opaque). Optional, if not used color is fully opaque

Note: Transparency parameter available in Mudlet 4.10+

Example

--highlights the first occurrence of the string "Tom" in the current line with a red background color.
selectString( "Tom", 1 )
setBgColor( 255,0,0 )

--prints "Hello" on red background and "You" on blue.
setBgColor(255,0,0)
echo("Hello")
setBgColor(0,0,255)
echo(" You!")
resetFormat()

setBold

setBold(windowName, boolean): Sets the current text font to bold (true) or non-bold (false) mode. If the windowName parameters omitted, the main screen will be used. If you've got text currently selected in the Mudlet buffer, then the selection will be bolded. Any text you add after with echo() or insertText() will be bolded until you use resetFormat().

windowName:

Optional parameter set the current text background color in windowname given.

boolean:

A true or false that enables or disables bolding of text

Example

-- enable bold formatting
setBold(true)
-- the following echo will be bolded
echo("hi")
-- turns off bolding, italics, underlines and colouring. It's good practice to clean up after you're done with the formatting, so other your formatting doesn't "bleed" into other echoes.
resetFormat()

setBorderBottom

setBorderBottom(size): Sets the size of the bottom border of the main window in pixels. A border means that the game text won't go on it, so this gives you room to place your graphical elements there.; See Also: setBorderSizes(), setBorderColor(), getBorderBottom()

Parameters

size:

Height of the border in pixels - with 0 indicating no border.

Example

setBorderBottom(150)

setBorderColor

setBorderColor(red, green, blue): Sets the color of the main windows border that you can create either with lua commands, or via the main window settings.; See Also: setBorderSizes()

Parameters

red:

Amount of red color to use, from 0 to 255.

green:

Amount of green color to use, from 0 to 255.

blue:

Amount of blue color to use, from 0 to 255.

Example

-- set the border to be completely blue
setBorderColor(0, 0, 255)

-- or red, using a name
setBorderColor( unpack(color_table.red) )

setBorderLeft

setBorderLeft(size): Sets the size of the left border of the main window in pixels. A border means that the game text won't go on it, so this gives you room to place your graphical elements there.; See Also: setBorderSizes(), setBorderColor(), getBorderLeft()

Parameters

size:

Width of the border in pixels - with 0 indicating no border.

Example

setBorderLeft(5)

setBorderRight

setBorderRight(size): Sets the size of the right border of the main window in pixels. A border means that the game text won't go on it, so this gives you room to place your graphical elements there.; See Also: setBorderSizes(), setBorderColor(), getBorderRight()

Parameters

size:

Width of the border in pixels - with 0 indicating no border.

Example

setBorderRight(50)

setBorderSizes

setBorderSizes(top, right, bottom, left): Sets the size of all borders of the main window in pixels. A border means that the game text won't go on it, so this gives you room to place your graphical elements there.; The exact result of this function depends on how many numbers you give to it as arguments.; See also: getBorderSizes(), setBorderTop(), setBorderRight(), setBorderBottom(), setBorderLeft(), setBorderColor()

Available in Mudlet4.0+

Arguments

setBorderSizes(top, right, bottom, left)

4 arguments: All borders will be set to their new given size.

setBorderSizes(top, width, bottom)

3 arguments: Top and bottom borders will be set to their new given size, and right and left will gain the same width.

setBorderSizes(height, width)

2 arguments: Top and bottom borders will gain the same height, and right and left borders gain the same width.

setBorderSizes(size)

1 argument: All borders will be set to the same size.

setBorderSizes()

0 arguments: All borders will be hidden or set to size of 0 = no border.

Example

setBorderSizes(100, 50, 150, 0) 
-- big border at the top, bigger at the bottom, small at the right, none at the left

setBorderSizes(100, 50, 150) 
-- big border at the top, bigger at the bottom, small at the right and the left

setBorderSizes(100, 50) 
-- big border at the top and the bottom, small at the right and the left

setBorderSizes(100) 
-- big borders at all four sides

setBorderSizes() 
-- no borders at all four sides

setBorderTop

setBorderTop(size): Sets the size of the top border of the main window in pixels. A border means that the game text won't go on it, so this gives you room to place your graphical elements there.; See Also: setBorderSizes(), setBorderColor(), getBorderTop()

Parameters

size:

Height of the border in pixels - with 0 indicating no border.

Example

setBorderTop(100)

setFgColor

setFgColor([windowName], red, green, blue): Sets the current text foreground color in the main window unless windowName parameter given.

windowName:

(optional) either be none or "main" for the main console, or a miniconsole / userwindow name.

red:

The red component of the gauge color. Passed as an integer number from 0 to 255

green:

The green component of the gauge color. Passed as an integer number from 0 to 255

blue:

The blue component of the gauge color. Passed as an integer number from 0 to 255

Example

--highlights the first occurrence of the string "Tom" in the current line with a red foreground color.
selectString( "Tom", 1 )
setFgColor( 255, 0, 0 )

setButtonStyleSheet

setButtonStyleSheet(button, markup): Applies Qt style formatting to a button via a special markup language.

Parameters

button:

The name of the button to be formatted.

markup:

The string instructions, as specified by the Qt Style Sheet reference.

Note: You can instead use QWidget { markup }. QWidget will reference 'button', allowing the use of pseudostates like QWidget:hover and QWidget:selected

References: https://doc.qt.io/qt-5/stylesheet-reference.html

Example

setButtonStyleSheet("my test button", [[
  QWidget {
    background-color: #999999;
    border: 3px #777777;
  }
  QWidget:hover {
    background-color: #bbbbbb;
  }
  QWidget:checked {
    background-color: #77bb77;
    border: 3px #559955;
  }
  QWidget:hover:checked {
    background-color: #99dd99;
  } ]])

setClipboardText

setClipboardText(textContent): Sets the value of the computer's clipboard to the string data provided.; See also: getClipboardText()

Parameters

textContent:

The text to be put into the clipboard.

Note: Note: Available in Mudlet 4.10+

Example

setClipboardText("New Clipboard Contents")
echo("Clipboard: " .. getClipboardText()) -- should echo "Clipboard: New Clipboard Contents"

setCmdLineAction

setCmdLineAction(commandLineName, luaFunctionName, [any arguments]): Specifies a Lua function to be called if the user sends text to the command line. This function can pass any number of string or integer number values as additional parameters. These parameters are then used in the callback - thus you can associate data with the command line action. Additionally, this function passes the command line input text as the final argument.

Note: If no action is set the command line behaves like the main command line and sends commands directly to the game or alias engine.

The function specified in luaFunctionName is called like so:

luaFuncName(optional number of arguments, text)

setCmdLineStyleSheet

setCmdLineStyleSheet([commandLineName], markup): Applies Qt style formatting to a command line via a special markup language.

Parameters

commandLineName:

(optional) Name of the command line (or miniconsole the command line is in). If not given the stylesheet will be applied to the main command line.

markup

The string instructions, as specified by the Qt Style Sheet reference.

