All translations

Jump to navigation Jump to search

Enter a message name below to show all available translations.

Message

Found 22 translations.

NameCurrent message text
 h Arabic (ar){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h ar-EG (ar-EG){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h German (de){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h Greek (el){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h English (en){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h en-GB (en-GB){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Colour definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's colour preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h en-PT (en-PT){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h es-ES (es-ES){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h Finnish (fi){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h French (fr){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h Italian (it){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h Korean (ko){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h Dutch (nl){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h Polish (pl){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h pt-BR (pt-BR){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h pt-PT (pt-PT){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h Russian (ru){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h sv-SE (sv-SE){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h Turkish (tr){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h yd (yd){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h zh-CN (zh-CN){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
 h zh-TW (zh-TW){| border="2" cellpadding="4"
!colspan="6" | Built-in Lua Variables
|-
!colspan="2" | Variable Name
!colspan="4" | Description
|-
|colspan="2" | <code>command</code>
|colspan="4" | This variable holds the current user command, i.e. unchanged by any aliases or triggers. This is typically used in alias scripts.
|-
|colspan="2" | <code>line</code>
|colspan="4" | This variable holds the content of the current line as being processed by the trigger engine. The engine runs all triggers on each line as it arrives from the MUD.
|-
|colspan="2" | <code>matches[n]</code>
|colspan="4" | This Lua table is being used by Mudlet in the context of triggers that use Perl regular expressions. 
matches[1] holds the entire match, matches[2] holds the first capture group, matches[n] holds the nth-1 capture group.
If the Perl trigger indicated 'match all' (same effect as the Perl /g switch) to evaluate all possible matches of the given regex within the current line, matches[n+1] will hold the second entire match, matches[n+2] the first capture group of the second match and matches[n+m] 
the m-th capture group of the second match.
|-
|colspan="2" | <code>multimatches[n][m]</code>
|colspan="4" | This table is being used by Mudlet in the context of multiline triggers that use Perl regular expression. It holds the table matches[n] as described above for each Perl regular expression based condition of the multiline trigger. multimatches[5][4] may hold the 3rd capture group of the 5th regex in the multiline trigger. This way you can examine and process all relevant data within a single script.
|-
|colspan="2" | <code>mudlet.translations</code>
|colspan="4" | Contains translations of some common texts (right now, exit directions only) that are helpful to you in Lua scripting, as well as the current language selected for the user interface.  - See [[Special:MyLanguage/Manual:Miscellaneous_Functions#translateTable|translateTable()]]
|-
|colspan="2" | <code>mudlet.key</code>
|colspan="4" | Makes your life easier when creating new keybindings via Lua by translating the key name into the number needed - see [[Special:MyLanguage/Manual:Mudlet_Object_Functions#tempKey|tempKey()]].
|-
|colspan="2" | <code>mudlet.keymodifier</code>
|colspan="4" | Same as <code>mudlet.key</code>, but for keyboard modifiers - Ctrl, Alt, etc.
|-
|colspan="2" | <code>mudlet.supports</code>
|colspan="4" | Lists special functionality that the users Mudlet supports - right now, just <code>mudlet.supports.coroutines</code> is listed. Use <code>mudlet.supports</code> to conditionally enable functionality as it's available on the users Mudlet.
|-
|colspan="2" | <code>color_table</code>
|colspan="4" | Color definitions used by Geyser, cecho, and many other functions - see [[Special:MyLanguage/Manual:UI_Functions#showColors|showColors()]]. The profile's color preferences are also accessible under the <code>ansi_</code> keys.
|}
 
There are other variables that hold MUD-protocol data that are global as well - see [[Special:MyLanguage/Manual:Technical_Manual#Supported_Protocols|Supported Protocols]].
Retrieved from "https://wiki.mudlet.org/w/Special:Translations"