Note: Moving the command line over can adjust the other elements on the same horizontal axis, such as the search feature, buttons and network latency monitor. These additional components can take up to 30% of the screen size (400px when getMainWindowSize() was returning 1216px width). Don't go too aggressive with the numbers at first otherwise it will push elements off screen. Moving the command line over 250px on the above monitor also needed modifying of the width and max-width CSS properties. setCmdLineStyleSheet("main", [[QPlainTextEdit {margin-left: 250px; max-width: 562px; width: 562px}]])

Available in Mudlet4.10+

Examples

-- move the main command line over to the right
setCmdLineStyleSheet("main", [[
  QPlainTextEdit {
    margin-left: 100px; /* change 100 to your number */
    background-color: black; /* change it to your background color */
  }
]])

--only change font-size of your main command line
setCmdLineStyleSheet("main", [[
  QPlainTextEdit {
    font-sizeː20pt; 
  }
]])

--change bg/fg color of your miniconsole command line (name of the miniconsole is 'myMiniconsole'
--the command line in the miniconsole has to be enabled
setCmdLineStyleSheet("myMiniConsole", [[
  QPlainTextEdit {
    background: rgb(0,100,0);
    color: rgb(0,200,255);
    font-size: 10pt;
  }
]])

setFont

setFont(name, font): Sets the font on the given window or console name. Can be used to change font of the main console, miniconsoles, and userwindows. Prefer a monospaced font - those work best with text games. See here for more.; See also: getFont(), setFontSize(), getFontSize(), openUserWindow(), getAvailableFonts()

Parameters

name:

Optional - the window name to set font size of - can either be none or "main" for the main console, or a miniconsole / userwindow name.

font:

The font to use.

Available in Mudlet3.9+

Example

-- The following will set the "main" console window font to Ubuntu Mono, another font included in Mudlet.
setFont("Ubuntu Mono")
setFont("main", "Ubuntu Mono")

-- This will set the font size of a miniconsole named "combat" to Ubuntu Mono.
setFont("combat", "Ubuntu Mono")

setFontSize

setFontSize(name, size): Sets a font size on the given window or console name. Can be used to change font size of the Main console as well as dockable UserWindows.; See Also: getFontSize(), openUserWindow()

Parameters

name:

Optional - the window name to set font size of - can either be none or "main" for the main console, or a UserWindow name.

size:

The font size to apply to the window.

Available in Mudlet3.4+

Example

-- The following will set the "main" console window font to 12-point font.
setFontSize(12)
setFontSize("main", 12)

-- This will set the font size of a user window named "uw1" to 12-point font.
setFontSize("uw1", 12)

setGauge

setGauge(gaugeName, currentValue, maxValue, gaugeText): Use this function when you want to change the gauges look according to your values. Typical usage would be in a prompt with your current health or whatever value, and throw in some variables instead of the numbers.

Example

-- create a gauge
createGauge("healthBar", 300, 20, 30, 300, nil, "green")

--Change the looks of the gauge named healthBar and make it
--fill to half of its capacity. The height is always remembered.
setGauge("healthBar", 200, 400)

--If you wish to change the text on your gauge, you’d do the following:
setGauge("healthBar", 200, 400, "some text")

setGaugeStyleSheet

setGaugeStyleSheet(gaugeName, css, cssback, csstext): Sets the CSS stylesheets on a gauge - one on the front (the part that resizes accoding to the values on the gauge) and one in the back. You can use Qt Designer to create stylesheets.

Example

setGaugeStyleSheet("hp_bar", [[background-color: QLinearGradient( x1: 0, y1: 0, x2: 0, y2: 1, stop: 0 #f04141, stop: 0.1 #ef2929, stop: 0.49 #cc0000, stop: 0.5 #a40000, stop: 1 #cc0000);
border-top: 1px black solid;
border-left: 1px black solid;
border-bottom: 1px black solid;
border-radius: 7;
padding: 3px;]],
[[background-color: QLinearGradient( x1: 0, y1: 0, x2: 0, y2: 1, stop: 0 #bd3333, stop: 0.1 #bd2020, stop: 0.49 #990000, stop: 0.5 #700000, stop: 1 #990000);
border-width: 1px;
border-color: black;
border-style: solid;
border-radius: 7;
padding: 3px;]])

setGaugeText

setGaugeText(gaugename, css, ccstext ): Set the formatting of the text used inside the inserted gaugename.

Example

setGaugeText("healthBar", [[<p style="font-weight:bold;color:#C9C9C9;letter-spacing:1pt;word-spacing:2pt;font-size:12px;text-align:center;font-family:arial black, sans-serif;">]]..MY_NUMERIC_VARIABLE_HERE..[[</p>]])

Useful resources: http://csstxt.com - Generate the text exactly how you like it before pasting it into the css slot.; https://www.w3schools.com/colors/colors_picker.asp - Can help you choose colors for your text!

setHexBgColor

setHexBgColor([windowName], hexColorString): Sets the current text background color in the main window unless windowName parameter given. This function allows to specify the color as a 6 character hexadecimal string.

windowName:

Optional parameter set the current text background color in windowname given.

hexColorString

6 character long hexadecimal string to set the color to. The first two characters 00-FF represent the red part of the color, the next two the green and the last two characters stand for the blue part of the color

setHexFgColor

setHexFgColor([windowName], hexColorString): Sets the current text foreground color in the main window unless windowName parameter given. This function allows to specify the color as a 6 character hexadecimal string.

windowName:

Optional parameter set the current text foreground color in windowname given.

hexColorString

6 character long hexadecimal string to set the color to. The first two characters 00-FF represent the red part of the color, the next two the green and the last two characters stand for the blue part of the color

setItalics

setItalics(windowName, bool): Sets the current text font to italics/non-italics mode. If the windowName parameters omitted, the main screen will be used.

setLabelToolTip

setLabelToolTip(labelName, text, [duration]): Sets a tooltip on the given label.

Available in Mudlet4.6.1+

Parameters

labelName:

The name of the label to set the tooltip to.

text:

The text to be shown. Can contain Qt rich text formats.

duration:

Duration of the tooltip timeout in seconds. Optional, if not set the default duration will be set.

setLabelClickCallback

setLabelClickCallback(labelName, luaFunctionName, [any arguments]): Specifies a Lua function to be called if the user clicks on the label/image. This function can pass any number of string or integer number values as additional parameters. These parameters are then used in the callback - thus you can associate data with the label/button. Additionally, this function passes an event table as the final argument. This table contains information about the mouse button clicked, other buttons that were pressed at the time, and the mouse cursor's local (relative to the label) and global (relative to the Mudlet window) position. The function specified in luaFunctionName is called like so:

luaFuncName(optional number of arguments, event)

where event has the following structure:

event = {
  x = 100,
  y = 200,
  globalX = 300,
  globalY = 320,
  button = "LeftButton",
  buttons = {"RightButton", "MidButton"},
}

Parameters

labelName:

The name of the label to attach a callback function to.

luaFunctionName:

Lua function to call, or the function name, as a string.

any arguments:

(optional) Any amount of arguments you'd like to pass to the calling function.

Note: Event argument is available in 3.6+, and in 4.8+ you can pass a function directly instead of a string.

Note: While event.button may contain a single string of any listed below, event.buttons will only ever contain some combination of "LeftButton", "MidButton", and "RightButton"

The following mouse button strings are defined:

"LeftButton"        "RightButton"        "MidButton"
"BackButton"        "ForwardButton"      "TaskButton"
"ExtraButton4"      "ExtraButton5"       "ExtraButton6"
"ExtraButton7"      "ExtraButton8"       "ExtraButton9"
"ExtraButton10"     "ExtraButton11"      "ExtraButton12"
"ExtraButton13"     "ExtraButton14"      "ExtraButton15"
"ExtraButton16"     "ExtraButton17"      "ExtraButton18"
"ExtraButton19"     "ExtraButton20"      "ExtraButton21"
"ExtraButton22"     "ExtraButton23"      "ExtraButton24"

Example

createLabel("testLabel", 50, 50, 100, 100, 0)

function onClickGoNorth(event)
  if event.button == "LeftButton" then
    send("walk north")
  elseif event.button == "RightButton" then
    send("swim north")
  elseif event.button == "MidButton" then
    send("gallop north")
  end
end

setLabelClickCallback("testLabel", "onClickGoNorth")

-- you can also use them within tables:
mynamespace =
  {
    onClickGoNorth =
      function()
        echo("the north button was clicked!")
      end,
  }
setLabelClickCallback("testLabel", "mynamespace.onClickGoNorth")

-- or by passing the function directly:
setLabelClickCallback("testLabel", onClickGoNorth)

setLabelDoubleClickCallback

setLabelDoubleClickCallback(labelName, luaFunctionName, [any arguments]): Specifies a Lua function to be called if the user double clicks on the label/image. This function can pass any number of string or integer number values as additional parameters. These parameters are then used in the callback - thus you can associate data with the label/button. Additionally, this function passes an event table as the final argument, as in setLabelClickCallback()

Available in Mudlet3.6+

Parameters

labelName:

The name of the label to attach a callback function to.

luaFunctionName:

The Lua function name to call, as a string.

any arguments:

(optional) Any amount of arguments you'd like to pass to the calling function.

setLabelMoveCallback

setLabelMoveCallback(labelName, luaFunctionName, [any arguments]): Specifies a Lua function to be called when the mouse moves while inside the specified label/console. This function can pass any number of string or integer number values as additional parameters. These parameters are then used in the callback - thus you can associate data with the label/button. Additionally, this function passes an event table as the final argument, as in setLabelClickCallback()

Parameters

labelName:

The name of the label to attach a callback function to.

luaFunctionName:

The Lua function name to call, as a string.

any arguments:

(optional) Any amount of arguments you'd like to pass to the calling function.

Available in Mudlet3.6+

setLabelOnEnter

setLabelOnEnter(labelName, luaFunctionName, [any arguments]): Specifies a Lua function to be called when the mouse enters within the labels borders. This function can pass any number of string or integer number values as additional parameters. These parameters are then used in the callback - thus you can associate data with the label/button. Additionally, this function passes an event table as the final argument, similar to setLabelClickCallback(), but with slightly different information.; For this callback, the event argument has the following structure:

event = {
  x = 100,
  y = 200,
  globalX = 300,
  globalY = 320,
}

Parameters

labelName:

The name of the label to attach a callback function to.

luaFunctionName:

The Lua function name to call, as a string - it must be registered as a global function, and not inside any namespaces (tables).

any arguments:

(optional) Any amount of arguments you'd like to pass to the calling function.

Example

function onMouseOver()
  echo("The mouse is hovering over the label!\n")
end

setLabelOnEnter( "compassNorthImage", "onMouseOver" )

setLabelOnLeave

setLabelOnLeave(labelName, luaFunctionName, [any arguments]): Specifies a Lua function to be called when the mouse leaves the labels borders. This function can pass any number of string or integer number values as additional parameters. These parameters are then used in the callback - thus you can associate data with the label/button.

Parameters

labelName:

The name of the label to attach a callback function to.

luaFunctionName:

The Lua function name to call, as a string - it must be registered as a global function, and not inside any namespaces (tables).

any arguments:

(optional) Any amount of arguments you'd like to pass to the calling function.

Example

function onMouseLeft(argument)
  echo("The mouse quit hovering over the label the label! We also got this as data on the function: "..argument)
end

setLabelOnLeave( "compassNorthImage", "onMouseLeft", "argument to pass to function" )

setLabelReleaseCallback

setLabelReleaseCallback(labelName, luaFunctionName, [any arguments]): Specifies a Lua function to be called when a mouse click ends that originated on the specified label/console. This function is called even if you drag the mouse off of the label/console before releasing the click. This function can pass any number of string or integer number values as additional parameters. These parameters are then used in the callback - thus you can associate data with the label/button. Additionally, this function passes an event table as the final argument, as in setLabelClickCallback()

Available in Mudlet3.0+

Parameters

labelName:

The name of the label to attach a callback function to.

luaFunctionName:

The Lua function name to call, as a string.

any arguments:

(optional) Any amount of arguments you'd like to pass to the calling function.

Note: The event argument only available since Mudlet 3.6

Example

function onReleaseNorth()
  echo("the north button was released!")
end

setLabelReleaseCallback( "compassNorthImage", "onReleaseNorth" )

-- you can also use them within tables:
mynamespace = {
  onReleaseNorth = function()
    echo("the north button was released!")
  end
}

setLabelReleaseCallback( "compassNorthImage", "mynamespace.onReleaseNorth" )

setLabelStyleSheet

setLabelStyleSheet(label, markup): Applies Qt style formatting to a label via a special markup language.

Parameters

label:

The name of the label to be formatted (passed when calling createLabel).

markup:

The string instructions, as specified by the Qt Style Sheet reference.

Note that when specifying a file path for styling purposes, forward slashes, / , must be used, even if your OS uses backslashes, \ , normally.

References: https://doc.qt.io/qt-5/stylesheet-reference.html

Example

-- This creates a label with a white background and a green border, with the text "test"
-- inside.
createLabel("test", 50, 50, 100, 100, 0)
setLabelStyleSheet("test", [[
  background-color: white;
  border: 10px solid green;
  font-size: 12px;
  ]])
echo("test", "test")

-- This creates a label with a single image, that will tile or clip depending on the
-- size of the label. To use this example, please supply your own image.
createLabel("test5", 50, 353, 164, 55, 0)
setLabelStyleSheet("test5", [[
  background-image: url("C:/Users/Administrator/.config/mudlet/profiles/Midkemia Online/Vyzor/MkO_logo.png");
  ]])

-- This creates a label with a single image, that can be resized (such as during a
-- sysWindowResizeEvent). To use this example, please supply your own image.
createLabel("test9", 215, 353, 100, 100, 0)
setLabelStyleSheet("test9", [[
  border-image: url("C:/Users/Administrator/.config/mudlet/profiles/Midkemia Online/Vyzor/MkO_logo.png");
  ]])

--This creates a label whose background changes when the users mouse hovers over it.

--putting the styleSheet in a variable allows us to easily change the styleSheet. We also are placing colors in variables that have been preset.  
local labelBackgroundColor = "#123456"
local labelHoverColor = "#654321"
local labelFontSize = 12
local labelName = "HoverLabel"
local ourLabelStyle = [[
QLabel{
	background-color: ]]..labelBackgroundColor..[[;
	font-size: ]]..labelFontSize..[[px;
	qproperty-alignment: 'AlignCenter | AlignCenter';
}
QLabel::hover{
	background-color: ]]..labelHoverColor..[[;
	font-size: ]]..labelFontSize..[[px;
	qproperty-alignment: 'AlignCenter | AlignCenter';
}
]]

--Creating the label using the labelName and ourLabelStyle variables created above.
createLabel(labelName,0,0,400,400,1)
setLabelStyleSheet(labelName, ourLabelStyle)
echo("HoverLabel","This text shows while mouse is or is not over the label.")

--Using QLabel::hover mentioned above. Lets "trick" the label into changing it's text.
--Please keep in mind that the setLabelMoveCallback allows for much more control over not just your label but your entire project.

--putting the styleSheet in a variable allows us to easily change the styleSheet. We also are placing colors in variables that have been preset.  
local labelBackgroundColor = "#123456"
local labelHoverColor = "#654321"
local labelFontSize = 12
local labelName = "HoverLabel"
--Notice we are adding a string returned from a function. In this case, the users profile directory.
local ourLabelStyle = [[
QLabel{
	border-image: url("]]..getMudletHomeDir()..[[/imagewithtext.png");
}
QLabel::hover{
	border-image: url("]]..getMudletHomeDir()..[[/imagewithhovertext.png");
}
]]

--Creating the label using the labelName and ourLabelStyle variables created above.
createLabel(labelName,0,0,400,400,1)
setLabelStyleSheet(labelName, ourLabelStyle)
--This is just to example that echos draw on top of the label. You would not want to echo onto a label you were drawing text on with images, because echos would draw on top of them.
echo("HoverLabel","This text shows while mouse is or is not over the label.")

setLabelCursor

setLabelCursor(labelName, cursorShape): Changes how the mouse cursor looks like when over the label. To reset the cursor shape, use resetLabelCursor().

Available in Mudlet4.8+

Parameters

labelName:

Name of the label which you want the mouse cursor change at.

cursorShape

Shape of the mouse cursor. List of possible cursor shapes is available here.
Example

setLabelCursor("myLabel", "Cross")
-- This will change the mouse cursor to a cross if it's over the label myLabel

setLabelCustomCursor

setLabelCustomCursor(labelName, custom cursor, [hotX, hotY]): Changes the mouse cursor shape over your label to a custom cursor. To reset the cursor shape, use resetLabelCursor().

Available in Mudlet4.8+

Parameters

labelName:

Name of the label which you want the mouse cursor change at.

custom cursor

Location of your custom cursor file. To be compatible with all systems it is recommended to use png files with size of 32x32.

hotX

X-coordinate of the cursors hotspot position. Optional, if not set it is set to -1 which is in the middle of your custom cursor.

hotY

Y-coordinate of the cursors hotspot position. Optional, if not set it is set to -1 which is in the middle of your custom cursor.
Example

setLabelCustomCursor("myLabel", getMudletHomeDir().."/custom_cursor.png")
-- This will change the mouse cursor to your custom cursor if it's over the label myLabel

setLabelWheelCallback

setLabelWheelCallback(labelName, luaFunctionName, [any arguments]): Specifies a Lua function to be called when the mouse wheel is scrolled while inside the specified label/console. This function can pass any number of string or integer number values as additional parameters. These parameters are then used in the callback - thus you can associate data with the label/button. Additionally, this function passes an event table as the final argument, similar to setLabelClickCallback(), but with slightly different information.; For this callback, the event argument has the following structure:

event = {
  x = 100,
  y = 200,
  globalX = 300,
  globalY = 320,
  buttons = {"RightButton", "MidButton"},
  angleDeltaX = 0,
  angleDeltaY = 120
}

Keys angleDeltaX and angleDeltaY correspond with the horizontal and vertical scroll distance, respectively. For most mice, these values will be multiples of 120.

Parameters

labelName:

The name of the label to attach a callback function to.

luaFunctionName:

The Lua function name to call, as a string.

any arguments:

(optional) Any amount of arguments you'd like to pass to the calling function.

Available in Mudlet3.6+

Example

function onWheelNorth(event)
  if event.angleDeltaY > 0 then
    echo("the north button was wheeled forwards over!")
  else
    echo("the north button was wheeled backwards over!")
  end
end

setLabelWheelCallback( "compassNorthImage", "onWheelNorth" )

-- you can also use them within tables:
mynamespace = {
  onWheelNorth = function()
    echo("the north button was wheeled over!")
  end
}

setWheelReleaseCallback( "compassNorthImage", "mynamespace.onWheelNorth" )

setLink

setLink([windowName], command, tooltip): Turns the selected text into a clickable link - upon being clicked, the link will do the command code. Tooltip is a string which will be displayed when the mouse is over the selected text.

Parameters

windowName:

(optional) name of a miniconsole or a userwindow in which to select the text in.

command:

command to do when the text is clicked, as text or Lua function.

tooltip:

tooltip to show when the mouse is over the text - explaining what would clicking do.

Example

-- you can clickify a lot of things to save yourself some time - for example, you can change
--  the line where you receive a message to be clickable to read it!
-- perl regex trigger:
-- ^You just received message #(\w+) from \w+\.$
-- script:
selectString(matches[2], 1)
setUnderline(true) setLink([[send("msg read ]]..matches[2]..[[")]], "Read #"..matches[2])
resetFormat()

-- example of selecting text in a miniconsole and turning it into a link:
HelloWorld = Geyser.MiniConsole:new({
  name="HelloWorld",
  x="70%", y="50%",
  width="30%", height="50%",
})
HelloWorld:echo("hi")
selectString("HelloWorld", "hi", 1)
setLink("HelloWorld", "echo'you clicked hi!'", "click me!")

setMainWindowSize

setMainWindowSize(mainWidth, mainHeight): Changes the size of your main Mudlet window to the values given.; See Also: getMainWindowSize()

Parameters

mainWidth:

The new width in pixels.

mainHeight:

The new height in pixels.

Example

--this will resize your main Mudlet window
setMainWindowSize(1024, 768)

setMapWindowTitle

setMapWindowTitle(text): Changes the title shown in the mapper window when it's popped out.; See also: resetMapWindowTitle()

Parameters

text:

New window title to set.

Available in Mudlet4.8+

Example

setMapWindowTitle("my cool game map")

setMiniConsoleFontSize

setMiniConsoleFontSize(name, fontSize): Sets the font size of the mini console. see also: setFontSize(), createMiniConsole(), createLabel()

setMovie

setMovie(label name, path to gif)

Adds a gif to the selected label and animates it. Note that gifs are pretty expensive to play, so don't add too many at once.

Some websites you can get gifs from are Tenor and Giphy (not officially endorsed).

Returns true

Available in Mudlet4.15+

Parameters

label name:

name of the label the gif will be animated on

path:

path of the gif file

Example

-- download & show a gif within mudlet
local saveto = getMudletHomeDir().."/kymip.gif"
-- animation credit to https://opengameart.org/content/kymiball-ii-third-prototype-scraps
local url = "https://opengameart.org/sites/default/files/kymip_0.gif"

if downloadHandler then killAnonymousEventHandler(downloadHandler) end
downloadHandler = registerAnonymousEventHandler("sysDownloadDone",
  function(_, filename)
    if filename ~= saveto then
      return true
    end
    
    local width, height = getImageSize(saveto)

    createLabel("kymip", 300, 300, width, height, 0)
    setMovie("kymip", saveto)
    setLabelReleaseCallback("kymip", function() deleteLabel("kymip") end)
  end, true)

downloadFile(saveto, url)

local gifpath = getMudletHomeDir().."/movie.gif"

local width, height = getImageSize(gifpath)

-- create a label with the name mygif
createLabel("mygif", 0, 0, width, height,0)
-- put the gif on the label and animate it
setMovie("mygif", gifpath)

setMovieFrame

setMovieFrame(label name, frame nr)

Jump to a specific frame in the gif.

Returns true if successful, and false if frame doesn't exist.

Available in Mudlet4.15+

Parameters

label name:

name of the gif label

frame nr:

the gif animations frame nr to jump to

Example

-- create a label with the name myMovie
createLabel("myMovie",0,0,200,200,0)

-- puts the gif on the label and animates it
setMovie("myMovie", getMudletHomeDir().."/movie.gif")
--stops the animation
pauseMovie("myMovie")
-- jumps to frame 12 of the animation
setMovieFrame("myMovie", 12)
--start the animation
startMovie("myMovie")

setMovieSpeed

setMovieSpeed(label name, speed in percent)

Set the animation speed, in percent.

Returns true

Available in Mudlet4.15+

Parameters

label name:

name of the gif label

speed in percent:

the gif animations speed in percent for example 50 for 50% speed

Example

-- create a label with the name myMovie
createLabel("myMovie",0,0,200,200,0)

-- puts the gif on the label and animates it
setMovie("myMovie", getMudletHomeDir().."/movie.gif")
--accelerates the animation to a speed of 150%
setMovieSpeed("myMovie",150)

setOverline

setOverline([windowName], boolean): Sets the current text font to be overlined (true) or not overlined (false) mode. If the windowName parameters omitted, the main screen will be used. If you've got text currently selected in the Mudlet buffer, then the selection will be overlined. Any text you add after with echo() or insertText() will be overlined until you use resetFormat().

windowName:

(optional) name of the window to set the text to be overlined or not.

boolean:

A true or false that enables or disables overlining of text

Example

-- enable overlined text
setOverline(true)
-- the following echo will be have an overline
echo("hi")
-- turns off bolding, italics, underlines, colouring, and strikethrough (and, after this and reverse have been added, them as well). It's good practice to clean up after you're done with the formatting, so other your formatting doesn't "bleed" into other echoes.
resetFormat()

Available in Mudlet3.17+

setPopup

setPopup([windowName], {lua code}, {hints}): Turns the selected() text into a left-clickable link, and a right-click menu for more options. The selected text, upon being left-clicked, will do the first command in the list. Upon being right-clicked, it'll display a menu with all possible commands. The menu will be populated with hints, one for each line.

Parameters

windowName:

the name of the console to operate on. If not using this in a miniConsole, use "main" as the name.

This argument was ignored before Mudlet 4.11.

{lua code}:

a table of lua code to do, in text strings or as functions (since Mudlet 4.11), i.e. {[[send("hello")]], function() echo("hi!") end}

{hints}:

a table of strings which will be shown on the popup and right-click menu. ie, {"send the hi command", "echo hi to yourself"}.

Example

-- In a `Raising your hand in greeting, you say "Hello!"` exact match trigger,
-- the following code will make left-clicking on `Hello` show you an echo, while right-clicking
-- will show some commands you can do.

selectString("Hello", 1)
setPopup("main", {function() send("bye") end, function() echo("hi!") end}, {"send 'bye' to the MUD", "click to echo 'hi!'"})

-- alternatively, put command as text (in [[ and ]] to use quotation marks inside)
setPopup("main", {[[send("bye")]], [[echo("hi!")]]}, {"send 'bye' to the MUD", "click to echo 'hi!'"})

setProfileStyleSheet

setProfileStyleSheet(stylesheet): Sets a stylesheet for the current Mudlet profile - allowing you to customise content outside of the main window (the profile tabs, the scrollbar, and so on). This function is better than setAppStyleSheet() because it affects only the current profile and not every other one as well.

setReverse

setReverse([windowName], boolean): Sets the current text to swap foreground and background color settings (true) or not (false) mode. If the windowName parameters omitted, the main screen will be used. If you've got text currently selected in the Mudlet buffer, then the selection will have it's colors swapped. Any text you add after with echo() or insertText() will have their foreground and background colors swapped until you use resetFormat().

windowName:

(optional) name of the window to set the text colors to be reversed or not.

boolean:

A true or false that enables or disables reversing of the fore- and back-ground colors of text

Example

-- enable fore/back-ground color reversal of text
setReverse(true)
-- the following echo will have the text colors reversed
echo("hi")
-- turns off bolding, italics, underlines, colouring, and strikethrough (and, after this and overline have been added, them as well). It's good practice to clean up after you're done with the formatting, so other your formatting doesn't "bleed" into other echoes.
resetFormat()

Available in Mudlet3.17+

Note: Although the visual effect on-screen is the same as that of text being selected if both apply to a piece of text they neutralise each other - however the effect of the reversal will be carried over in copies made by the "Copy to HTML" and in logs made in HTML format log file mode.

setStrikeOut

setStrikeOut([windowName], boolean): Sets the current text font to be striken out (true) or not striken out (false) mode. If the windowName parameters omitted, the main screen will be used. If you've got text currently selected in the Mudlet buffer, then the selection will be bolded. Any text you add after with echo() or insertText() will be striken out until you use resetFormat().

windowName:

(optional) name of the window to set the text to be stricken out or not.

boolean:

A true or false that enables or disables striking out of text

Example

-- enable striken-out text
setStrikeOut(true)
-- the following echo will be have a strikethrough
echo("hi")
-- turns off bolding, italics, underlines, colouring, and strikethrough. It's good practice to clean up after you're done with the formatting, so other your formatting doesn't "bleed" into other echoes.
resetFormat()

setTextFormat

setTextFormat(windowName, r1, g1, b1, r2, g2, b2, bold, underline, italics, [strikeout], [overline], [reverse]): Sets current text format of selected window. This is a more convenient means to set all the individual features at once compared to using setFgColor(windowName, r,g,b), setBold(windowName, true), setItalics(windowName, true), setUnderline(windowName, true), setStrikeOut(windowName, true).; See Also: getTextFormat()

Parameters

windowName

Specify name of selected window. If empty string "" or "main" format will be applied to the main console

r1,g1,b1

To color text background, give number values in RBG style

r2,g2,b2

To color text foreground, give number values in RBG style

bold

To format text bold, set to 1 or true, otherwise 0 or false

underline

To underline text, set to 1 or true, otherwise 0 or false

italics

To format text italic, set to 1 or true, otherwise 0 or false

strikeout

(optional) To strike text out, set to 1 or true, otherwise 0 or false or simply no argument

overline

(optional) To use overline, set to 1 or true, otherwise 0 or false or simply no argument

reverse

(optional) To swap foreground and background colors, set to 1 or true, otherwise 0 or false or simply no argument

Example

--This script would create a mini text console and write with bold, struck-out, yellow foreground color and blue background color "This is a test".
createMiniConsole( "con1", 0,0,300,100);
setTextFormat("con1",0,0,255,255,255,0,true,0,false,1);
echo("con1","This is a test")

Note: In versions prior to 3.7.0 the error messages and this wiki were wrong in that they had the foreground color parameters as r1, g1 and b1 and the background ones as r2, g2 and b2.

setUnderline

setUnderline(windowName, bool): Sets the current text font to underline/non-underline mode. If the windowName parameters omitted, the main screen will be used.

setUserWindowTitle

setUserWindowTitle(windowName, text): sets a new title text for the UserWindow windowName

Parameters

windowName:

Name of the userwindow

text

new title text

Available in Mudlet4.8+

setUserWindowStyleSheet

setUserWindowStyleSheet(windowName, markup): Applies Qt style formatting to the border/title area of a userwindow via a special markup language.

Parameters

windowName:

Name of the userwindow

markup

The string instructions, as specified by the Qt Style Sheet reference.

Note that when you dock the userwindow the border style is not provided by this

Available in Mudlet4.10+

Example

-- changes the title area style of the UserWindow 'myUserWindow'
setUserWindowStyleSheet("myUserWindow", [[QDockWidget::title{ 
    background-color: rgb(0,255,150);
    border: 2px solid red;
    border-radius: 8px;
    text-align: center;    
    }]])

setWindow

setWindow(windowName, name, [Xpos, Ypos, show]): Changes the parent window of an element.

Available in Mudlet4.8+

Parameters

windowName:

Name of the userwindow which you want the element put in. If you want to put the element into the main window, use windowName "main".

name

Name of the element which you want to switch the parent from. Elements can be labels, miniconsoles and the embedded mapper. If you want to move the mapper use the name "mapper"

Xpos:

X position of the element. Measured in pixels, with 0 being the very left. Passed as an integer number. Optional, if not given it will be 0.

Ypos:

Y position of the element. Measured in pixels, with 0 being the very top. Passed as an integer number. Optional, if not given it will be 0.

show:

true or false to decide if the element will be shown or not in the new parent window. Optional, if not given it will be true.
Example

setWindow("myuserwindow", "mapper")
-- This will put your embedded mapper in your userwindow "myuserwindow".

setWindowWrap

setWindowWrap(windowName, wrapAt): sets at what position in the line the will start word wrap.

Parameters

windowName:

Name of the "main" console or user-created miniconsole which you want to be wrapped differently. If you want to wrap the main window, use windowName "main".

wrapAt:

Number of characters at which the wrap must happen at the latest. This means, it probably will be wrapped earlier than that.

Example

setWindowWrap("main", 10)
display("This is just a test")

-- The following output will result in the main window console:
"This is
just a
test"

setWindowWrapIndent

setWindowWrapIndent(windowName, wrapTo): sets how many spaces wrapped text will be indented with (after the first line of course).

Parameters

windowName:

Name of the "main" console or user-created miniconsole which you want to be wrapped differently. If you want to wrap the main window, use windowName "main".

wrapTo:

Number of spaces which wrapped lines are prefixed with.

Example

setWindowWrap("main", 10)
setWindowWrapIndent("main", 3)
display("This is just a test")

-- The following output will result in the main window console:
"This is
   just a
   test"

showCaptureGroups

showCaptureGroups(): Lua debug function that highlights in random colors all capture groups in your trigger regex on the screen. This is very handy if you make complex regex and want to see what really matches in the text. This function is defined in DebugTools.lua.

Example: Make a trigger with the regex (\w+) and call this function in a trigger. All words in the text will be highlighted in random colors.

showMultimatches

showMultimatches(): Lua helper function to show you what the table multimatches[n][m] contains. This is very useful when debugging multiline triggers - just doing showMultimatches() in your script will make it give the info. This function is defined in DebugTools.lua.

Example

See How to use multimatches[n][m] for a more thorough explanation including examples.

showWindow

showWindow(name): Makes a hidden window (label or miniconsole) be shown again.

startMovie

startMovie(label name)

Starts the gif animation - if it was previously stopped or paused.

Returns true

Available in Mudlet4.15+

Parameters

label name:

name of the gif label

Example

-- create a label with the name myMovie
createLabel("myMovie",0,0,200,200,0)

-- puts the gif on the label and animates it
setMovie("myMovie", getMudletHomeDir().."/movie.gif")
--stops the animation
pauseMovie("myMovie")
--restart the animation
startMovie("myMovie")

showColors

showColors([columns], [filterColor], [sort]): shows the named colors currently available in Mudlet's color table. These colors are stored in color_table, in table form. The format is color_table.colorName = {r, g, b}.

showGauge

showGauge(gaugeName): shows the given gauge, in case it was hidden previously.

showToolBar

showToolBar(name): Makes a toolbar (a button group) appear on the screen.

Parameters

name:

name of the button group to display

Example

showToolBar("my attack buttons")

suffix

suffix(text, [writingFunction], [foregroundColor], [backgroundColor], [windowName]): Suffixes text at the end of the current line. This is similar to echo(), which also suffixes text at the end of the line, but different - echo() makes sure to do it on the last line in the buffer, while suffix does it on the line the cursor is currently on.

Parameters

text

the information you want to prefix

writingFunction

optional parameter, allows the selection of different functions to be used to write the text, valid options are: echo, cecho, decho, and hecho.

foregroundColor

optional parameter, allows a foreground color to be specified if using the echo function using a color name, as with the fg() function

backgroundColor

optional parameter, allows a background color to be specified if using the echo function using a color name, as with the bg() function

windowName

optional parameter, allows the selection a miniconsole or the main window for the line that will be prefixed

setCommandBackgroundColor

setCommandBackgroundColor([windowName], r, g, b, [transparency]): Sets the background color for echo of commands. Colors are from 0 to 255 (0 being black), and transparency is from 0 to 255 (0 being completely transparent).

Parameters

windowName:

(optional) name of the label/miniconsole/userwindow to change the background color on, or "main" for the main window.

r:

Amount of red to use, from 0 (none) to 255 (full).

g:

Amount of green to use, from 0 (none) to 255 (full).

b:

Amount of red to use, from 0 (none) to 255 (full).

transparency:

(optional) amount of transparency to use, from 0 (fully transparent) to 255 (fully opaque). Defaults to 255 if omitted.

Available in Mudlet4.17.0+

Example

-- make a red command background color in main console.
setCommandBackgroundColor(255,0,0,200)

setCommandForegroundColor

setCommandForegroundColor([windowName], r, g, b, [transparency]): Sets the foreground color for echo of commands. Colors are from 0 to 255 (0 being black), and transparency is from 0 to 255 (0 being completely transparent).

Parameters

windowName:

(optional) name of the label/miniconsole/userwindow to change the background color on, or "main" for the main window.

r:

Amount of red to use, from 0 (none) to 255 (full).

g:

Amount of green to use, from 0 (none) to 255 (full).

b:

Amount of red to use, from 0 (none) to 255 (full).

transparency:

(optional) amount of transparency to use, from 0 (fully transparent) to 255 (fully opaque). Defaults to 255 if omitted.

Available in Mudlet4.17.0+

Example

-- make a red command foreground color in main console.
setCommandForegroundColor(255,0,0,200)

scrollDown

scrollDown([windowName,] [lines]): Scrolls down in window by a certain number of lines.; See also: getScroll, scrollTo, scrollUp

Parameters

windowName:

(optional) name of the window in which to scroll. Default is the main window.

lines:

(optional) how many lines to scroll by. Default is 1.

Available in Mudlet4.17.0+

Example

-- scroll down by 7 lines
scrollDown(7)

scrollUp

scrollUp([windowName,] [lines]): Scrolls up in window by a certain number of lines.; See also: getScroll, scrollTo, scrollDown

Parameters

windowName:

(optional) name of the window in which to scroll. Default is the main window.

lines:

(optional) how many lines to scroll by. Default is 1.

Available in Mudlet4.17.0+

Example

-- scroll up by 7 lines
scrollUp(7)

scrollTo

scrollTo([windowName,] [lineNumber]): Scrolls window to a specific line in the buffer.
Parameters

windowName:

(optional) name of the window in which to scroll. Default is the main window.

lineNumber:

(optional) target line to scroll to, counting from the top of buffer or with negative numbers to count from the end of buffer. Default is the end of the buffer, to stop scrolling.

See also: getScroll, scrollUp, scrollDown

Available in Mudlet4.17.0+

Example

-- scroll to line 42 in buffer
scrollTo(42)

-- start of session
scrollTo(0)

-- 20 lines ago
scrollTo(-20)

-- chat window to line 30
scrollTo("chat", 30)

-- stop scrolling main window
scrollTo()

-- stop scrolling chat window
scrollTo("chat")

windowType

typeOfWindow = windowType(windowName)

Given the name of a window, will return if it's a label, miniconsole, userwindow or a commandline.

See also: createLabel(), openUserWindow()

Available in Mudlet4.15+

Parameters

windowName:

The name used to create the window element. Use "main" for the main console

Returns

Window type as string ("label", "miniconsole", "userwindow", or "commandline") or nil+error if it does not exist.

Example

-- Create a Geyser label and and check its type
testLabel = Geyser.Label:new({name = "testLabel"})
display(windowType(testLabel.name))  -- displays "label"

-- the main console returns "miniconsole" because it uses the same formatting functions
display(windowType("main")) -- displays "miniconsole"

-- check for the existence of a window
local windowName = "this thing does not exist"
local ok, err = windowType(windowName)
if ok then
  -- do things with it, as it does exist.
  -- the ok variable will hold the type of window it is ("label", "commandline", etc)
else
  cecho("<red>ALERT!! window does not exist")
end

Additional development notes

wrapLine

wrapLine(windowName, lineNumber): wraps the line specified by lineNumber of mini console (window) windowName. This function will interpret \n characters, apply word wrap and display the new lines on the screen. This function may be necessary if you use deleteLine() and thus erase the entire current line in the buffer, but you want to do some further echo() calls after calling deleteLine(). You will then need to re-wrap the last line of the buffer to actually see what you have echoed and get your \n interpreted as newline characters properly. Using this function is no good programming practice and should be avoided. There are better ways of handling situations where you would call deleteLine() and echo afterwards e.g.:

selectString(line,1)
replace("")

This will effectively have the same result as a call to deleteLine() but the buffer line will not be entirely removed. Consequently, further calls to echo() etc. sort of functions are possible without using wrapLine() unnecessarily.

Discord Functions

<translate> All functions to customize the information Mudlet displays in Discord's rich presence interface. For an overview on how all of these functions tie in together, see our Discord scripting overview.</translate>

getDiscordDetail

getDiscordDetail(): <translate> Returns the text used for the Discord Rich Presence detail field. See Discord docs for a handy image reference on where the detail is shown.</translate>

<translate> See also: </translate> setDiscordDetail

Available in Mudlet3.14+

<translate> Example</translate>

print("<translate><!--T:130--> Discord detail is: </translate>".. getDiscordDetail())

getDiscordLargeIcon

getDiscordLargeIcon(): <translate> Returns the large icon name used for the Discord Rich Presence. See Discord docs for a handy image reference on where the large icon is shown.</translate>

<translate> See also: </translate> setDiscordLargeIcon

Available in Mudlet3.14+

<translate> Example</translate>

print("<translate><!--T:135--> Discord large icon is: </translate>".. getDiscordLargeIcon())

getDiscordLargeIconText

getDiscordLargeIconText(): <translate> Returns the text used as a tooltip for the large icon in the Discord Rich Presence. See Discord docs for a handy image reference on where the large icon is shown.</translate>

<translate> See also: </translate> setDiscordLargeIconText

Available in Mudlet3.14+

<translate> Example</translate>

print("<translate><!--T:140--> Discord large icon tooltip is: </translate>".. getDiscordLargeIconText())

getDiscordParty

getDiscordParty(): <translate> Returns the current and max party values used in the Discord Rich Presence. See Discord docs for a handy image reference on where the the party info is shown.</translate>

<translate> See also: </translate> setDiscordParty

Available in Mudlet3.14+

<translate> Example</translate>

local currentsize, maxsize = getDiscordParty()
print(string.format("<translate><!--T:145--> Discord party: %d out of %d</translate>", currentsize, maxsize))

getDiscordSmallIcon

getDiscordSmallIcon(): <translate> Returns the small icon name used for the Discord Rich Presence. See Discord docs for a handy image reference on where the small icon is shown.</translate>

<translate> See also: </translate> setDiscordSmallIcon

Available in Mudlet3.14+

<translate> Example</translate>

print("<translate><!--T:150--> Discord small icon is: </translate>".. getDiscordSmallIcon())

getDiscordSmallIconText

getDiscordSmallIconText(): <translate> Returns the text used as a tooltip for the small icon in the Discord Rich Presence. See Discord docs for a handy image reference on where the small icon is shown.</translate>

<translate> See also: </translate> setDiscordSmallIconText

Available in Mudlet3.14+

<translate> Example</translate>

print("<translate><!--T:155--> Discord small icon tooltip is: </translate>".. getDiscordSmallIconText())

getDiscordState

getDiscordState(): <translate> Returns the text used for the Discord Rich Presence state field. See Discord docs for a handy image reference on where the state is shown.</translate>

<translate> See also: </translate> setDiscordState

Available in Mudlet3.14+

<translate> Example</translate>

print("<translate><!--T:160--> Discord state is: </translate>".. getDiscordState())

getDiscordTimeStamps

getDiscordTimeStamps(): <translate>Returns the start/end Discord timestamps as set by setDiscordElapsedStartTime() and setDiscordRemainingEndTime().</translate>

<translate> See also: </translate> setDiscordElapsedStartTime, setDiscordRemainingEndTime

Available in Mudlet3.14+

<translate> Example</translate>

display(getDiscordTimeStamps())

resetDiscordData

resetDiscordData()

Reset Discord Rich Presence for current profile to the Mudlet default settings.

See also: setDiscordApplicationID(), setDiscordDetail(), setDiscordState()

Available in Mudlet4.14+

Example

-- Use 'afk' emote in game, clear Discord party status and estimate return
send("afk")
resetDiscordData()
setDiscordState("Back in 15")
setDiscordRemainingEndTime(os.time(os.date("*t"))+(60 * 15))

setDiscordApplicationID

setDiscordApplicationID(id): <translate> Set a custom Discord ID so Discord Rich Presence will show "Playing <your game>" instead of "Playing Mudlet". This function is intended for game authors. Note that you can also set it automatically over GMCP, no pre-installation of scripts required. This will currently (as of Mudlet 4.9.1) bypass the Discord privacy option "Enable Lua API" on future sessions if a non-empty id is specified. Returns true if the Discord application ID is in the correct format.</translate>

<translate> If you're a game author, you can register your game over at Discord to obtain the "client ID" to be used for this function. Once you do so, make sure to upload the games icon as an art asset under the name of server-icon.</translate>

<translate> Mudlet calls this the Application ID to avoid confusion with Mudlet being a game client - however Discord uses both Application ID and Client ID to refer to this detail (which seems to be an 18 digit number).</translate>

<translate> Parameters </translate>

id: <translate> (required) id as a string.</translate>

<translate> See also: </translate> setDiscordGame, usingMudletsDiscordID

Available in Mudlet3.14+

<translate> Example</translate>

-- <translate><!--T:169--> set the ID to Mudlets own as an example</translate>
setDiscordApplicationID("450571881909583884")

Note: <translate> So you do not have to remember that long number you can also reset to the default Mudlet ID by calling this function without an argument:</translate>

setDiscordApplicationID()

setDiscordDetail

setDiscordDetail(text): <translate> Sets the text to be shown in the detail field of Discord Rich Presence. See Discord docs for a handy image reference on where the detail is shown. Note that this will overwrite the same information set by setDiscordGame().</translate>

<translate> See also: </translate> getDiscordDetail, setDiscordGame

Note: <translate> To ensure privacy, the detail will only be shown if the Lua API is enabled and the detail is not hidden.</translate>

Available in Mudlet3.14+

<translate> Example</translate>

-- <translate><!--T:176--> set detail to your character name in-game, as an example</translate>
setDiscordDetail("Vadi")

setDiscordElapsedStartTime

setDiscordElapsedStartTime(time): <translate> Sets the time to be shown for "## elapsed" field in Discord Rich Presence. See Discord docs for a handy image reference on where the elapsed time is shown.</translate>

<translate> Parameters </translate>

time: <translate> (required) time as a Unix time. To get the current Unix time in Lua, use os.time(os.date("*t")).</translate>

<translate> See also: </translate> setDiscordRemainingEndTime

Note: <translate> To ensure privacy, the time will only be shown if the Lua API is enabled and the time is not hidden.</translate>

Available in Mudlet3.14+

<translate> Example</translate>

-- <translate><!--T:184--> set the timer to start counting up from now:</translate>
setDiscordElapsedStartTime(os.time(os.date("*t")))

setDiscordGame

setDiscordGame(text): <translate> Sets the given game to be shown in the "detail" field and the game's icon as the large icon in Discord Rich Presence. See Discord docs for a handy image reference on where the detail and large icon is shown. This is an alternative way of showing which game you're playing - a better way, if you're the game author, is to use GMCP (no pre-installation of scripts required) or setDiscordApplicationID().</translate>

<translate> Currently supported games are: Achaea, Aetolia, Imperian, Luminari, Lusternia, MidMUD, Starmourn, WoTMUD. To add a new game to the list, get in touch.</translate>

<translate> See also: </translate> setDiscordApplicationID

Note: <translate> To ensure privacy, the game and icon will only be shown if the Lua API is enabled, and detail and large icon are set to show.</translate>

Available in Mudlet3.14+

<translate> Example</translate>

setDiscordGame("WoTMUD")

setDiscordGameUrl

setDiscordGameUrl([url], [name])

Set or clear the game Discord invite URL via Lua. It has the same effect as the GMCP message External.Discord.Info.

Available in Mudlet4.14+

Note: This will update the Discord button on the main toolbar, and add an option in the Help menu.

Parameters

url:

(optional) URL of Discord invite

name:

(optional) Name of game

Example

-- set Discord invite to CoffeeMUD
setDiscordGameUrl("https://discord.gg/HgDxtas", "CoffeeMUD")

-- remove the Discord invite
setDiscordGameUrl()

setDiscordLargeIcon

setDiscordLargeIcon(iconName): <translate> Sets the large icon to be shown in Discord Rich Presence. See Discord docs for a handy image reference the icon is shown.</translate>

<translate> Icons supported by default in Mudlet: armor, axe, backpack, bow, coin, dagger, envelope, gem-blue, gem-green, gem-red, hammer, heart, helmet, map, shield, tome, tools, wand, wood-sword (icons credit). To add a new icon to the list, get in touch (the Discord limit is 150 icons).</translate>

<translate> If you're a game author, you can register your own game with Discord and upload your own icons instead of using the ones registered by Mudlet, see setDiscordApplicationID().</translate>

<translate> See also: </translate> getDiscordLargeIcon, setDiscordLargeIconText, setDiscordApplicationID

Note: <translate> To ensure privacy, the icon will only be shown if the Lua API is enabled and the large icon is not hidden.</translate>

Available in Mudlet3.14+

<translate> Example</translate>

setDiscordLargeIcon("coin")
setDiscordLargeIconText("<translate><!--T:198--> Fishing</translate>")
setDiscordState("<translate><!--T:199--> Fishing</translate>")

setDiscordLargeIconText

setDiscordLargeIconText(text): <translate> Sets the tooltip for the large icon in the Discord Rich Presence. See Discord docs for a handy image reference the large icon is shown.</translate>

<translate> See also: </translate> setDiscordLargeIcon

Note: <translate> To ensure privacy, the tooltip will only be shown if the Lua API is enabled, and large icon with the large icon tooltip is set to show.</translate>

Available in Mudlet3.14+

<translate> Example</translate>

setDiscordLargeIcon("axe")
setDiscordLargeIconText("<translate><!--T:205--> Killing heterics</translate>")

setDiscordParty

setDiscordParty(current, max): <translate> Sets the party information the Discord Rich Presence. See Discord docs for a handy image reference the party is shown.</translate>

<translate> Parameters </translate>

current: <translate> (required) current party amount.</translate>
max: <translate> (optional) max party amount - if not provided, then the max is set to the current amount.</translate>

<translate> See also: </translate> getDiscordParty

Note: <translate> To ensure privacy, the party will only be shown if the Lua API is enabled and the party information is not hidden.</translate>

Available in Mudlet3.14+

<translate> Example</translate>

-- <translate><!--T:214--> show that 5 out of 10 people are in currently in the party</translate>
setDiscordParty(5, 10)

setDiscordRemainingEndTime

setDiscordRemainingEndTime(time): <translate> Sets the time to be shown for "## remaining" field in Discord Rich Presence. See Discord docs for a handy image reference on where the remaining time is shown.</translate>

<translate> Parameters </translate>

time: <translate> (required) time as a Unix time. To get the current Unix time in Lua, use os.time(os.date("*t")).</translate>

<translate> See also: </translate> setDiscordElapsedStartTime

Note: <translate> To ensure privacy, the time will only be shown if the Lua API is enabled and the time is not hidden.</translate>

Available in Mudlet3.14+

<translate> Example</translate>

-- <translate><!--T:222--> set the timer to start counting down from an hour from now</translate>
setDiscordRemainingEndTime(os.time(os.date("*t"))+(60 * 60))

setDiscordSmallIcon

setDiscordSmallIcon(iconName): <translate> Sets the small icon to be shown in Discord Rich Presence. See Discord docs for a handy image reference the icon is shown.</translate>

<translate> Icons supported by default in Mudlet: armor, axe, backpack, bow, coin, dagger, envelope, gem-blue, gem-green, gem-red, hammer, heart, helmet, map, shield, tome, tools, wand, wood-sword (icons credit). To add a new icon to the list, get in touch (the Discord limit is 150 icons).</translate>

<translate> If you're a game author, you can register your own game with Discord and upload your own icons instead of using the ones registered by Mudlet, see setDiscordApplicationID().</translate>

<translate> See also: </translate> getDiscordSmallIcon, setDiscordSmallIconText, setDiscordApplicationID

Note: <translate> To ensure privacy, the icon will only be shown if the Lua API is enabled and the small icon is not hidden.</translate>

Available in Mudlet3.14+

<translate> Example</translate>

setDiscordSmallIcon("envelope")
setDiscordSmallIconText("<translate><!--T:230--> Writing letters</translate>")
setDiscordState("<translate><!--T:231--> Writing letters</translate>")

setDiscordSmallIconText

setDiscordSmallIconText(text): <translate> Sets the tooltip for the small icon in the Discord Rich Presence. See Discord docs for a handy image reference the small icon is shown.</translate>

<translate> See also: </translate> setDiscordSmallIcon

Note: <translate> To ensure privacy, the tooltip will only be shown if the Lua API is enabled, and small icon with the small icon tooltip is set to show.</translate>

Available in Mudlet3.14+

<translate> Example</translate>

setDiscordSmallIcon("map")
setDiscordSmallIconText("<translate><!--T:237--> Exploring</translate>")

setDiscordState

setDiscordState(state): <translate> Sets the text to be shown in the state field of Discord Rich Presence. See Discord docs for a handy image reference on where the state is shown.</translate>

<translate> See also: </translate> getDiscordState, setDiscordDetail

Note: <translate> To ensure privacy, the state will only be shown if the Lua API is enabled and the state is not hidden.</translate>

Available in Mudlet3.14+

<translate> Example</translate>

-- <translate><!--T:243--> set state to your current area</translate>
local currentarea = getRoomArea(getPlayerRoom())
local areaname = getAreaTableSwap()[currentarea]
setDiscordDetail(areaname)

usingMudletsDiscordID

usingMudletsDiscordID(): <translate> Returns true if the currently playing game is set to "Mudlet". You can change this with setDiscordApplicationID().</translate>

<translate> See also: </translate> setDiscordApplicationID

Available in Mudlet3.14+

<translate> Example</translate>

if usingMudletsDiscordID() then
  print('<translate><!--T:248--> It is showing "Playing Mudlet" right now!</translate>')
end

Option	Description	Available in Mudlet
enableGMCP	Enable GMCP	4.17
enableMSDP	Enable MSDP	4.17
enableMSSP	Enable MSSP	4.17
enableMSP	Enable MSP	4.17

Option	Description	Available in Mudlet
mapRoomSize	Size of rooms on map	4.17
mapExitSize	Size of exits on map	4.17
mapRoundRooms	Draw rooms round or square	4.17
showRoomIdsOnMap	Show room IDs on all rooms	4.17
show3dMapView	Show map as 3D	4.17
mapperPanelVisible	Map controls at the bottom	4.17
mapShowRoomBorders	Draw a thin border for every room	4.17